Sizing
Ring sizing
Ring sizing, or resizing, is changing a ring's inside measurement so it fits. To size down, a jeweler cuts the band and removes metal; to size up, they add new metal matched to the ring's karat and color, then solder and polish the joint until it disappears. The term also means measuring a finger for its ring size.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How ring sizing works at the bench
Sizing down is the simpler job: the jeweler cuts the shank (the band) at the bottom, removes a section of metal, closes the gap and solders it. Sizing up means opening the cut on a steel mandrel and fitting a piece of sizing stock, new metal matched to the ring's karat and color, into the gap before soldering. Either way, the ring is trued round, the seam is filed and polished until it disappears, and the stones are checked, because cutting and heating a band can disturb the settings above it.
White gold gets one more step. Its bright white comes from rhodium plating, and soldering disturbs it, so white gold solder jobs here include rhodium re-plating of the repaired area.
How ring sizes are measured
In the US, ring sizes run in quarter steps. Each whole size adds about 0.032 inch (0.81 mm) to the inside diameter, or about 2.55 mm to the inside circumference. A US size 7 measures about 17.3 mm across the inside and 54.4 mm around. Much of the world uses ISO 8653 instead, where the size is the inside circumference in millimeters, so a US 7 is close to an ISO 54.
To pick a size that will actually fit, GIA's advice comes down to a few rules:
- Fingers shrink in the cold and swell in the heat, and a cool morning can read differently from a warm afternoon, so measure at a normal temperature and a consistent time.
- The ring has to pass the knuckle, so a measurement taken only at the base of the finger can come out too small.
- Wide bands fit more snugly than thin ones and usually need to be a little larger.
- String and paper stretch, curl and ignore the knuckle. A ring that already fits the same finger, measured on a sizer, is more reliable.
For a step-by-step method, see how to find your ring size at home. Not sure of the size you need? Add a note when you order, and the size is confirmed at intake before any work.
Signs a ring needs sizing, and when it needs something else
- It won't pass the knuckle, or leaves a deep groove: size up.
- It spins or slides off easily: size down, as long as it will still come off over the knuckle.
- It fits at the base but spins behind a large knuckle: sizing down would trap it. Ring Sizing Beads (from $40) add two small beads inside the band so it stops turning but still slides over the joint, and they can be removed later. They're also the usual choice for arthritic knuckles.
- A top-heavy ring that tips sideways: beads or a sizing bar hold it upright.
- It's bent or oval: Ring Reshaping (from $53) rounds it first; sizing after reshaping adds $40.
Rings that are harder to size
JewelryRepair.com's resizing guide puts the usual limit at about 2 to 3 sizes in either direction, and Jewelers Mutual cautions that a change of more than two sizes may distort the band or weaken the setting, so a big jump deserves a closer look first. Some designs need more care or a different approach:
- Eternity bands: GIA says eternity rings, with stones around the whole band, can be very difficult to resize. Ring Resizing lists an Eternity style at +$250, so a silver eternity band starts at $295 to size down ($45 + $250). If the bench finds on arrival that a band can't be sized as ordered, any change in scope comes to you for approval before work begins. Unsure about yours? The Mail-In Evaluation ($19, credited in full) gets you photos and a quote first, and can a ring with diamonds on the band be resized covers the options.
- Pavé and channel-set shanks: GIA notes these can't be resized easily, and stones running down the band can loosen as it's cut and reshaped. Add Tighten stones (+$26) when you book.
- Engraved bands: an inscription inside the band can be cut through. Remove an existing engraving is +$24 if you'd rather start fresh.
- Two rings worn as a set: Solder Rings Together (from $62) joins them, and the set is then sized as one ring; the set option on Ring Resizing adds $46.
- Tungsten, titanium, cobalt, ceramic and stainless steel: Jewelers Mutual lists all of these among rings that are difficult or impossible to resize. No resizing price is listed here for tungsten, titanium, cobalt or ceramic, so ask for a free quote. Stainless steel is harder to size than gold or silver but is listed on Ring Resizing (+$58).
Ring sizing vs ring stretching
Stretching is a shortcut sometimes used on plain bands: the ring is forced larger on a stretching machine and no metal is added, so the band can only get thinner as it gets bigger. Jewelers Mutual limits it to plain bands without stones, and to roughly half a size. Sizing with matched sizing stock keeps the band's thickness, and it's the method used here: JewelryRepair.com doesn't offer stretching. More in can a ring be stretched bigger.
What it costs here
On the Ring Resizing page at JewelryRepair.com, the live price is set from the direction, metal, karat, width, style and sizes you choose. Typical totals for a band under 4mm:
- Sterling silver: $45 to size down, $50 to size up one size, $85 to size up two.
- 14K yellow gold: $65 down, $70 up one size. 14K white or rose gold: $76 down.
- 18K yellow gold: $81 down. 18K white gold: $92 down.
- Platinum: $565 down.
- Bands 4mm and wider add $46; class and signet rings add $35; eternity style adds $250.
Shipping is $30 round trip per order by UPS. The ring is photographed on arrival, so its stones and condition are on record before it's cut, and the 1-year workmanship guarantee covers a resize that shifts. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has done over 50,000 repairs since 1989. For more, see how much ring resizing costs and every fix for a ring that's too small or too big.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Ring Resizing | from $45 | Sized with stock matched to the ring's karat and color, soldered, polished and stone-checked. Size down in silver $45, up one size $50, +$35 per extra full size up; 14K yellow $65, 14K white or rose $76, 18K white $92, platinum $565 to size down under 4mm. Bands 4mm and wider +$46; eternity style +$250. |
| Ring Sizing Beads | from $40 | Two small beads soldered inside the band so a ring stops spinning but still passes the knuckle; reversible. $62 in 14K yellow gold, $67 in 14K white; a sizing bar is +$200. |
| Ring Reshaping | from $53 | A bent or oval band rounded on a mandrel, checked for cracks and polished; sizing after reshaping +$40. |
| Solder Rings Together | from $62 | Two rings joined so a set stops spinning; the soldered set is then sized as one ring. |
| Mail-In Evaluation | $19 | For a ring you're unsure about, such as a full eternity band, a big size change or an unusual metal: examined, photographed and quoted before anything is cut. Credited in full toward the repair. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
How much does it cost to resize a ring?
How many sizes can a ring be resized?
Is it cheaper to size a ring down or up?
Can you resize a ring without cutting it?
How long does ring sizing take by mail?
Will resizing loosen the stones in my ring?
See also
All glossary terms · Repair questions · How online jewelry repair works