Jewelry repair questions · Engraving & appraisals
Can an engraving be removed from a ring?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Yes, on solid metal. Engraving Removal lists yellow, white and rose gold, sterling silver, platinum and stainless steel, on rings, bracelets, pendants and watch case backs.
- The letters aren't filled in; the surface comes down past their deepest point, then is refinished.
- Thickness is the limit. If an inscription is too deep to remove safely, you see the options before anything is cut.
- New words going in? Book removal as the +$21 option on Ring Engraving, not as a separate job.
- Plated, tungsten or titanium? Not on the removal list, so they start with a free quote or the $19 Mail-In Evaluation.
Prices
| Service | Price | What's included |
|---|---|---|
| Engraving Removal | from $40 | The inscription taken back to clean metal and the area refinished to match, on rings, bracelets, pendants and watch case backs. $50 in 14K white or rose gold, $54 in 18K white or rose ($40 + $8 + $6), $82 in platinum, $70 in stainless steel. Tighten stones +$23, rush +$50. |
| Ring Engraving with removal | from $60 | Old lettering removed and a new inscription machine-cut in script or block. $89 in 14K yellow gold ($60 + $6 + $2 + $21), $134 in platinum ($60 + $53 + $21). |
| Ring Resizing with removal | from $45 | When the ring is being sized anyway. Sizing a 14K yellow gold ring down and clearing the old inscription is $89 ($45 + $13 + $7 + $24). |
| Mail-In Evaluation | $19 | For plated, tungsten, titanium or very thin bands: examined under magnification, photographed and quoted before any work. Credited in full toward the repair. |
Before you erase it
People take inscriptions off a secondhand or inherited ring carrying someone else's initials, a name or date that no longer fits, or to clear the band for new words. Removal can't be undone, so first:
- Photograph it. A close-up keeps a record of the wording.
- Think about identification. Jewelers Mutual points out that an engraving can help prove a ring is yours if it's lost or stolen. If your appraisal describes the inscription, update it afterward; see how often jewelry should be reappraised.
- Consider keeping it. New words can go elsewhere on the band. A typo has its own options in can a worn or misspelled engraving be re-engraved?
- Mind the stamps. Karat stamps and maker's marks often sit inside the band too. The order form asks for the exact inscription and its location, so name only what you want gone. If a stamp is ever lost, Metal Testing & Verification documents the metal for $15.
How a jeweler removes an engraving
An engraving is a groove cut below the surface. A groove can't be filled to match the metal around it, so the surrounding surface is lowered until the bottom of the deepest letter is gone.
- Read the depth. Wikipedia's laser engraving article notes that engraving can reach 100 µm (a tenth of a millimeter) and beyond, while laser marking is typically shallower, sometimes only a change of color.
- Cut down in stages, under magnification, so no ghost of the text survives when the band is tilted to the light.
- Refinish to match. A high polish is blended in invisibly; a brushed or matte surface is rebuilt so the area doesn't read as a shiny patch.
- Check and photograph. At our New York studio the piece is photographed on arrival and before it ships back. A bench jeweler does the work and a second jeweler checks it.
Polishing alone isn't the method: GIA's durability study notes some gold comes off with every polish, which is how shallow lettering softens unevenly over the years. Cutting down first keeps the result level.
Inside, outside, laser or hand-cut: what changes
- Inside the band. The usual spot and the best protected, so lettering there is often close to its original depth. The cleared area sits against your skin, where an even finish matters more than shine.
- Outside the band. Outside lettering rubs against everything all day, so it's often shallower. A textured outside surface has to be rebuilt, not just polished; say so in the order notes.
- Next to stones. Settings limit how close a cutter can work, and the plan is confirmed once the ring is examined. Loose stones can be tightened for +$23.
- Hand engraving. Graver-cut ornament is part of a ring's design; worn hand engraving can instead be re-cut through Hand Engraving, from $250 by free quote. See laser vs machine vs hand engraving.
- Watch case backs. A stainless steel case back is $70 ($40 + $30). If the watch is under the maker's warranty or service plan, check with the maker first, because outside work can void it.
Will it change the ring's size or strength?
Rarely by much. US ring sizes step by 0.81 mm of inside diameter, according to Wikipedia's ring size article. If the whole inside of a band were lowered by 0.1 mm, the inside diameter would grow by 0.2 mm, about a quarter of one size (0.2 ÷ 0.81 = 0.25). Removal clears only the area around the lettering, so the change to fit is usually smaller still.
Strength matters only on a thin band, usually worn at the bottom after years of daily wear. That's why the depth of the lettering is judged against the metal left before any cutting. If you're resizing too, book the removal on Ring Resizing (+$24) so both are planned together; see can an engraved ring be resized?
When it can't be done, and the alternatives
- Too deep for the metal left. Keep the inscription, put new wording elsewhere, or, on a band worn thin anyway, rebuild it with Shank Repair: a half shank replaces the lower band, lettering and all, for $307 in 14K yellow gold ($45 + $7 + $5 + $250).
- Gold-plated and vermeil. The FTC's guides require vermeil to carry at least 2.5 microns of gold, a fortieth of a 100 µm engraving (100 ÷ 2.5 = 40), so any cut deep enough to clear lettering goes through it. Start with a free quote through the contact page; re-plating is Gold Plating, from $60.
- Tungsten carbide and titanium. Ring Engraving lists both for new inscriptions, but Engraving Removal doesn't, so removal starts with a free quote or the $19 evaluation.
- Rhodium-plated white gold. Cutting the surface takes the rhodium off that spot. To brighten the whole ring, Rhodium Plating for 14K white gold is $79 ($69 + $8 + $2).
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee.
- Removal only: $40 in sterling silver; $46 in 10K yellow gold; $48 in 14K yellow ($40 + $6 + $2); $52 in 18K yellow; $50 in 14K white or rose ($40 + $8 + $2); $54 in 18K white or rose; $82 in platinum ($40 + $42); $70 in stainless steel ($40 + $30).
- Removal plus a new inscription: Ring Engraving with Remove existing engraving is $81 in silver ($60 + $21) rather than $100 booked separately ($40 + $60); $89 in 14K yellow gold ($60 + $6 + $2 + $21); $134 in platinum ($60 + $53 + $21).
- Removal during a resize: sizing a 14K yellow gold ring down and clearing the old inscription is $89 ($45 + $13 + $7 + $24).
- Rush: +$50 ships it back 2 to 3 days sooner.
Shipping is $30 round trip per order by UPS, with the prepaid label ready in your account after checkout; drop the plain, sturdy box at any UPS location. $100 of coverage is included each way, and full value up to $10,000 costs 2.5% of the value above $100 for both directions: $35 for a $1,500 ring (2.5% of $1,400). A signature is required at both ends. The work happens at Sky Jewelry's New York studio, where the family has been jewelers on Lenox Avenue since 1989 and has completed over 50,000 repairs since 1989.
Questions
How much does it cost to remove engraving from a ring?
Does removing an engraving make a ring thinner or a different size?
Can laser engraving be removed from a ring?
Can I remove an engraving myself?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list