Jewelry repair questions · Pearls

Can I tie and restring pearls myself, or should a jeweler do it?

You can tie and restring pearls yourself with silk thread, a fine needle, a knotting tool and practice. The hard parts are tight, even knots, thread sized to the drill holes, keeping a graduated strand in order and a secure clasp finish. For valuable or inherited pearls, JewelryRepair.com restrings an 18-inch strand, hand-knotted, for $132.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$13218-inch pearl strand restrung and hand-knotted here ($15 + 18 × $4 + $20 + $25)
2.5–4.5pearl hardness on the Mohs scale, soft enough for steel tools and grit to scratch
3 mmor more: the usual minimum size difference from the ends to the center of a graduated strand (Wikipedia)
50,000+repairs since 1989

The short version

  • Yes, it's a learnable skill. Stringers thread pearls onto silk or synthetic cord with a fine needle, tie a knot after each pearl, slide it snug with an awl or a knotting tool, and finish both ends at the clasp.
  • Practice first. Even, tight knots take repetition. Learn on inexpensive beads, not on the strand you care about.
  • Six common mistakes: knots that slip into the drill holes, loose or uneven knots, pearls out of order, a weak finish at the clasp, scratched nacre and damp thread.
  • Do it yourself for bead strands, costume pearls and practice. Send it out for inherited, natural, fine cultured or graduated pearls, and for anything with missing pearls or a damaged clasp.
  • The professional price is modest: Pearl Restringing here is $15 plus $4 per inch; pearls add $20 and knotting $25.

Prices

Service PriceWhat's included
Pearl Restringing from $15 + $4/inchPearls laid out and restrung in their original order on silk or synthetic thread, knotted between each pearl if you choose, finished securely at the clasp, cleaned and inspected. Pearls rather than beads +$20, hand-knotting +$25, new clasp +$25, rush +$50.
Mail-In Evaluation $19For a strand with missing pearls, damaged drill holes, a worn clasp or several strands: examined under magnification, with photos and an itemized quote, credited in full toward the work you approve.

What the job involves

A knotted strand is simple in principle and fiddly in practice. The supplies:

  • Thread. Silk is traditional and drapes best; synthetic cord resists stretching and moisture. It has to be thick enough that a knot can't pull into a drill hole. Silk is sold in numbered sizes: Fire Mountain Gems' chart for one widely sold brand runs from about 0.3 mm (#0) to 1.05 mm (#16). The right size depends on your pearls' holes, not on the pearls' size.
  • A fine, flexible needle that can follow the thread through the drill holes.
  • Something to place each knot: an awl or fine tweezers, or a purpose-made knotting tool.
  • Clasp-end findings: French wire, also called gimp, a fine coil of wire that sleeves the thread where it loops through the clasp so metal doesn't rub on it, and a tiny amount of jeweler's cement for the final knots.
  • A way to keep order: a grooved bead board, or a towel, so the pearls stay in sequence and don't roll.

The steps, in short. Lay the pearls out in order before you cut anything. Pull the silk taut before you start; GIA notes silk stretches over time, and slack left in now opens gaps later. Attach the first end to the clasp through French wire. Then string a pearl, tie an overhand knot, guide the knot right up against the pearl with the awl or tool and pull it snug, and repeat for every pearl. Finish by attaching the second end to the clasp the same way, working the tail back through the last few pearls, securing it and trimming it close.

Where DIY restringing goes wrong

  • Knots that slip into the holes. Thread too fine for the drill holes makes knots that pull inside the pearls, and the strand loses its spacing and its protection. If a test knot slides into a hole, go up a size or double the thread.
  • Loose or uneven knots. A knot that isn't pushed snug against its pearl leaves a gap, and gaps add up along the strand. Uneven tension is what makes a home-strung necklace hang stiffly or kink instead of draping.
  • Pearls out of order. Wikipedia notes a graduated strand usually steps up at least 3 mm from the ends to the center. Spread across dozens of pearls, neighbors differ by a fraction of a millimeter, so one pearl out of place shows as a bump in the curve. Lay the strand out before the old thread is cut, never after.
  • A weak finish at the clasp. The ends carry the most strain and rub against the clasp ring every time the necklace moves. Without French wire, metal wears directly on the thread; without secure end knots, the whole strand depends on a dot of glue.
  • Damage to the pearls. Pearls rate only 2.5 to 4.5 on the Mohs scale, and because they're mostly calcium carbonate, Wikipedia notes they can be dissolved in vinegar. GIA's 1987 Gems & Gemology study of gemstone durability warns that pearls cannot withstand heat, polishing or harsh cleaning solutions, and that even gold beads strung beside them can abrade and discolor them. It also warns never to polish pearls, because polishing compounds abrade and discolor the nacre, so surface damage can't simply be buffed out. Don't force a needle or ream a tight hole, and keep glue and solvents off the nacre.
  • Damp thread. GIA says to make sure the string is completely dry before a strung necklace is worn, and notes silk can darken, stretch or wear thin over time. Restringing is periodic maintenance, not a one-time job.

