Settings & prongs

Pavé setting

Diamond band held in a ring clamp while small stones are set

Pavé (French for paved) is a way of setting many small stones, usually melee diamonds, side by side so the metal seems surfaced with them. Each stone rests in a seat cut into the metal and is locked down by minute metal beads pushed over its edge, so a pavé piece stays sound only as long as those beads do.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What a pavé setting is

Pavé (pronounced pah-VAY) is French for paved, and the name describes the look: a band, halo or other surface so thickly set with small stones that little metal shows. GIA groups pavé with bead setting: many small stones, often melee diamonds of under 1/5 carat each, packed so tightly that they form a honeycomb. It is common along a band or around a center stone as a halo, including on eternity bands.

At the bench in Sky Jewelry's New York studio, setting pavé is seat-by-seat work done under a microscope. The setter trues each seat, the small ledge cut into the metal that carries the stone's girdle, levels the stone with its neighbors, then raises a bead from the metal beside it and pushes it over the girdle to lock the stone down. GIA notes that some pavé uses tiny prongs instead of beads; either way, each stone is held by a few specks of metal.

Why pavé stones come loose

Because every stone depends on metal you can barely see, small changes matter:

  • Beads wear down. They sit right on the surface and take every rub and scrape, and as they round off they cover less of the girdle.
  • The band bends. A ring squeezed out of round changes the shape of every seat along the bend, and the stones there loosen together.
  • A hard knock can push a bead back off its stone.
  • Resizing changes the curve of the band, which is why Ring Resizing here includes a stone check.
  • Ultrasonic and steam cleaners. GIA warns that both can loosen stones in their settings, so keep pavé out of them at home.

A missing small diamond from a band, halo or cluster is one of the most common repairs on the JewelryRepair.com bench. Catching a stone while it is only loose costs less than replacing it.

Signs a pavé stone needs attention

  • It moves or clicks. Press each stone lightly with a fingernail; none should shift. A faint rattle when you tap the ring close to your ear points the same way. That's a job for Stone Tightening.
  • It has sunk, tilted or spins in its seat. Tightening can't fix a stone that has left its seat. It needs Reset Loose Stone, where the seat is re-cut level and the stone set back square.
  • A seat is empty. Have the stones around it checked too, and keep the piece off until it's seen.

Not sure which you're looking at? The $19 Mail-In Evaluation, credited in full, sorts it out under magnification. If a stone came out and you still have it, seal it in a small bag inside the package.

Pavé vs channel setting

Both line a band with small stones, but they hold them differently. In a channel setting, as GIA describes it, a row of stones sits in a narrow groove in the metal, held by the walls on either side. Pavé holds each stone separately with its own beads or tiny prongs, so the surface reads as sparkle rather than a neat row between metal rails.

  • Repairs: loose pavé is tightened bead by bead; a loose channel stone is secured by tightening the channel walls.
  • Setting a replacement: in Diamond Setting, the pavé style adds $5 and channel adds $10.
  • Resizing: GIA cautions that channel-set rings can be hard to resize when the stones run far around the band. Pavé that runs most of the way around raises the same question, so it is judged on the ring itself.

Pavé also differs from a prong setting, where a larger stone stands in its own claws. A halo is a design rather than a setting method, and GIA names halos as one of the usual homes for pavé.

What pavé repair costs here

Prices from the live repair pages, Nov 18, 2026, each including a clean and polish and the 1-year workmanship guarantee:

