Sizing
Ring sizing beads
Ring sizing beads are two small balls of metal soldered inside the bottom of a ring's band (at JewelryRepair.com, at about four and eight o'clock). They press against the underside of the finger so the ring stops spinning, while the band keeps its size and still slides over a large knuckle. They can be removed later.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What sizing beads are and how they work
A ring that clears the knuckle and then spins behind it is the problem sizing beads solve. Rather than making the band smaller, the jeweler adds two small metal bumps low inside the shank, which fill the gap behind the knuckle while the ring's actual size stays the same. At JewelryRepair.com the beads are made in the ring's own metal, placed at about four and eight o'clock, soldered on and finished smooth (details on the Ring Sizing Beads page). Because they bear on the underside of the finger, the ring has less room to turn, and a top-heavy ring stays upright.
The 2mm beads used as standard take up roughly half a size, and 3mm beads grip harder. Jewelers Mutual, the jewelry insurer, also treats beads as the low-key choice for about half a size of slack. Some bench jewelers on the Ganoksin forum call them sizing balls; one there prefers to place them at about 4:15 and 7:45, where that jeweler finds them more comfortable on the underside of the finger and better able to grip and stop the ring rolling over.
Who sizing beads suit
- A large knuckle. The ring fits over the knuckle but spins behind it, and sizing it down would trap it.
- Arthritic knuckles. When a ring small enough to stay put can no longer get past a swollen knuckle, beads let a ring that clears the knuckle sit snugly behind it; one jeweler on the Ganoksin forum says arthritic customers swear by them. More in ring options for arthritis or large knuckles.
- Top-heavy rings. A large center stone that rolls sideways even at the right size.
- A ring you may want back as it was. Beads can be removed later if your finger changes, and the band itself isn't cut. If the ring is engraved inside, mention it when you order; the jeweler confirms bead placement at intake.
They are the wrong tool when a ring is too small, which only Ring Resizing fixes.
Signs you need them, and how they feel
- The center stone keeps ending up on the side or palm side of your finger.
- The ring is snug at the knuckle but gaps at the base of the finger.
- A ring sized down to stop spinning now hurts to get on and off.
The beads are smoothed so nothing catches. One jeweler on the Ganoksin forum reports that customers get used to the feel within a few days and stop noticing them; another in the same thread thinks they look uncomfortable and unattractive inside a shank, and Jewelers Mutual notes that many people find a spring insert more comfortable.
Sizing beads vs a sizing bar vs resizing
- Sizing bar. Listed on the same page for +$200. As the guide to every ring-fit fix explains, it is a hinged bar inside the band that closes to keep the ring in place and opens so the ring can come off, suited to a large gap between knuckle and finger. Jewelers Mutual puts bars at the bigger-reduction end of the range.
- Spring insert. A bendable metal strip fitted inside the band; Jewelers Mutual covers it as another option. Spring inserts aren't currently offered here.
- Ring guards. Slip-on plastic or silicone guards are a temporary fix, not a bench repair.
- Resizing. Cutting the band and removing metal makes the ring permanently smaller, from $45 in silver: the cleaner fix when knuckle and finger base are close in size.
What it costs here
The table shows silver and 14K gold; other metals follow the same pattern, such as 18K yellow gold at $67 ($40 + $17 + $10) and platinum at $221 ($40 + $181). If stones sit low on the band near where the beads go, Tighten stones (+$23) is an add-on on the same page. Each price includes a clean and polish and the 1-year workmanship guarantee; shipping is $30 round trip by UPS per order, with $100 of coverage each way.
Beads are added at the New York studio of JewelryRepair.com, run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989, and the ring is photographed on arrival and before it ships back.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Ring Sizing Beads (2mm beads) | from $40 silver from $62 14K yellow from $67 14K white or rose |
Two beads in metal that matches the ring, set low in the band, at about four and eight o'clock, and finished smooth so nothing catches. The 2mm size takes up roughly half a size. Platinum adds $181; a class or signet ring adds $25. |
| Ring Sizing Beads (3mm beads) | from $85 silver from $107 14K yellow |
Larger beads that grip harder, for a ring that is looser on the finger behind the knuckle. |
| Ring Sizing Beads (sizing bar) | from $240 silver from $262 14K yellow |
A hinged bar inside the band: closed, it keeps the ring from shifting; opened, the ring comes off over the knuckle. For a large gap between knuckle and finger. |
| Ring Resizing (for comparison) | from $45 size down, silver from $65 size down, 14K yellow |
The band is cut, a section removed, and the joint soldered and polished. Permanent, so the ring must still pass the knuckle afterward. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
What are sizing beads on a ring?
Are sizing beads better than resizing a ring?
How much smaller do sizing beads make a ring?
Can sizing beads be removed?
Do sizing beads hurt or feel uncomfortable?
See also
All glossary terms · Repair questions · How online jewelry repair works