Settings & prongs

Prong re-tipping

Fine welding tip touching the prong of a round diamond solitaire

Prong re-tipping is a repair that builds new metal onto the worn tip of a prong, the small claw that holds a stone in its setting. The jeweler laser-welds metal that matches the setting onto the old prong, then shapes the new tip back over the stone so it holds securely again.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What prong re-tipping is

Prong re-tipping rebuilds the part of a prong that does the holding: the tip that curls over the top of the stone. Years of wear thin and flatten it; re-tipping adds a fresh bead of metal and shapes it back over the stone so the prong can hold again.

At JewelryRepair.com, the jeweler laser-welds metal matched to your setting onto each worn prong, seats the new tip back over the stone's crown at the correct angle and polishes it smooth. Every prong on the piece is inspected under the scope, not only the ones you noticed.

A laser concentrates its heat in a very small spot, so a worn prong can be re-tipped with the stone left in place; a Ganoksin trade article notes that the older torch method was impossible next to heat-sensitive stones such as emerald and opal. The same article quotes a designer warning that lasers can damage diamonds, so if a fragile stone, an old repair or an antique setting makes the work look unsafe, the studio tells you before any work begins.

Why prong tips wear down

Prongs are there to take the knocks so the stone doesn't. Every brush against a desk or keyboard takes a little metal from the highest point, the prong tip. GIA's guide to ring settings notes that prongs should be checked occasionally, that their raised edges can catch on fabrics, and that halo settings may need more maintenance to keep their small stones secure.

A thin tip lifts and starts snagging; a snagged tip bends away from the stone; a bent or worn-through prong snaps. With four prongs, losing one leaves three holding the stone with nothing in reserve. Re-tipping is the inexpensive point to step in: for one to four prongs in silver or gold it's a $29 to $65 repair, while a lost stone means replacement plus setting, with the stone priced on top.

Signs of worn prongs, and which repair fits

  • It catches. A ring that snags on sweaters or hair usually has a tip that has worn flat and lifted: that's re-tipping.
  • The tips look flat or thin. Under a 10x loupe, a healthy tip is rounded and covers the edge of the stone; a worn one looks like a flat dot or shows a sliver of gap.
  • The stone clicks or turns. Hold the ring near your ear and tap it gently; a faint click means the stone is moving. If the prongs still have enough metal, that's Stone Tightening (from $50); worn tips need re-tipping.
  • The stone sits crooked or low from the side. One shifted, sunken or tilted stone is Reset Loose Stone ($89 flat), where the seat is re-cut and the stone set level.
  • A prong has snapped or gone missing. That needs a Prong Rebuild; take the ring off until then. If a prong is bent or cracked, book the $19 Mail-In Evaluation and the jeweler tells you which repair it needs.

For an engagement ring, the Anniversary Service ($199) is a yearly deep clean and magnified inspection with loose-stone tightening included; structural work it finds, such as re-tipping, is quoted separately.

Prong re-tipping vs prong rebuild

Both add metal to a prong, and here they're priced the same. The difference is how much prong is left:

  • Re-tipping (Prong Re-Tipping) is for a prong that still stands at full height but whose tip has worn thin. New metal goes on top of the old.
  • A rebuild (Prong Rebuild) is for a prong that has snapped, gone missing or worn down to its base. There's nothing left to tip, so a complete new prong is raised from the base.

Neither is the same as Stone Tightening, which adds no metal. You don't have to diagnose it yourself: the $19 Mail-In Evaluation gets every prong examined under magnification and an itemized quote with photos, with the $19 credited in full toward the repair you approve.

Metal, platinum and counting prongs

The new tip has to match the prong it joins, so the price follows the metal. Platinum is the big step (+$195) because it welds at its own temperatures with its own wire: platinum melts at about 1,768 °C, against about 1,064 °C for pure gold. Many yellow gold rings have a white gold or platinum head, so choose the metal of the prongs, not the band. If you don't know, choose Other / not sure: the metal is tested at no charge, and the exact price is set once it's confirmed.

Prongs are priced in tiers: 1–4 are in the base price, 5–9 add $45, 10–15 add $70 and 16 or more add $125. A four-prong solitaire is the first tier and a six-prong head the second; halos and eternity bands reach the higher tiers. The jeweler confirms the count on arrival, and if the scope changes, you approve it before any work begins.

