Bench techniques
Ultrasonic cleaner
An ultrasonic jewelry cleaner is a small tank of water or cleaning solution vibrated at ultrasonic frequencies, 20,000 cycles a second or more. The vibration forms millions of tiny bubbles that collapse against the jewelry, scrubbing oil and grime from under stones and inside settings where a brush can't reach.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How an ultrasonic cleaner works
Every ultrasonic cleaner has three parts: a tank that holds the cleaning liquid, a generator that produces a high-frequency electrical signal, and a transducer that turns that signal into mechanical vibration. The vibration travels through the liquid as alternating waves of compression and rarefaction. In each low-pressure phase the liquid is pulled apart into microscopic bubbles; in the next high-pressure phase they implode. That growth and collapse is called cavitation.
A single bubble releases very little energy, but Branson's ultrasonic cleaning primer notes that many millions collapse every second, and because cavitation happens throughout the liquid it scrubs hidden surfaces as well as exposed ones. For jewelry, those hidden surfaces are the lotion, soap and skin oil packed under a center stone, behind a halo or inside a gallery, the places a toothbrush never reaches.
Frequency changes the character of the clean. The same primer says machines running below 20 kHz become noisy, that 20 to 30 kHz suits heavy parts where surface damage isn't a concern, and that as frequency rises the cavities multiply but each releases less energy, which suits small, delicate parts. The physics is the same in a countertop unit and a jeweler's tank; what differs is the judgment about what goes in.
What can and can't go in
GIA's April birthstone guide says diamond, at 10 on the Mohs scale, is usually durable enough for an ultrasonic, but points a diamond with many inclusions or a treatment to gentler cleaning. GIA's ultrasonic guide lists what should stay out of the tank:
- Organic gems: pearls, coral, amber, jet, ivory, tortoise shell and shell cameos.
- Stones sensitive to heat and temperature change, treated or not: tanzanite, opal, moonstone, sunstone, topaz, turquoise, zircon, kunzite, iolite, fluorite, lapis lazuli and malachite.
- Filled or impregnated stones: fracture-filled diamonds, emeralds filled with oil or resin, and anything impregnated or coated with oil, plastic or wax. GIA notes these treatments are not permanent, and that a fracture-filled diamond left in the tank too long can have its filling damaged.
- Heat-treated stones: GIA says to avoid the ultrasonic for any gem whose color was enhanced by heat.
- Star ruby and star sapphire stay out entirely; transparent ruby and sapphire call for caution.
When you can't name a stone or don't know whether it was treated, GIA's advice is to skip the ultrasonic. The same goes for booking: our Jewelry Spa is an ultrasonic service, so don't book it for a piece with pearls, opals, emeralds or stones you can't name. Ask first through the on-site chat or the contact form; a jeweler replies with an itemized quote within 1 business day, and nothing ships until you've seen the price. Or book the $19 Mail-In Evaluation, credited in full toward approved work.
Why it matters for repairs
An ultrasonic cleaner shakes things. GIA's diamond care guide says ultrasonic and steam cleaners can loosen gemstones in their settings. GIA's gem guide adds that the vibration can shake gems loose, or damage them when they're set with their girdles touching, which is common in channel and invisible settings. That's why, as GIA puts it, jewelry professionals examine pieces for loose stones before using these machines, and why its gem guide says to check the setting again after cleaning.
At home, the risk is a stone that was already hanging on by a worn prong: it ends up at the bottom of the tank or goes out with the rinse water. A faint rattle when you tap the piece, a stone that shifts under a fingernail, or a ring that snags on knits are signs to book Stone Tightening (from $50) or Prong Re-Tipping (from $29 for up to four prongs in silver) before the next clean, not after it.
A clean also isn't a polish. Cavitation lifts grime; it doesn't remove the hairline scratches that make metal look dull. That's Jewelry Polishing (from $30), and every repair here already includes a clean and polish.
Ultrasonic cleaner vs steam cleaning
The two get mixed up because jewelers use them back to back, but they work differently and carry different risks. An ultrasonic cleaner works in a tank of liquid: the scrubbing happens wherever the liquid reaches, including under a center stone and inside a gallery, and its risk is vibration, which can shake a stone loose. A steam cleaner works in open air with a jet of heat and pressure that drives residue out and dries the piece; its risk is heat and sudden temperature change. In our Jewelry Spa the ultrasonic goes first and the steam second, followed by a hand polish.
GIA's diamond care guide groups the two together: both can loosen gemstones in their settings, and both are harsher methods it doesn't recommend for home use. For pearls, which GIA classes as organic, the ultrasonic is out; when a strand's cord has stretched or frayed, the fix is Pearl Restringing ($35 plus $4 per inch for pearls: the $15 base plus $20 for pearls), not a bath.
What it costs here
Every repair at JewelryRepair.com already includes a clean and polish. When cleaning is the whole job, these services put your piece through the ultrasonic, each priced live on its page:
- Jewelry Spa: from $44 for a silver ring, earrings or pendant. The metal sets the rest: a 14K yellow gold ring is $59 ($44 + $10 + $5) and a 14K white gold ring $68 ($44 + $19 + $5), and a bracelet or necklace adds $12. The ultrasonic runs first, then steam and a hand polish, and you get a written inspection report.
- Chain Untangling: $15 for the first chain and $15 for each additional one. The knot is relaxed under magnification with no tension on the chain, then each chain goes through an ultrasonic clean to lift the oils that helped it knot.
- Watch Cleaning & Detail: from $185. The bracelet is separated from the case and its links are ultrasonically cleaned, then hand-detailed with brushes and steam; the case back stays sealed and the movement is never opened.
UPS shipping is $30 round trip per order, one prepaid label for the whole box, waiting in your account. Each piece is photographed when it reaches Sky Jewelry's New York studio and again before it leaves; a bench jeweler does the work and a second jeweler checks it, under our 1-year workmanship guarantee. Sky Jewelry has been family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Jewelry Spa | from $44 silver $59 14K yellow gold $68 14K white gold |
An ultrasonic bath first, then pressurized steam and a hand polish, with a written inspection report from the bench. Prices are for a ring, earrings or pendant; a bracelet or necklace adds $12. |
| Chain Untangling | from $15 | Knots relaxed under magnification with the chain under no tension, then each chain ultrasonically cleaned and inspected. |
| The Anniversary Service | $199 | Yearly engagement-ring maintenance: ultrasonic deep clean and steam, magnified inspection, loose stones tightened, re-rhodium on white gold, condition photos. |
| Watch Cleaning & Detail | from $185 | Bracelet separated from the case, links ultrasonically cleaned, then hand-detailed with brushes and steam. The case back stays sealed. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Is it safe to put a diamond ring in an ultrasonic cleaner?
Can an ultrasonic cleaner make stones fall out?
What jewelry should never go in an ultrasonic cleaner?
How much does professional ultrasonic jewelry cleaning cost?
What cleaning solution should go in an ultrasonic jewelry cleaner?
See also
All glossary terms · Repair questions · How online jewelry repair works