  • Loose stones: Stone Tightening is $50 in silver, $55 in yellow gold, $60 in white gold and $85 in platinum, for up to eight stones per order, checked under 10x magnification.
  • A sunken, tilted or spinning stone: Reset Loose Stone is $89 flat for one stone. If the stone is lost, the job becomes a replacement plus setting.
  • A missing diamond: Diamond Setting is $5 plus $15 per side diamond, and the pavé style adds $5. Setting one pavé diamond is $25 in silver ($5 + $15 + $5), $38 in 14K yellow gold ($25 + $9 + $4) and $62 in 14K white gold ($25 + $33 + $4); each extra side diamond adds $15. If we source the diamond, it is matched to its neighbors and quoted for your approval before it's set; diamonds you supply pay labor only.
  • A missing colored stone: Gemstone Replacement & Setting is $5 plus $18 per side stone, and pavé adds $6, so one pavé sapphire or ruby in silver is $29 in setting labor.
  • Resizing a pavé band: Ring Resizing includes a stone check, and tightening stones is a $26 add-on. If you're unsure whether your band can be sized, start with the $19 Mail-In Evaluation.
  • Yearly care: The Anniversary Service, $199, includes a deep clean, a magnified inspection and loose-stone tightening.

Every pavé piece is photographed, stones and all, when it reaches the New York studio and again before it ships back. JewelryRepair.com is the mail-in service of Sky Jewelry, whose family of jewelers has made over 50,000 repairs since 1989.

What it costs here

Service Price What's included
Stone Tightening $50 silver
$60 white gold
$85 platinum
Every stone tested for movement under 10x magnification, one at a time, and the loose ones secured by the method their setting needs. Up to eight stones per order; yellow gold is $55.
Reset Loose Stone $89 For one stone that has sunk, tilted or spins in its seat, or came out and you still have it: the seat is re-cut clean and level and the stone set back square. Tightening alone can't fix a stone that has left its seat.
Diamond Setting from $25 one pavé diamond (silver)
from $62 in 14K white gold
Setting labor: $5 base, $15 per side diamond and $5 for the pavé style, plus metal and karat charges. If we source the diamond, it is matched to its neighbors and quoted for your approval before setting; diamonds you supply pay labor only.
Gemstone Replacement & Setting from $29 one pavé side stone (silver) For pavé sapphires, rubies and other colored stones: $5 base, $18 per side stone and $6 for pavé, plus metal charges. Stones you supply pay labor only; sourcing is quoted separately.
The Anniversary Service $199 Yearly engagement-ring maintenance: deep clean, magnified inspection, loose-stone tightening included, re-rhodium on white gold and condition photos. Structural work beyond tightening is quoted separately.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Do pavé diamonds fall out?
They can; a missing small diamond from a band or halo is one of the most common repairs on the JewelryRepair.com bench. Stones work free as their beads wear down, after a hard knock or when the band bends. Catching one while it's only loose costs less: Stone Tightening starts at $50 for up to eight stones, and one replacement pavé diamond is $25 in setting labor in silver. If we source the diamond, it is matched and quoted for your approval before setting; diamonds you supply pay labor only.
How can I tell if a pavé stone is loose?
Press each stone gently with a fingernail and tap the ring close to your ear: a stone that shifts or clicks is loose, and Stone Tightening at JewelryRepair.com, from $50 for up to eight stones, secures it. A stone that has sunk, tilted or spins in its seat needs more than tightening: Reset Loose Stone, $89 flat, re-cuts the seat and sets the stone level. Unsure which you have? The $19 Mail-In Evaluation is credited in full.
Can I clean a pavé ring in an ultrasonic cleaner?
Not at home. GIA warns that ultrasonic and steam cleaners can loosen gemstones in their settings, which is a real risk when each pavé stone is held by tiny beads, and jewelers check for loose stones before using them. For the diamonds themselves, GIA lists household detergents and lint-free cloths as safe. A professional clean comes with every repair at JewelryRepair.com, and The Anniversary Service, $199, adds a magnified inspection and tightening.
Is a pavé ring durable enough for everyday wear?
It can be worn every day, as long as it is checked. Each stone is held by a few tiny beads of metal, and daily wear slowly rounds them down, so pavé rewards a yearly look under magnification. Take it off for heavy work, keep it out of ultrasonic cleaners, and have stones tightened at the first sign of movement. At JewelryRepair.com, The Anniversary Service, $199, covers a yearly inspection with loose-stone tightening included.

All glossary terms · Repair questions · How online jewelry repair works

Sources