What it costs here

Prong Re-Tipping prices for 1–4 prongs, from the live repair page on Nov 18, 2026:

  • Sterling silver: $29.
  • Yellow gold: 10K $48 ($29 + $19), 14K $53 ($29 + $19 + $5), 18K $61 ($29 + $19 + $13).
  • White or rose gold: 10K $52 ($29 + $23), 14K $57 ($29 + $23 + $5), 18K $65 ($29 + $23 + $13).
  • Platinum: $224 ($29 + $195).
  • Stainless steel: $54 ($29 + $25).

Re-tipping all six prongs of a 14K white gold solitaire is $102 ($29 + $23 + $5 + $45). Rush is $50. Every price includes a clean and polish and the 1-year workmanship guarantee, which covers the work and the metal added. Our prong repair cost guide compares re-tipping and rebuilds.

Your ring travels by UPS for $30 round trip, with $100 of coverage each way and full-value insurance available for a valuable stone. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989: your ring is photographed on arrival at the New York studio and before it ships back, and a second jeweler checks the work.

Prices at a glance

Service Price What's included
Prong Re-Tipping from $29 sterling silver
$53 14K yellow
$57 14K white or rose
$65 18K white
from $224 platinum
New metal laser-welded onto each worn tip and shaped back over the stone, every prong on the piece inspected under the scope, every stone checked for tightness, a clean and polish, and the 1-year workmanship guarantee. 5–9 prongs +$45, 10–15 +$70, 16 or more +$125; rush +$50.
Prong Rebuild from $29 sterling silver
$57 14K white or rose
For a prong that has snapped, gone missing or worn to its base: what remains is removed down to the base and a complete new prong is raised from welded wire matched to the setting's metal, karat and color. Same metal and prong-count charges as re-tipping.
Stone Tightening from $50 For stones that move while the prongs still have enough metal: secured under 10x magnification by the method each setting needs, on rings, earrings, pendants, necklaces or bracelets. It adds no metal, so it won't rebuild a worn-flat tip.
Mail-In Evaluation $19 Not sure whether you need re-tipping, a rebuild or tightening: every prong examined under magnification, an itemized quote with photos, and the $19 credited in full toward the repair you approve.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

What does prong re-tipping mean?
It means building new metal onto a prong's worn tip so it can hold the stone securely again. The jeweler laser-welds metal matched to the setting onto the old prong, then shapes the new tip back over the stone. It's maintenance done before a stone works loose. At JewelryRepair.com, Prong Re-Tipping starts at $29 for one to four prongs in sterling silver.
How much does it cost to re-tip prongs on a ring?
At JewelryRepair.com, re-tipping one to four prongs costs $29 in sterling silver, $53 in 14K yellow gold, $57 in 14K white or rose gold and $65 in 18K white gold; platinum adds $195. Five to nine prongs add $45, so all six prongs of a 14K white gold solitaire come to $102. Round-trip UPS shipping is $30 per order.
How often should prongs be re-tipped?
There's no fixed schedule: re-tip when the tips show wear, which depends on how often and how hard the ring is worn. GIA advises checking prongs occasionally, and a ring worn every day is the one to check most often. Act when the tips look flat or thin, the ring starts snagging, or the stone moves. For an engagement ring, our yearly Anniversary Service ($199) includes a magnified inspection.
Does the stone have to come out for prong re-tipping?
Usually not. The new metal is laser-welded onto the existing prong and shaped back over the stone while it stays in its setting, because a laser concentrates its heat in a very small spot. Lasers aren't risk-free for every stone, though, so if a fragile stone, an old repair or an antique setting makes the work look unsafe, the studio tells you before any work begins. Re-tipping starts at $29 for one to four prongs.
Can a prong be re-tipped if it broke off?
No. A snapped or missing prong has no tip left to build on, so it needs a Prong Rebuild, where a complete new prong is raised from the base. Rebuilds are priced the same as re-tipping, from $29 for one to four prongs in sterling silver. Take the ring off until it's fixed, because the remaining prongs are holding the stone with nothing in reserve.
Can I mail my ring in for prong re-tipping?
Yes. Choose your metal and prong count on the Prong Re-Tipping page, pay the price shown, and a prepaid UPS label is ready in your account within minutes. Pack the ring in any sturdy small box and drop it at any UPS location. Shipping is $30 round trip with $100 of coverage each way, and the ring is photographed the day it arrives.

All glossary terms · Repair questions · How online jewelry repair works

Sources