Jewelry repair questions · Chains, clasps & bracelets

Can a broken hinge on a bangle, bracelet or locket be fixed?

Usually, yes. Hinge failures are mechanical: a worn or bent pin, crushed or misaligned knuckles, or a hinge tube torn away from the piece. Each can be replaced, trued or re-soldered and the action reset. Hinge Repair by mail at JewelryRepair.com starts at $45 in sterling silver; a silver bracelet or bangle hinge is $50.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$50bracelet or bangle hinge in sterling silver ($45 + $5)
$67bracelet or bangle hinge in 14K gold ($45 + $5 + $11 + $6)
$30UPS round trip per order, prepaid label in your account
50,000+repairs since 1989, family jewelers on Lenox Avenue

The short version

  • Most broken hinges can be fixed, on bangles, hinged bracelets, lockets, hinged hoop earrings and hinged clasps. Hinge Repair starts at $45.
  • What fails is almost always one of three parts: the pin, the knuckles it runs through, or the joint that holds the hinge to the piece.
  • A locket that won't stay shut may be the catch rather than the hinge, so the jeweler checks both.
  • A cracked loop at the top of a locket is the bail, not the hinge: Bail Repair, from $39.
  • Glue isn't a hinge repair. It stiffens the action, lets go, and has to be cleaned out before a proper fix.

Prices

Service PriceWhat's included
Hinge Repair from $50 bracelet, sterling silver
from $60 locket booked as Necklace, sterling silver
A worn or bent pin swapped for new wire, damaged knuckles straightened or rebuilt, a hinge tube that tore loose soldered back in line, then the action adjusted until it swings freely and shuts with a firm close. Priced by item type: Earrings or Something else from $45, Bracelet or anklet +$5, Necklace +$15.
Bail Repair from $39 sterling silver
from $63 14K yellow gold
The loop at the top of a locket, if it has cracked or worn thin from the chain: soldered and re-rounded, or replaced to match.
Bangle Reshaping from $85When a hinged bangle won't latch because the frame itself was bent out of round: worked back to shape on a mandrel and checked for stress cracks.
Mail-In Evaluation $19For a mechanism you can't diagnose or a fragile antique: examined under magnification, with photos and an itemized quote. Credited in full toward approved work.

How a jewelry hinge works, and what wears out

A hinge on a locket or bangle is a row of short tubes, called knuckles, attached alternately to the two halves, with a wire pin running through all of them. Every opening turns the pin inside the knuckles, so over years the pin wears thin and the holes wear oval: the wobble you can feel. Erhard Brepohl's goldsmithing text, published on Ganoksin, notes that a well-cared-for hinge can last several generations, and that twisting a hinge sideways shortens its life.

  • A loose hinge wobbles or lets the halves twist. Brepohl notes that tapping the ends of the rivet pin may tighten a hinge that's simply loose.
  • A bent hinge stops the halves meeting, often after a bangle is forced open too far or knocked sideways.
  • A missing pin lets the halves come apart.
  • A torn or worn-through hinge, a knuckle cracked away or tubing worn through, is the serious case; Brepohl's advice is that the whole hinge then has to be rebuilt.

Match the symptom to the problem

  • Bangle wobbles at the hinge but closes: worn pin and knuckles.
  • Bangle won't close, or the halves don't line up: a bent hinge, a bent frame or both. If the frame is out of round, Bangle Reshaping goes in the same order; see can a bent or dented bangle be fixed.
  • Bangle pops open on its own: often the catch. A box catch's springy tongue loses tension over time, and Brepohl warns that prying it up with a knife is a short-term fix that can snap it.
  • Locket falls open: usually a worn catch or a loosened hinge, so the halves no longer meet with tension.
  • Locket won't open: a bent hinge or crushed knuckle. Don't force it with a blade.
  • Locket in two pieces: the pin came out or the hinge tore away; keep every part.
  • Hinged hoop won't click shut: see how to fix a hoop earring that won't close.

How a jeweler repairs a hinge

Fixing a hinge is closer to fine mechanics than to ordinary jewelry repair. At the New York studio, the jeweler first finds the part that gave out:

  • Pin: the old pin comes out and new wire goes in. Brepohl recommends new wire of the same gauge over reusing the old pin, removing a rivet by filing off one end and pushing it through.
  • Knuckles: flattened or misaligned tubes are straightened or rebuilt so the new pin runs true through every one.
  • A hinge tube that tore loose: soldered back in line. This is the delicate step: in a Ganoksin trade article on laser welding, a jeweler describes the risk of solder flowing into a hinge and freezing it.
  • Action: finally the hinge is adjusted until it swings freely, shuts with a firm close and holds the tension the maker intended, rather than just moving again.

Everything is photographed on arrival; if the mechanism needs more than a standard repair, you're contacted before any work. A second jeweler checks the finished hinge, and the piece is photographed again before it ships back.

