Jewelry repair questions · Stones & settings

Can a broken or bent prong be repaired?

Yes. A snapped or worn-down prong is rebuilt from its base with new metal matched to the setting, and a thinned tip is re-tipped. A bent prong may only need easing back and the stone re-seated, which the jeweler decides on inspection. At JewelryRepair.com, Prong Rebuild and Prong Re-Tipping each start at $29 for one to four prongs.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$29Prong Rebuild, one to four prongs in sterling silver
$57one to four prongs in 14K white gold ($29 + $23 + $5)
$224one to four platinum prongs ($29 + $195)
50,000+repairs since 1989, family jewelers on Lenox Avenue

The short version

  • Snapped, cracked or missing: the prong is rebuilt from its base with new metal matched to the setting. That's Prong Rebuild, from $29 for one to four prongs.
  • Whole, but worn thin at the tip: the tip is rebuilt instead, with Prong Re-Tipping, also from $29.
  • Bent, but still holding: it may only need easing back over the stone and re-seating, or it may need rebuilding. The jeweler decides under magnification, and you approve any change in scope before work begins.
  • Take the ring off today, and don't bend the prong back yourself. With one of four prongs gone, the center stone can easily fall out.
  • Expect the other prongs to need a look. Loose stones and worn prongs travel together more often than not, so the jeweler checks every prong, not just the one you noticed.

Prices

Service PriceWhat's included
Prong Rebuild from $29For a prong that has snapped, cracked, gone missing or bent too far to trust: what's left is removed to the base and a complete new prong is raised from welded wire matched to the setting's metal, karat and color.
Prong Re-Tipping from $29For a prong that is whole but worn thin or flat at the tip: new metal is laser-welded onto the tip, then shaped and seated back over the stone. Same prices as a rebuild.
Stone Tightening from $50When the prongs are sound but the stone moves: prongs pressed and re-seated under 10x magnification, up to eight stones per order. Yellow gold +$5, white gold +$10, platinum +$35.
Reset Loose Stone $89When the stone has tilted, sunk or fallen out and you still have it: the seat is re-cut clean and level and the stone set back square.
Mail-In Evaluation $19When you can't tell whether a prong is bent, cracked or gone: every prong and stone examined under magnification, with photos and an itemized quote. Credited in full toward the repair.

Broken, bent or worn: how to tell which you have

Look at the ring from the side and from above in good light, ideally with a 10x loupe.

  • Snapped: a short stub, or nothing, where a prong should be, often with a sharp edge that scratches skin or pulls thread. The stone may have tilted toward the gap.
  • Bent outward: the tip has lifted away from the stone, leaving a visible gap. A lifted tip snags more easily from then on.
  • Pushed in or sideways: a knock has pressed the prong onto the stone or out of line. The stone may now sit crooked or lower than before.
  • Cracked: a hairline across the prong, usually at the bend or where it meets the base. It's hard to see without magnification.
  • Worn: tips that look flat, thin or shiny on top. Jewelers Mutual lists a prong that looks shorter than the others, or narrowed to a small rounded top, as a sign the stone is less secure.

Jewelers Mutual also says that a stone which no longer sits level, or has turned, means the prongs aren't gripping it tightly enough. It recommends a professional inspection twice a year; between visits, our prong repair cost guide has a two-minute home check.

Why a bent prong can't always just be bent back

Metal gets harder and more brittle as it's bent, a process engineers call work hardening, and repeated flexing can lead to stress cracks and sudden failure. A prong pulled out by a snag and pushed back has already been bent twice at the same spot.

The stone is at risk too. GIA's study of gemstone durability warns that even a diamond can be damaged if a setter is heavy-handed when bending a prong over its crown, and pliers at a kitchen table give no control over that pressure.

So before anything is moved, the jeweler checks how far the prong has moved, whether it has cracked at the bend, how much metal is left at the tip, and whether the stone is chipped where the prong struck it. A sound prong that has only lifted can often be eased back as part of Stone Tightening. A cracked, thin or sharply bent prong is rebuilt instead, because a re-bent cracked prong can look fine right up until it gives way.

How a jeweler rebuilds or re-tips a prong

At the JewelryRepair.com bench in New York, run by Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989, the ring is photographed on arrival, before anything else, then cleaned so the jeweler can see every prong and stone under magnification, not only the one you noticed.

  • Rebuild: what's left of the failed prong is removed down to its base. New wire matched to the setting's metal, karat and color is welded on and raised into a complete prong: shaped, notched to hold the edge of the stone, bent over it and finished smooth so it doesn't snag.
  • Re-tip: new metal is laser-welded onto the worn tip of a sound prong, then shaped and seated back over the stone at the right angle.
  • Heat control: a laser beam is a concentrated heat source with a small heat-affected zone. GIA's durability study records a torch used during a re-tipping job permanently clouding the stones around it, warns that even diamonds may cloud or crack under a jeweler's torch, and advises taking a stone out of its mounting before repair whenever possible. A Ganoksin article on laser welders says conventional re-tipping with the stone in place is impossible near heat-sensitive stones such as emerald and opal.
  • Check: a second jeweler checks the work, and the ring is photographed again before it ships back, so you can compare the intake and outgoing photos in your account.

