Settings & prongs
Prong setting
In a prong setting, a few metal claws rise from the head of the ring, each notched where the stone's widest edge rests, and their tips are pressed down over the top of the stone. Round diamonds usually get four or six. The tips take the daily knocks, so over the years they thin and need re-tipping.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How a prong setting holds a stone
The prongs rise from the head, sometimes called the basket, the small framework that lifts the stone above the band. Partway up each prong the jeweler cuts a notch, the seat, where the stone's girdle (its widest edge) drops in. The metal above the seat, the tip, is then pushed down over the stone's crown. Gripped at several points, usually four or six, the stone is locked between the seats under its girdle and the tips over its top.
Very little metal covers the stone, which is the appeal: the gem shows nearly its whole outline. The trade-off is that a handful of small tips does all the holding.
Common forms of prong setting
- Four or six prongs. Four leave more of the stone on view and can make a round diamond look a touch squarer; six follow the circle and share the grip among more points. Larger stones generally get more prongs.
- Round or claw tips. A round tip sits over the stone as a smooth bead; a claw tapers to a fine point for a crisper outline.
- V-prongs. On cuts with points, such as princess, pear, marquise and heart, a V-shaped prong folds around the corner itself, so the point is shielded by metal instead of left bare.
- Shared prongs. In bands and eternity bands, one prong can grip the edges of two neighboring stones, so one worn prong can loosen two. More on that in whether shared-prong settings are secure.
- A different metal for the head. Some yellow gold rings carry a white gold or platinum head. Prong repairs use metal matched to the prongs, not the band; if you aren't sure, choose Not sure and the metal is tested at no charge.
How a prong setting wears
The tips are the highest metal on the ring, so they meet desks, gloves and car keys first and lose a little with every contact. First they flatten, then they lift enough to catch on knits; a caught prong gets pulled out of line, and one worn through at the top can break. The seats wear too, so a stone can rock even when the tips look fine. On a four-prong head, one missing prong leaves the other three carrying the stone with no margin, which is why a six-prong head is more forgiving. What to look for, and how worn tips are rebuilt, is covered in prong re-tipping.
Prong setting vs bezel setting
A bezel setting holds the stone with a thin rim of metal that runs all the way around its edge, instead of a few separate prongs. The rim covers and protects the girdle, while a prong setting leaves most of the stone exposed.
They also wear and repair differently. Prongs are maintained tip by tip: re-tipped when worn, rebuilt when broken. A bezel has no tips to wear; a loose stone in a bezel is tightened by burnishing the rim back against the stone. The labor charges on Diamond Setting reflect the extra bench work of a bezel: choosing prong adds nothing to the setting labor, while bezel or flush adds $25 to the order.
Which repair a prong setting needs
- Tips worn thin, prongs intact: Prong Re-Tipping laser-welds fresh metal onto each tip, keeping the heat at the tip instead of in the stone.
- A prong snapped, missing or worn down to the head: Prong Rebuild replaces it with a whole new prong welded from wire matched to the setting.
- The stone moves but the prongs are sound: Stone Tightening, from $50: the prongs are pressed back over the stone under 10x magnification.
- The stone sits crooked, has sunk or is out: Reset Loose Stone, $89; the seat is re-cut so the stone sits level. A lost stone becomes replacement plus setting, priced for your approval first.
- Not sure: the $19 Mail-In Evaluation, credited in full toward the repair you approve.
What it costs here
From the live repair pages, Nov 18, 2026: one center diamond set in prongs is $65 in sterling silver ($5 + $60) and $78 in 14K yellow gold ($5 + $9 + $4 + $60), and each side diamond adds $15. Re-tipping or rebuilding up to four prongs starts at $29 in silver; the metal-by-metal list is on prong re-tipping, and our guide to prong repair cost compares the options. Every price includes a clean and polish and the 1-year workmanship guarantee, and shipping is $30 round trip per order.
Prong and setting work is done by hand at the New York studio of Sky Jewelry, the family jewelers on Lenox Avenue since 1989 who run JewelryRepair.com, with over 50,000 repairs since 1989. Each stone is photographed on arrival, so its condition is on record before the work starts.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Diamond Setting | from $65 one center diamond | One center diamond set in prongs in sterling silver ($5 + $60); each side diamond is $15. Choosing prong adds nothing to the setting labor, while bezel or flush adds $25 to the order. Your diamond, or one matched and sourced, with sourcing quoted separately. |
| Prong Re-Tipping | from $29 | New metal laser-welded onto worn tips, 1–4 prongs in sterling silver; gold and platinum add a metal charge, and 5–9 prongs add $45. |
| Prong Rebuild | from $29 | A snapped, missing or worn-to-the-base prong replaced with a new one welded from wire matched to the setting. Same metal and prong-count charges as re-tipping. |
| Stone Tightening | from $50 | Each stone tested for movement under 10x magnification and loose ones secured, prongs pressed and re-seated over the stone; up to eight stones per order. |
| Reset Loose Stone | $89 | One shifted, sunken, tilted or fallen-out stone: the seat is re-cut and the stone set level. If it came out, seal it in a small bag in the package. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Are prong settings secure?
Is a claw setting the same as a prong setting?
Why does my prong setting snag?
Why do princess and pear cuts need V-prongs?
How much does it cost to set a diamond in a prong setting?
See also
All glossary terms · Repair questions · How online jewelry repair works