Should you do it yourself? An honest guide

Good DIY candidates:

  • Bead strands and costume pearls, where a mistake costs little.
  • Inexpensive pearls you're happy to learn on.
  • An unknotted strand of uniform beads, which skips the hardest part.

Better sent to a jeweler:

  • Inherited, natural or fine cultured pearls, where a damaged or lost pearl is hard to match.
  • Graduated strands, where order is everything.
  • Very small pearls, whose tiny drill holes need very fine thread and needle work.
  • Multi-strand necklaces, strands with spacer bars, or a clasp that's worn or broken; see whether a pearl necklace clasp can be replaced.
  • A broken strand with pearls missing. Matching lost pearls isn't a listed service here and is never guaranteed, so start with the $19 Mail-In Evaluation, and see what to do when a pearl necklace breaks.

If you try it anyway

  • Test one knot against your pearls' holes before stringing the whole strand.
  • Work in good light over a towel, so a dropped pearl doesn't roll away, and stop if a pearl sticks on the needle rather than forcing it.
  • Keep the original clasp and findings; a jeweler can reuse the clasp if you change your mind.
  • For a strand that matters to you, string it unknotted first as a dry run, then knot it once you're confident.

Knotting is covered in more depth in why pearls are knotted between each pearl, and loose pearls with no strand at all in what to do with loose pearls.

What it costs at JewelryRepair.com

Pearl Restringing is priced by length, measured end to end including the clasp: $15 plus $4 per inch. Pearls rather than beads add $20, hand-knotting between each pearl adds $25 and a new clasp $25 (prices from the live repair page, Nov 18, 2026). Knotted pearl strands work out like this:

  • 7-inch bracelet: $88 ($15 + 7 × $4 + $20 + $25).
  • 16-inch choker: $124 ($15 + 16 × $4 + $20 + $25).
  • 18-inch strand: $132, or $157 with a new clasp.
  • 20-inch strand: $140.
  • 24-inch strand: $156.
  • 18-inch bead necklace, unknotted: $87, since beads carry no surcharge.

That covers laying the pearls out in their original order, silk or synthetic thread at the same price, a clean and inspection, and the 1-year workmanship guarantee. Most repairs are back in your hands in about three weeks door to door, and Rush Service ($50) ships an eligible repair back 2 to 3 days sooner. Shipping is $30 round trip per order. The full bench process is in how pearl restringing works, and the pearl restringing cost guide compares knotted and unknotted prices.

Before you ship

  • Count the pearls and photograph the strand before you seal the box, and measure end to end, including the clasp, to set the price.
  • If the strand has broken, put every pearl and the clasp in a small zip bag, in order if you can.
  • Note in the order whether you want silk or synthetic thread, knotted or not.
  • Use any sturdy small box and the prepaid UPS label from your account. Shipping includes $100 of coverage each way; full value can be insured up to $10,000 for 2.5% of the value above $100, both directions: $22.50 for a $1,000 strand (2.5% of $900).

Your pearls are restrung by a bench jeweler at Sky Jewelry's New York studio (family jewelers on Lenox Avenue since 1989, over 50,000 repairs since 1989), photographed on arrival and before they leave, checked by a second jeweler and returned signed for at your door.

Questions

What kind of thread do you use to restring pearls?
Silk is the traditional choice and gives the softest drape; synthetic cord gives up a little suppleness for better resistance to stretching and moisture. Either way, size it to the drill holes so knots can't slip inside: silk comes in numbered sizes, from about 0.3 mm to 1.05 mm in one widely sold brand. JewelryRepair.com restrings on silk or synthetic at the same price.
How do you tie knots between pearls?
Tie a simple overhand knot after each pearl, then guide it right up against the pearl before pulling it tight. An awl or fine tweezers in the loop lets you slide the knot into place; a knotting tool does the same job with less fumbling. The skill is consistency: every knot the same size and snug, so the strand drapes evenly instead of kinking.
Do I need a pearl knotting tool?
No, but it helps. An awl and fine tweezers can place each knot; a knotting tool just makes it easier to land every knot tight against its pearl. Whichever you use, practice on inexpensive beads first. For a strand you value, professional restringing at JewelryRepair.com is $15 plus $4 per inch, with $20 for pearls and $25 for knotting.
Is it cheaper to restring pearls yourself?
In cash, usually yes, if you don't count your time or a restart. The professional price is modest, though: at JewelryRepair.com an 18-inch pearl strand is $107 unknotted or $132 hand-knotted, including a clean, an inspection and a 1-year workmanship guarantee, plus $30 round-trip shipping. On an heirloom or graduated strand, scratched or scrambled pearls cost far more than the saving.
Can I restring a broken pearl necklace if some pearls are missing?
Yes, but it will come out shorter, and on a graduated strand the remaining pearls have to be rebalanced so the largest stays at the center. Matching lost pearls isn't a listed service at JewelryRepair.com and is never guaranteed. For a broken strand with gaps, start with the $19 Mail-In Evaluation, credited in full toward the restringing you approve.