In 2026, ring resizing costs $45 to $150 for most rings. Through our mail-in service, sizing down starts at $45 and sizing up starts at $50, with the final price set by your ring's metal, width, and style — and you see that exact price online before you ship anything.
Walk-in jewelers typically charge somewhere in the $40–$200 range for the same work, but most won't commit to a number until the ring is on their bench. This guide breaks down exactly what moves the price, using our real pricing as the evidence, so you can judge any quote you're given — ours or anyone else's.
Ring resizing cost at a glance
| Metal | Sizing down (from) | Sizing up (from) |
|---|---|---|
| Sterling silver | $45 | $50 |
| 10K yellow gold | $58 | $63 |
| 14K yellow gold | $65 | $70 |
| 18K yellow gold | $81 | $86 |
| 14K white gold | $76 | $81 |
| 18K white gold | $92 | $97 |
| Platinum | $565 | $570 |
These are prices for a plain band under 4mm wide, moving one size. Everything that adds to them is listed below — no surprises at the bench.
Why sizing up costs more than sizing down
Sizing down means cutting a section out of the shank, closing the gap, and soldering one seam. The removed metal is yours — a good shop returns it or credits it.
Sizing up means adding metal. The jeweler cuts the shank, fits a new piece of matching alloy into the gap, and solders two seams instead of one. That inserted gold is bought at today's market price, which is why sizing up starts $5 higher than sizing down, and why each additional size up adds $35.
What drives the price up or down
The metal
Metal is the biggest routine variable. Sterling silver is the baseline. 14K yellow gold adds $20; 18K white gold adds $47. Platinum is its own category — it melts at roughly 3,200°F, needs separate tools to avoid contamination, and the added metal is expensive, which is why a platinum size-up runs $570. If a shop quotes platinum work at yellow-gold prices, ask what alloy they're actually using for the insert.
The width
A band 4mm or wider adds $46 in our pricing. Wide bands take more metal, more heat control, and more finishing time to keep the profile even all the way around.
The style
- Plain band or solitaire: no surcharge — this is the baseline job.
- Class ring or signet: adds $35. The thick shank and side engraving have to be preserved through the cut.
- Soldered set (2+ rings): adds $46. Both shanks are cut and rejoined so the set still sits flush.
- Eternity band: adds $250. Every stone sits directly over the cut line, so the row has to be unset, the shank resized, and the stones reset and re-secured — it's closer to rebuilding the ring than resizing it.
How many sizes you're moving
The base price covers the first size. Each additional size up adds $35, because each size is roughly another millimeter of precious metal in the insert. The math is simple: a 14K yellow gold band going from size 7 to size 9 is $50 base + $20 for the metal + $35 for the second size = $105. Beyond about two sizes in either direction, a good jeweler starts weighing whether the ring's proportions still work — see the FAQ below.
When a ring can't be resized
Some rings shouldn't be cut, and an honest shop will tell you before taking your money:
- Full eternity bands with stones covering the entire shank — there's no bare metal to cut.
- Tension-set rings, where the stone is held by the shank's calibrated spring pressure.
- Rings with patterns, milgrain, or engraving around the full band — the seam would interrupt the design.
- Plated and coated rings, where heat at the seam can discolor or lift the finish (we still size them — gold-plated rings add $23 — but replating may be part of the honest answer).
For these, sizing beads are usually the right call: two small beads soldered inside the shank that keep a loose ring upright and snug without a cut. They start at $40 and are fully reversible.
Ring sizing beads — from $40 →
For the full menu of fixes — beads, guards, inserts, and when each one makes sense — see our guide to every fix for a ring that's too small or too big.
What the bench actually does
A proper resize is a five-step job, and the steps are where cheap providers cut corners:
- Assess: check stones, prongs, and old repair seams under magnification before any heat is applied.
- Cut and fit: saw the shank at the bottom, then remove metal or fit a matched-alloy insert.
- Solder: join the seam with solder matched to the karat and color, so it doesn't show as a faint line later.
- True and check: round the ring on a mandrel and re-check every stone — heat and flexing can loosen settings.
- Finish: polish the full band, and re-plate white gold with rhodium so the seam area matches the rest of the ring.
That last point matters if your ring is white gold: the bright white surface is rhodium plating, and a resize should end with re-plating the band. If you're weighing that separately, our rhodium plating cost guide covers what it costs and how long it lasts.
Red flags with cheap resizing
- Stretching instead of cutting. Rolling a band on a stretcher is fast and cheap, but it thins the shank and can distort settings. It's only defensible on plain bands moving a half size.
- Mismatched solder. Low-karat or off-color solder leaves a visible seam line within months.
- No stone check afterward. If nobody re-tests the stones after heating and bending the shank, a loose stone becomes your problem three weeks later.
- A quote that keeps moving. "Starting at $25" that becomes $90 at pickup usually means the first number was bait. Ask for the all-in price before you hand over the ring.
Worth doing at the same time
The ring is already on the bench, cleaned, and under magnification — which makes a resize the cheapest moment to handle anything else it needs. These are the add-ons we price alongside a resize:
- Tighten stones — $26. Recommended on any stone-set ring being resized, since the shank flexes during the work.
- Remove an existing engraving — $24. If the resize will cut through an inscription anyway, removing it cleanly and re-engraving later beats a truncated message.
- Enamel repair — $32, for signets and class rings where the enamel has chipped near the shank.
- Ring appraisal — $121. The ring is already in a gemologist-adjacent workflow; adding documentation for insurance while it's here saves a second shipment.
How long does resizing take?
The bench work itself is typically under an hour for a plain band and several hours for an eternity band. The realistic timeline for mail-in is transit plus queue: your promised-by date — bench time plus shipping both ways — is shown before you check out, and rush service ($50) moves your ring to the front of the bench. A walk-in jeweler quoting "two to three weeks" isn't slower at soldering — their queue is just opaque. Ask where your ring will physically be during that time; many storefronts mail repairs to a trade shop anyway, without the insurance conversation.
How mail-in resizing works
You configure the job online — metal, width, style, current and target size — and see the full price before checkout. Round-trip shipping is $30, with $100 of coverage included and full-value coverage available at 2.5%, and your ring is photographed when it arrives and again before it ships home, so you can compare the two yourself. Every resize carries a 1-year workmanship guarantee: if the seam or finish fails in normal wear, we make it right.
If you need it fast, rush service is a flat $50.