Sizing

Signet ring

Gold wedding band in an engraving vise with script engraving inside

A signet ring is a ring with a flat, broad top, called the face, made to carry initials, a monogram or a family crest. It began as a working tool: the design was cut in reverse, so pressing the ring into melted sealing wax left a raised, readable seal on a letter or document.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What a signet ring is

A signet has two working parts: the face, a flat table on top that carries the design, and the shank, the band below it. The face is either solid metal or a carved stone set into the metal.

The flat face is left over from the ring's first job as a seal. To print a readable mark in warm wax, the design has to be cut into the surface backwards, as a mirror image; that sunken, reversed cutting is called intaglio. Not every signet works that way: rings engraved the right way round have been made since at least the 16th century, and they read correctly on the hand but can't leave a readable seal. Carnelian, agate and sardonyx were the classic seal stones, because wax lifts off them cleanly. So before re-engraving or removing a design, check whether anyone still uses the ring as a seal.

How a signet ring wears, and why it matters for repairs

  • The face takes the knocks. A flat, polished top shows every scratch and dent. Polishing works by removing a fine layer of surface metal, so each polish also takes a little depth from the engraving, and shallow initials soften over the years. Tell the bench if an engraved face should keep its depth.
  • The heavy head rolls. A top-heavy face swings toward the palm on a slightly loose band. Sizing smaller fixes that when the knuckle allows; if the ring must clear a large knuckle, sizing beads keep the face upright and still let it pass.
  • More metal, more bench work. A signet's head and shoulders carry far more metal than a plain band, so class and signet rings carry their own style charge on Ring Resizing (+$35) and Ring Sizing Beads (+$25).
  • The back of the shank thins. Decades of wear thin the band at the bottom. A worn-thin shank is rebuilt with new metal under Shank Repair: replacing half the band in sterling silver is $120 ($45 + $75), or $140 if it is booked under the Class ring style (+$20); the jeweler confirms the style on arrival.
  • Stone faces need their own check. A loose, chipped or cracked stone face doesn't map to one listed service, so it starts with the $19 Mail-In Evaluation.

Signet ring vs class ring

The two names often get swapped, but they mark different things. A signet ring carries a personal or family mark, such as initials or a crest, on a flat face. A class ring marks a graduation: students and alumni wear it, often with a center stone and with emblems or words chosen for the sides. The custom began with West Point's class of 1835.

At the bench they behave alike, a heavy head on a narrower shank, so JewelryRepair.com books both under the same Class / signet style on Ring Resizing and Ring Sizing Beads. The answer to whether a class ring can be resized covers the class-ring side.

Engraving a signet ring

  • Initials or a short inscription. Ring Engraving machine-cuts script or block lettering from $60, inside or outside the band. If you want it on the face, say so in the location field: the jeweler checks the layout against your ring before anything is cut and contacts you if it won't fit legibly.
  • A monogram or simple crest. Ring Engraving's custom image or font option (+$50) machine-cuts a monogram in a chosen font, or a simple crest from an image: $110 in sterling silver ($60 + $50).
  • A shaded crest or ornament. Hand Engraving is cut with a graver, the style seen on antique signets: from $250 for lettering and $300 for a crest or ornament (+$50), by free quote, and the metal adds up to $158 more. It also re-cuts lettering that years of wear have softened. Reverse-cut seal engraving is not a listed service; ask through the free quote whether it can be done on your ring.
  • Someone else's initials. An inherited signet can be taken back to plain metal with Engraving Removal, from $40. The surface is cut down past the deepest letter and refinished, which takes metal off the face, so plan any new engraving with the bench.

