Jewelry repair questions · Pearls

Can chipped or cracked mother-of-pearl jewelry be repaired, and how should it be cleaned?

Usually not invisibly. Mother-of-pearl is a soft slice of shell, so a chip or crack can't be filled or polished away; the fix is replacing the shell piece when a match can be found, or repairing the metal around it. Clean it with a soft, barely damp cloth, never acids, ultrasonic or steam. JewelryRepair.com's evaluation is $19.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

2.5Mohs hardness GIA gives pearl, the same nacre mother-of-pearl is made of
$19Mail-In Evaluation for chipped, cracked or loose shell, credited in full
$30round-trip UPS shipping per order, with $100 of coverage each way
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Mother-of-pearl is nacre, the same material as most pearls, cut from the lining of a shell. See nacre in the glossary.
  • It's soft and acid-sensitive. GIA rates pearl at 2.5 on the Mohs scale, and its durability chart says pearl is attacked by all acids and harmed by heat.
  • Chips and cracks don't mend invisibly. The realistic choices are replacing the shell piece, when a match can be found, or leaving a small mark alone.
  • Many repairs are really metal repairs: a broken chain, bail, post or clasp, routine as long as heat stays away from the shell.
  • Clean gently: a soft, barely damp cloth; no acids, abrasives, ultrasonic or steam.

Prices

Service PriceWhat's included
Mail-In Evaluation $19The first step for a chipped, cracked or loose shell piece: examined under magnification, photographed and quoted item by item, including whether the shell can be replaced and whether nearby metal work is safe for it. Credited in full toward the work you approve.
Antique & Heirloom Restoration $19For an antique or heirloom piece with damaged shell: the $19 evaluation tests the metal and maps every worn joint and loose or missing piece under magnification, then each step is quoted item by item with photos before any work. Credited in full.
Pearl Restringing from $15 + $4/inchFor a strand of mother-of-pearl beads, booked with the Beads option: restrung in the original order on silk or synthetic cord. Hand-knotting +$25, new clasp +$25. An 18-inch strand is $87, or $112 knotted.
Chain Soldering from $30A broken chain on a mother-of-pearl pendant: one break joined in sterling silver, $41 in 14K yellow gold. If the pendant can't come off the chain, say so in the order notes; the jeweler confirms heat can be kept clear of the shell before any work.

What mother-of-pearl is, and why it chips

Wikipedia describes nacre as hexagonal platelets of aragonite, a form of calcium carbonate, stacked in layers with thin organic sheets between them. That build makes it surprisingly tough, but its surface is soft. The main commercial sources have been pearl oysters and freshwater pearl mussels, with large sea snails such as the green turban also used. Nacre can be tinted almost any color, and plastic imitations, sometimes called pearloid, look similar at a glance.

The form decides the repair:

  • Inlay. GIA explains that opaque materials such as turquoise, coral and mother-of-pearl are cut to fit metal channels or cells and secured with an adhesive, usually epoxy. Thin pieces with exposed edges are what chip, and a piece held only by adhesive can come loose.
  • Set pieces. Discs, cabochons and carvings held by a bezel or prongs, like a stone.
  • Beads strung on cord, alone or mixed with pearls.
  • Mabé pearls. The International Gem Society describes these as a mother-of-pearl blister, filled and cemented to a mother-of-pearl back, so they're partly shell and partly assembly.

What can and can't be repaired

  • Dull or hazy surface. Often residue from lotion, perfume and skin, which cleaning removes. If it stays dull, the surface itself is worn or etched, and no home product brings that back.
  • Fine scratches. At 2.5 on the Mohs scale, nacre is scratched by most things it touches, and GIA tells jewelers never to polish pearls because the compounds abrade and discolor nacre. Light scratches are best left alone.
  • A chip at an edge. Shell can't be built back up to match its own sheen, so a chip stays a chip. Leave it if it's small and stable, or replace the piece.
  • A crack across a piece. A cracked inlay can shift and shed fragments. Replacing it is the lasting fix; glue only stabilizes it.
  • A piece that fell out. If it's intact, it can often go back in the same seat. Bag it and send it with the jewelry.
  • A piece that's lost. A new piece has to be found or cut to fit and matched for color and sheen. Natural shell varies and dyed shell exists, so an exact match isn't guaranteed.
  • Peeling beads. A coating flaking off to show a different material underneath is typical of coated imitation beads; see can damaged pearls be repaired?

Metal repairs on mother-of-pearl jewelry

Often the shell is fine and the metal broke: a chain, a jump ring, a pendant bail, an earring post or a clasp. Those are standard bench repairs, with one condition: GIA's durability chart says heat can crack, burn or split pearl and turn it brown, and its repair guidance is to remove a stone from the mounting before torch work whenever possible, but a glued shell piece can't always come out safely.