What it costs at JewelryRepair.com

Prong Rebuild and Prong Re-Tipping are priced the same, by the prongs' metal and by how many need work (live repair pages, Nov 18, 2026). Every price includes a clean and polish and the 1-year workmanship guarantee.

  • One to four prongs: $29 in sterling silver, $53 in 14K yellow gold ($29 + $19 + $5), $57 in 14K white gold ($29 + $23 + $5), $61 in 18K yellow gold ($29 + $19 + $13) and $224 in platinum ($29 + $195).
  • A whole six-prong head: five to nine prongs add $45, so all six in 14K white gold are $102 ($57 + $45).
  • Prongs sound, stone loose: Stone Tightening is $50 in silver, $55 in yellow gold, $60 in white gold and $85 in platinum, for up to eight stones.
  • The stone has tilted or come out, and you have it: Reset Loose Stone, $89.

Choose the metal of the prongs, not the band: a yellow gold ring often has a white gold or platinum head (see why gold rings have platinum prongs). Not sure? Choose Other / not sure; the metal is confirmed on arrival, and you approve any price change before work begins.

When a prong can't simply be fixed, and the alternatives

  • Most prongs are worn to their bases, or the head itself is cracked. Rebuilding them all is possible at the higher prong tiers, but a new head, or resetting the stone in a new mounting, can be the sounder repair. That goes through Custom Work & Modifications, which starts with a $10 estimate, and your existing stone can be reused.
  • The stone is chipped where the prong hit it. A new prong won't fix a chip; see can a chipped or cracked diamond be fixed?
  • The stone is gone. The prong is rebuilt first; a replacement diamond is set under Diamond Setting, with the diamond itself quoted for your approval before it's set.
  • The ring is under a maker's or retailer's warranty or care plan. Check with them first, because outside work can void it.
  • You can't tell what's wrong. The Mail-In Evaluation is $19, credited in full toward the repair: a jeweler examines every prong and stone under magnification and sends an itemized quote with photos.

Before you ship

Don't glue the stone in place or tape over the prong; see can I glue a stone back into my ring? Keep the ring out of ultrasonic and steam cleaners as well, since GIA notes both can loosen stones in their settings. If the stone has come out, seal it in a small bag and pack it in the box with the ring.

A ring that has lost a prong is worth insuring for its full value on the way in: $100 of UPS coverage is included each way, and covering a $3,000 ring in full adds $72.50 ($2,900 × 2.5%), one fee for both directions. Shipping is $30 round trip per order, with the prepaid label in your account; packing and coverage rules are on shipping and insurance.

Questions

How much does it cost to fix a broken prong on a ring?
At JewelryRepair.com, Prong Rebuild starts at $29 for one to four prongs in sterling silver, plus $30 round-trip UPS shipping per order. Gold and platinum cost more ($57 in 14K white gold, $224 in platinum), and five to nine prongs add $45. The price includes a clean and polish and the 1-year workmanship guarantee, and you see the full price before you ship.
Can I push a bent prong back down myself?
It's better not to. Jewelers Mutual advises against bending a prong back yourself, and GIA warns that heavy-handed pressure on a prong can damage even a diamond. A bent prong may also have cracked at the bend, which you can't see without magnification. Take the ring off, keep it somewhere soft, and let a jeweler decide whether it can be re-seated or needs rebuilding.
Is it safe to wear a ring with a bent or broken prong?
No. GIA notes that if one prong of a four-prong setting is sheared off, the center stone can easily fall out; with six prongs it will likely stay put, but the setting has lost its margin. A lifted prong also snags, which bends it further. Stop wearing the ring until it's repaired, and keep it in a closed bag or box.
Can a prong be repaired without taking the diamond out?
Often, yes. Laser welding concentrates heat in a small spot, so new metal can be added at the tip with the diamond in place. GIA's durability study still advises removing a stone before torch work whenever possible, and heat-sensitive stones such as emerald and opal need extra care. The jeweler decides on arrival, and any change in scope is yours to approve first.
What's the difference between re-tipping and rebuilding a prong?
Re-tipping adds new metal to the worn tip of a prong that is otherwise sound. Rebuilding replaces a prong that has snapped, cracked or worn to its base: what's left is removed and a full new prong is raised from welded wire. At JewelryRepair.com both start at $29 for one to four prongs, priced by the prongs' metal and how many need work.