Lockets: what's worth knowing

  • Take out photos and keepsakes before you ship. Photographs or a lock of hair can't be replaced and don't belong near heat or a polishing wheel. Mention a glass front, so it's protected.
  • Victorian and mourning lockets: around 1860, memento lockets began replacing mourning rings as the preferred mourning jewelry, according to Wikipedia, so many inherited lockets are old and worn thin at the hinge. Hinge Repair takes them, or the $19 Mail-In Evaluation examines the whole piece first.
  • A worn monogram or new inscription: Necklace & Pendant Engraving covers lockets, from $60.

The locket bail: the other common break

The loop at the top of a locket, the bail, carries the locket's whole weight on the chain and is rubbed by it every day, so it wears thin from the inside and can crack or split at its seam. That's a separate fix from the hinge, and both can go in one order:

  • A clean split in a bail with enough metal left is soldered closed and rounded again.
  • A bail worn thin is replaced with a new one to suit the locket; on enameled, plated or stone-set lockets, Bail Repair works with a laser to keep heat away from them.
  • A check worth doing: look inside the bail where the chain sits; a bright, flattened spot there means it's wearing.

More on bails, including when the small ring below the bail is what failed, in can a broken pendant bail be repaired.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026, each including a clean and polish and the 1-year workmanship guarantee; shipping is $30 round trip per order, however many pieces are in the box.

  • Bracelet or bangle hinge: $50 in sterling silver ($45 + $5); $67 in 14K gold ($45 + $5 + $11 + $6); $81 in 18K ($45 + $5 + $11 + $20); $145 in platinum ($45 + $5 + $95).
  • Locket hinge: Hinge Repair is priced by item type, and the page doesn't list lockets by name. Booked as Necklace it's $60 in sterling silver ($45 + $15), $77 in 14K gold ($60 + $11 + $6) and $91 in 18K ($60 + $11 + $20); booked as Something else it starts at $45. If you're unsure which to choose, ask through the on-site chat or the contact page before ordering.
  • Hinged earrings: $45 in silver; $62 in 14K gold ($45 + $11 + $6).
  • Locket bail: Bail Repair, $39 in sterling silver or $63 in 14K yellow gold ($39 + $20 + $4).
  • Gold-plated or fashion pieces: not a listed metal, and solder heat can mark plating, so they start with a free quote.
  • Not sure what failed: the $19 Mail-In Evaluation, credited in full toward approved work.

Before you ship

  • Empty the locket and keep loose parts together: a pin that fell out, or both halves of a separated locket, in a small sealed bag inside the package.
  • Send the chain or the pair: a locket's chain and both hoop earrings ride in the same box for the same $30.
  • A designer piece under the maker's warranty or service plan: check with the maker first, because outside work can void it. JewelryRepair.com is independent, not affiliated with any jewelry brand.
  • Pack and cover it: a plain small box with nothing naming the contents, dropped at any UPS location with the prepaid label from your account, signature both ways. $100 of coverage is included each way from UPS's first scan until signed for; full value up to $10,000 is 2.5% of the value above $100, both directions: $12.50 for a $600 locket.

Sky Jewelry, family jewelers on Lenox Avenue since 1989, has completed over 50,000 repairs since 1989, and JewelryRepair.com is its mail-in service. At our New York studio the hinge is photographed open and closed on arrival and again before it ships back; a bench jeweler does the work, a second jeweler checks the action, and the repair carries our 1-year workmanship guarantee.

Questions

How much does it cost to fix a locket hinge?
At JewelryRepair.com, Hinge Repair for a locket booked under the Necklace item type is $60 in sterling silver, $77 in 14K gold and $91 in 18K, including a clean and polish and the 1-year workmanship guarantee; the Something else item type starts at $45. Round-trip UPS shipping is $30 per order, and a cracked bail can be fixed in the same box.
Can a broken hinge on a bangle be fixed?
Yes, in most cases. A worn pin is replaced, crushed knuckles are straightened or rebuilt, and a hinge tube torn from the bangle is soldered back in line. Hinge Repair for a bracelet or bangle is $50 in sterling silver and $67 in 14K gold at JewelryRepair.com; if the bangle is also bent, reshaping goes in the same order.
Can an antique or Victorian locket hinge be repaired?
Usually, and it's often worth it. Old lockets tend to be thin at the hinge after decades of opening, so the jeweler judges how much original metal can be kept before rebuilding anything. Hinge Repair starts at $45 in silver, and if the mechanism needs more than a standard repair, you're contacted with photos before any work; or start with the $19 Mail-In Evaluation, credited in full.
Can a broken locket bail be fixed?
Yes. The loop at the top of a locket wears and cracks like any pendant bail: a clean split is soldered and re-rounded, and one worn thin is replaced. Bail Repair at JewelryRepair.com is $39 in sterling silver and $63 in 14K yellow gold, and a loose hinge on the same locket can be repaired in the same order for one $30 shipping charge.
Can I glue a broken locket hinge?
Only as a stopgap on an inexpensive locket. Glue can hold a pin in place but can't replace a torn or worn-through knuckle, it stiffens the action if it creeps into the hinge, and it has to be cleaned out before a jeweler can solder there; pliers can also crack old knuckles. On gold, silver or antique lockets, keep the pieces together and have the hinge repaired.