Laser welding puts heat into a tiny spot rather than the whole piece, which helps on posts and joints close to the shell. If the pendant can't come off its chain, say so in the order notes. If a joint can't be made safely next to the shell, JewelryRepair.com tells you before any work, with photos and options.

How to clean mother-of-pearl jewelry

  • After each wear, wipe it with a very soft, clean cloth, the routine GIA recommends for nacre.
  • For a deeper clean of solid shell, use a cloth barely dampened with warm, mildly soapy water, wipe with plain water and dry it straight away. GIA treats warm, soapy water as safe for occasional cleaning of pearls.
  • Don't soak inlay. One inlay maker's care guide advises taking inlaid jewelry off to shower, swim or wash your hands.
  • No acids. GIA says all acids attack pearl, and the Canadian Conservation Institute describes silver dips as an acid plus a complexing agent. Vinegar, lemon juice and silver dip are out.
  • No abrasives, ultrasonic or steam. GIA warns that toothpaste-type cleansers scratch soft stones and rules out ultrasonic and steam for pearls; the International Gem Society says the same for assembled stones such as mabé.
  • Clean the silver separately, with a polishing cloth on the metal only.
  • Dress first, jewelry last. GIA lists hair spray, perfume, cosmetics and perspiration among things that harm pearls. Store it apart in a soft pouch.
  • Strung beads: let the cord dry completely before wearing; see how to clean real pearls.

What it costs at JewelryRepair.com

Mother-of-pearl replacement isn't a menu item, so we won't promise a match we haven't seen. Prices from the live repair pages, Nov 18, 2026:

  • Mail-In Evaluation, $19: a jeweler examines the whole piece under magnification and sends photos and an itemized quote; approve all, some or none. Credited in full. You can also start with a free quote from photos through the on-site chat or the contact page; a jeweler replies within 1 business day.
  • Replacing shell: if the evaluation finds a set shell piece can be matched, options are quoted with photos for your approval before anything is done.
  • Antique pieces: Antique & Heirloom Restoration starts with the same $19 evaluation, then every step is quoted with photos.
  • Metal repairs: Chain Soldering from $30 for one break in sterling silver; Bail Repair from $39; Earring Post Repair $30 a pair in sterling silver; Jump Ring Repair from $19; Clasp Replacement from $48.
  • Bead strands: Pearl Restringing with the Beads option is $15 plus $4 per inch, so an 18-inch strand is $87 ($15 + 18 × $4), or $112 hand-knotted ($87 + $25). More in pearl restringing cost.

JewelryRepair.com is the mail-in side of Sky Jewelry, whose family jewelers on Lenox Avenue have completed over 50,000 repairs since 1989. Each piece is photographed when it reaches our New York studio and again before it ships back; a bench jeweler does the work, a second jeweler checks it, and it carries a 1-year workmanship guarantee. Covering a $400 piece in full for shipping costs $7.50 (2.5% of the $300 above $100), one fee for both directions.

Questions

Can mother-of-pearl be polished?
Not with ordinary jewelry polishing, and not at home. Mother-of-pearl is nacre, rated 2.5 on the Mohs scale, and GIA tells jewelers never to polish pearls because the compounds abrade and discolor nacre. Grime comes off with a soft, barely damp cloth; scratches and acid etching are surface damage that stays.
What happens if mother-of-pearl gets wet?
A splash of clean water won't hurt solid shell; GIA treats warm, soapy water as safe for occasional cleaning of nacre. The risks are soaking and what's in the water: acids attack nacre, inlay makers advise against soaking glued inlay, and strung beads need their cord to dry fully before wearing.
Can a cracked mother-of-pearl inlay be fixed?
Usually by replacing the cracked piece rather than mending it. GIA notes that inlaid shell is cut to fit its metal cell and held with adhesive, usually epoxy, so the lasting repair is removing the damaged piece, cleaning the cell and fitting a new piece matched for color and sheen. A match isn't always possible. At JewelryRepair.com that starts with a free photo quote or the $19 evaluation.
Is mother-of-pearl the same as pearl?
Same material, different form. Both are nacre: layered platelets of aragonite with thin organic sheets between them. Most jewelry pearls are nacre built up in layers inside the mollusk; mother-of-pearl is the nacre lining the shell, cut into discs, beads, carvings and inlay. That's why the same care applies: no acids, heat, ultrasonic or steam.
Can a loose mother-of-pearl inlay be glued back in?
Often, if the piece is intact and you still have it. Inlay is held with adhesive, usually epoxy, so a loose piece goes back by cleaning out the old adhesive and bonding it again in the same cell. Don't push it in with super glue, which makes a proper repair harder. At JewelryRepair.com, send photos for a free quote or book the $19 Mail-In Evaluation, credited in full.