What it costs here

Prices from the live repair pages, Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee:

  • Ring Resizing, Class / signet style: $80 smaller in sterling silver ($45 + $35) and $85 one size larger (sizing up adds $5). In 14K yellow gold it is $100 smaller ($45 + $13 + $7 + $35) and $105 larger. Each full size up beyond the first adds $35, a band 4mm or wider adds $46, and most rings can go about 2 to 3 sizes either way.
  • Ring Sizing Beads: $65 for a signet in sterling silver ($40 + $25), $87 in 14K yellow gold ($40 + $17 + $5 + $25).
  • Engraving: Ring Engraving $60 in silver and $68 in 14K yellow gold ($60 + $6 + $2), or $110 in silver with the custom image or font option; Hand Engraving from $250 for lettering or $300 for ornament, by free quote; Engraving Removal $40 in silver and $48 in 14K yellow gold ($40 + $6 + $2).

Shipping is $30 round trip per order, the same for one ring or several; shipping and insurance explains coverage. Signets are sized and engraved at the New York studio of Sky Jewelry, the family jewelers on Lenox Avenue since 1989 behind JewelryRepair.com, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Ring Resizing from $80 signet The Class / signet style (+$35) on the $45 base: sizing stock matched to the ring's karat and color, soldered, polished and stone-checked. Sizing up adds $5; 14K yellow gold smaller $100.
Ring Sizing Beads from $65 signet Two small beads soldered inside the band ($40 + $25 for a signet in silver) keep a top-heavy face upright and still let the ring pass the knuckle. Reversible.
Ring Engraving from $60 Machine engraving in script or block, inside or outside the band; a monogram in a custom font or a simple crest image adds $50 ($110 in silver). The jeweler confirms the layout fits before anything is cut.
Hand Engraving from $250 Cut by hand with a graver, the style seen on antique signets: lettering from $250, a crest or ornament +$50 (from $300). The metal adds up to $158, and the free quote sets the exact price. Worn antique engraving can be re-cut.
Engraving Removal from $40 An old inscription cut away and the surface refinished to match; if it is too deep to remove safely, you see the options first.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Can a signet ring be resized, and how much does it cost?
Yes, most signet rings can be resized, usually by about 2 to 3 sizes either way. The jeweler cuts the shank at the bottom, adds or removes metal matched to the ring's karat and color, then solders and polishes it. At JewelryRepair.com the Class / signet style on Ring Resizing makes it $80 smaller or $85 one size larger in sterling silver, and $100 smaller in 14K yellow gold, with a 1-year workmanship guarantee.
Can a signet ring with a stone face be resized?
Often, yes. Ring Resizing cuts the shank at the bottom, away from the face, and the bench uses the laser rather than the torch on heat-sensitive settings. Mention the stone face in the order notes; the jeweler checks it on arrival, and you approve any change before work begins. The signet style is $80 smaller in sterling silver at JewelryRepair.com. A stone face that is already loose, chipped or cracked starts with the $19 Mail-In Evaluation.
What does a signet ring symbolize?
A signet ring stands for identity and, historically, authority. Its face carries a personal or family mark, often a crest, and because pressing it into wax once vouched for a letter or document, the ring came to stand for the wearer's power. Today it is worn as a keepsake, a monogram or a sign of membership. At JewelryRepair.com a monogram is machine-engraved from $110 in silver, and a hand-cut crest starts at $300 by free quote.
Can old initials be removed from a signet ring?
Usually, yes. Engraving Removal, from $40 in sterling silver and $48 in 14K yellow gold, cuts the surface down past the deepest letter and refinishes it to match the rest of the ring. If the engraving is too deep to remove safely, you are shown the options before anything is done. Removal takes metal off the face, which matters if you plan to re-engrave it.
Which finger do you wear a signet ring on?
By tradition, the little finger of your less dominant hand, or the ring finger of that hand; today any finger works. Fit matters more than the finger, because a heavy face rolls sideways on a loose band. If the ring clears your knuckle but spins behind it, Ring Sizing Beads keep it upright: $65 for a signet in sterling silver at JewelryRepair.com.

All glossary terms · Repair questions · How online jewelry repair works

Sources