Stones

Nacre

Tweezers arranging a strand of white pearls in a bead tray for restringing

Nacre, also called mother-of-pearl, is the iridescent material a mollusk lays down inside its shell and around a pearl. It is built from microscopic platelets of aragonite, a form of calcium carbonate, stacked in layers with thin organic sheets between them. The quality and thickness of the nacre give a pearl its luster and decide how well it wears.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What nacre is

Nacre is the material pearls are made of, and the same iridescent layer that lines the inside of some mollusk shells, where it is better known as mother-of-pearl. The mollusk deposits it continuously on the inner surface of its shell. When an intruder such as a parasite or a bit of debris gets inside, the mollusk seals it off in successive layers of nacre, which is how a natural pearl forms. In a cultured pearl, a bead or a small piece of tissue is deliberately inserted, and the mollusk coats it with nacre.

Up close, nacre looks like brickwork: hexagonal platelets of aragonite, a form of calcium carbonate, each about 0.5 micrometers thick, separated by thin sheets of organic material. That stacking makes nacre tough for what it is, because cracks are diverted along the organic layers instead of running straight through.

Nacre is also where a pearl's glow comes from. GIA explains that luster is light reflecting off the pearl's surface and from the concentric layers of nacre beneath it. The rainbow sheen has a separate cause: each platelet is about as thick as a wavelength of visible light.

How nacre wears or fails

Nacre is soft. GIA puts pearl at 2.5 to 3 on the Mohs hardness scale, so it scratches easily and should be kept away from sharp or rough objects. Most nacre damage builds up from everyday exposure rather than one accident:

  • Chemicals. GIA warns that hair spray, perfume, makeup and even sweat can harm pearls, and recommends wiping them with a soft, clean cloth each time you take them off.
  • Drying out. Heat from intense light can dry nacre out and crack it, and once dried out, nacre becomes far weaker and brittle.
  • Cleaning machines. GIA rules out ultrasonic and steam cleaners for pearls entirely. Warm, soapy water is fine for an occasional thorough clean, and a strung necklace should be completely dry before it is worn.
  • Thin nacre. A cultured pearl with a thin coat over its bead has weaker luster and is less durable, according to GIA's pearl quality guidance.

Nacre is grown by the mollusk, not applied at a bench, so lost nacre can't be added back. What a jeweler can do is examine the strand under magnification, restring it, fit a new clasp, and tell you what condition the pearls are in before any work.

Signs of thin or worn nacre

  • A dull, chalky look where the pearl used to reflect light sharply.
  • The bead nucleus visible under the nacre; GIA says either of these first two signs means you can assume the nacre is thin.
  • Fine cracks in the surface, which heat and strong light can cause.
  • Scratches on the surface, since nacre is softer than most things it touches.

If you see these on an heirloom strand, don't try to polish them out at home. Start with a free photo quote through the on-site chat or the contact page, or book a Mail-In Evaluation ($19, credited in full toward any work you approve) for a magnified condition check with photos and a quote for any thread or clasp work; if you decline, it ships back with the photos and findings.

Nacre vs mother-of-pearl

They are the same material. "Nacre" is the word for the substance itself, wherever it grows. "Mother-of-pearl" usually means nacre from the inner lining of a shell, cut and shaped for buttons, inlay, earrings, pendants, rings and bracelets. GIA notes that the color of a mollusk's mother-of-pearl layer is often related to the color of the nacre on the cultured pearls it produces.

The practical difference is form: a pearl is nacre built up in rounded layers, while mother-of-pearl jewelry is a cut piece of shell. Because they are the same material, the same cautions make sense for both: keep them away from perfume and cosmetics, and out of ultrasonic cleaners and steam cleaning. More on safe care in how to clean real pearls.

What it costs here

Prices from the live repair pages, Nov 18, 2026:

  • Pearl Restringing: $15 plus $4 per inch, restrung in the original order on silk or synthetic cord. Pearls (rather than beads) add $20, hand-knotting between each pearl adds $25, and a new clasp adds $25. An 18-inch strand of pearls is $107 unknotted or $132 knotted ($15 + 18 × $4 = $87, + $20 for pearls, + $25 for knots).
  • Mail-In Evaluation: $19, credited in full toward approved work, for a strand with damaged nacre or anything you can't diagnose.
  • Shipping: $30 round trip per order by UPS, with the prepaid label in your account and $100 of coverage each way. Insuring a $1,000 strand for its full value adds $22.50 (2.5% of the $900 above $100), one fee for both directions.

Restringing replaces the thread; it doesn't restore luster the nacre has lost. Our Jewelry Spa uses an ultrasonic bath and steam, so it isn't the service for pearls or mother-of-pearl. More on strands: pearl restringing cost, knotted vs unknotted.

Sky Jewelry has been family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. A strand sent to JewelryRepair.com is photographed the day it arrives, recording its condition before any work, and again before it ships back.

Prices at a glance

Service Price What's included
Pearl Restringing from $15 + $4/inch Restrung in the original order on silk or synthetic cord. Pearls (rather than beads) +$20, hand-knotted +$25, new clasp +$25. An 18-inch strand of pearls is $107 unknotted or $132 knotted. Restringing replaces the thread; it does not restore worn nacre.
Mail-In Evaluation $19 For a strand with dull, cracked or worn nacre: a magnified condition check with photos and a quote for any thread or clasp work (worn nacre itself can't be restored). The $19 is credited in full toward approved work; a free photo quote through the on-site chat or the contact page is also an option first.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Is nacre the same as mother-of-pearl?
Yes, they are the same material. Nacre is the iridescent layer a mollusk builds from aragonite platelets and thin organic sheets; mother-of-pearl is the usual name for nacre cut from the inside of a shell for buttons, inlay and jewelry. A pearl is nacre built up in layers around an intruder or, in a cultured pearl, around an inserted bead or piece of tissue.
How can you tell if a pearl has thin nacre?
Thin nacre usually shows as a dull, chalky look or as the bead nucleus visible under the surface, and GIA says either sign means you can assume the nacre is thin. Thin nacre weakens both luster and durability. If you're unsure about an heirloom strand, a $19 Mail-In Evaluation gets it examined under magnification with photos, credited in full toward any work you approve.
Can worn nacre on pearls be repaired?
Not in the sense of rebuilding it: nacre is grown by the mollusk, so lost nacre can't be added back at a jeweler's bench. What can be done is protecting the strand you have, by restringing it when the thread stretches (from $15 plus $4 per inch) and keeping it away from perfume, hair spray, heat and cleaning machines. A $19 Mail-In Evaluation tells you its condition first.
Can you clean pearls in an ultrasonic cleaner?
No. GIA rules out ultrasonic and steam cleaners for pearls. Wipe them with a soft, clean cloth after you wear them, and save warm, soapy water for an occasional thorough clean, letting a strung necklace dry completely before you wear it. For the same reason, our Jewelry Spa, which uses ultrasonic and steam cleaning, isn't the service for pearls.
Will restringing make my pearls shine again?
No, restringing changes the thread, not the pearls' surface. It fixes a stretched or broken strand and brings back a tight, even drape, but luster comes from the nacre, and nacre that has dulled or worn stays that way. Pearl Restringing here is $15 plus $4 per inch; an 18-inch strand of pearls is $107, or $132 hand-knotted, kept in its original order.

All glossary terms · Repair questions · How online jewelry repair works

Sources