Sizing

Eternity band

Yellow gold band on a steel ring mandrel during ring resizing

An eternity band, also called an eternity ring, is a ring set with a continuous line of matching stones, usually diamonds. On a full eternity band the stones go all the way around; on a half eternity band they cover only the top, leaving plain metal underneath. That difference decides how easily it can be resized and where it wears.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What an eternity band is

The stones on an eternity band are cut and sized alike so the line reads as unbroken. Common settings include prongs, sometimes shared so one small claw holds two neighboring stones; a channel, where stones sit in a seat cut between two metal walls; pavé, with tiny beads of metal raised over each stone's edge; and individual bezels. Eternity-style rings set with paste or white topaz date to the 1700s; the all-diamond version was promoted by the diamond trade in the 1960s as an anniversary gift to a wife.

Why a full eternity band is hard to resize

A jeweler normally sizes a ring by cutting the band at the bottom, adding or removing metal there, and soldering it closed. A half eternity band has plain metal at the bottom, so it can usually be sized like any ring without touching the stones. On a full eternity band, stones run under the finger too, so there is no bare metal at the bottom to cut. Going up means adding a section and setting matching stones in it; going down means taking a section and its stones out. The spacing has to come out even all the way round, which makes it precise work.

Heat is the other limit. GIA rates diamond among the stones that stand up to most setting, cleaning and repair work, though any stone can crack from thermal shock if a torch heats it too fast or it is cooled while still hot. GIA's durability guide also warns that heat-sensitive stones such as emerald, tsavorite and tanzanite can be damaged by soldering near stones already in place, and advises taking stones out of the mounting before a repair whenever possible. That is one reason the jeweler confirms the plan for your band when it arrives.

How eternity bands wear

  • The underside takes the knocks. On a full eternity band, the stones under your palm press against steering wheels, gym bars, railings and other rings. Their prongs or channel walls wear first.
  • Shared prongs are tiny. One worn claw can loosen two stones at once.
  • Bending loosens stones. A knock that pushes the band out of round can loosen stones along the bent section.

Signs it needs attention: a faint rattle when you tap the ring near your ear; a stone that moves under a fingernail or sits lower than its neighbors; prong tips that have flattened or catch on fabric; a gap in the line where a stone used to be. Take a loose band off and send it in before the stone is lost: tightening keeps the diamond you have, while a lost one means setting labor plus a matched diamond, quoted for your approval.

Full eternity vs half eternity

The two are often confused, and the choice matters later. A half eternity band shows stones across the top, keeps plain metal underneath, sizes more easily and keeps stones away from the spot that takes most knocks. A full eternity band shows stones from every angle, but its size is close to fixed and its underside stones need watching. If your finger size changes from season to season, a half eternity is the practical choice; if you choose full, it pays to buy it in the right size.

What it costs here

  • Resizing: Ring Resizing lists an Eternity style option at +$250, so sizing a silver eternity band down starts at $295 ($45 + $250). With that option, 14K yellow gold starts at $315 ($45 + $13 + $7 + $250), 14K white gold at $326 ($45 + $24 + $7 + $250) and platinum at $815 ($45 + $520 + $250). What your band needs, including any stones a size-up requires, is confirmed when it arrives, and you approve any change in price before work begins. If you're not sure which ring style to choose, for example for a half eternity band, ask for a free quote in the on-site chat; the jeweler confirms the style at intake.
  • Too big: on a half eternity band, Ring Sizing Beads go in the plain metal at the bottom, from $40 in silver, or a sizing bar for $240 ($40 + $200). On a full eternity band, stones sit where the beads would go, so book the $19 Mail-In Evaluation first, credited in full toward the repair, and a jeweler confirms what will work before you pay for one.
  • Loose stones: Stone Tightening from $50; $60 in white gold, $85 in platinum, up to eight stones per order.
  • A missing diamond: Diamond Setting is $5 plus $15 per small side diamond, so setting one in 14K white gold is $57 ($5 + $15 + $33 + $4). The matched diamond is quoted separately, and larger eternity stones are quoted with options you approve before anything is set.

Each price includes a clean and polish and the 1-year workmanship guarantee, and shipping is $30 round trip by UPS. Your band is photographed, stones and all, on arrival in New York and again before it ships back; JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Ring Resizing from $295 eternity style (silver, sizing down) Ring Resizing with the Eternity style option (+$250). Gold and platinum add their metal charge; sizing up adds $5, plus $35 per full size beyond the first. What your band needs, including any stones a size-up requires, is confirmed when it arrives, and you approve any change in price before work begins.
Ring Sizing Beads from $40 Two small beads, or a bar, soldered inside the bottom of the band so a slightly big ring stops spinning without being cut. That spot is plain metal on a half eternity band; on a full eternity band, start with the Mail-In Evaluation.
Stone Tightening from $50 Loose stones tightened under 10x magnification by the method the setting needs, up to eight stones per order.
Diamond Setting from $20 one small side diamond (silver)
from $57 in 14K white gold
Setting labor: $5 base plus $15 per small side diamond, plus metal and karat charges; channel setting +$10. The matched diamond is quoted separately for your approval, and larger eternity stones are quoted with options you approve before anything is set.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Can an eternity ring be resized?
Often, yes, but it depends on how far the stones go around. A half eternity ring has plain metal underneath and can usually be sized like any ring. On a full eternity ring, sizing means adding or removing a section of stones. Ring Resizing lists an Eternity style option from $295 in silver (sizing down); what your band needs, including any stones a size-up requires, is confirmed on arrival, and you approve any change in price first.
What is the difference between a full and half eternity band?
A full eternity band has stones all the way around; a half eternity band has them across the top only, with plain metal underneath. The half version is easier to resize and keeps stones off the underside of the ring, where most knocks land. The full version sparkles from every angle, but its size is close to fixed, so it pays to buy it in the right size.
Why do stones fall out of eternity bands?
Mostly from wear on the small prongs or channel walls that hold them, especially on the underside of a full eternity band, which presses against everything you grip. Where prongs are shared, one worn claw can loosen two stones. Catching it early keeps your original diamond: Stone Tightening starts at $50 for up to eight stones, while a lost one means setting labor ($20 in silver, $57 in 14K white gold for one small side diamond) plus a matched stone, quoted for your approval.
How much does it cost to replace a diamond in an eternity band?
Setting labor for one small side diamond is $20 in sterling silver and $57 in 14K white gold ($5 base, $15 per stone, plus metal and karat charges); channel setting adds $10. The replacement is matched to its neighbors and quoted separately, and you approve the stone and price before it is set; larger eternity stones are quoted with options first. The empty seat is photographed when the ring arrives.
What can I do if my eternity band is too big?
It depends on whether the stones go all the way round. On a half eternity band, Ring Sizing Beads soldered into the plain metal at the bottom stop the ring spinning while still letting it pass your knuckle, from $40 in silver, or a sizing bar for $240. On a full eternity band, where stones sit under the finger, book the $19 Mail-In Evaluation, credited in full, so a jeweler confirms what will work before you pay for a repair.

All glossary terms · Repair questions · How online jewelry repair works

Sources