Bench techniques
Engraving
Engraving is cutting letters or a design into metal, so the mark is a groove rather than something printed on the surface. Jewelers cut it with a diamond-tipped machine stylus or by hand with a steel graver, and lasers can also engrave metal. It is how rings, pendants and watch case backs carry names, dates and messages.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How engraving is done
All engraving removes metal. What changes is the tool, and the tool decides how the lettering looks.
- Machine engraving. A diamond stylus is guided through the metal at an even depth and spacing. You type the inscription and choose script or block lettering. This is how Ring Engraving, Necklace & Pendant Engraving and Watch & Bracelet Engraving are cut at the New York studio.
- Hand engraving. An engraver pushes a hardened steel graver, also called a burin, through the metal one stroke at a time. Depth and angle change within each stroke, so the line swells and tapers like pen calligraphy: the look of antique signet rings and lockets. Hand Engraving is priced by free quote, from $250.
- Laser engraving. A focused laser removes metal to form the design. Laser marking is a wider set of methods, such as changing the surface color or melting or charring it, and the two terms are often mixed up because the same machines can do both. An existing laser engraving can be removed before hand engraving (+$21 on the Hand Engraving page).
Under a loupe the difference usually shows: a hand-cut line swells and narrows along its length, while a machine-cut line keeps an even width and depth.
Why it matters for repairs: how engraving wears
An inscription is only as deep as the day it was cut, and every polish takes a little metal off the surface around it. Engraving on the outside of a ring meets door handles, railings and neighboring rings all day, so it softens much faster than an inscription inside the band. Shallow marks fade first. Machine engraving here is cut deep enough to stay readable through years of polish and wear, and shallow enough to leave the band's strength alone.
- Resizing. A ring is sized by cutting the shank at the bottom and adding or removing metal there. An inscription that runs across the bottom of the band can be interrupted by the new seam, so mention it when you book Ring Resizing, which also lists removing an existing engraving as an add-on (+$24).
- Polishing and re-plating. Both refinish the surface, so a heavily worn inscription gets shallower each time.
- Worn antique engraving. Faded hand engraving can be re-cut by hand through Hand Engraving rather than replaced with machine lettering.
Planning an inscription
- Inside or outside. Ring Engraving cuts either surface, tungsten and titanium bands included. Inside stays private and wears slowly; outside is decorative and wears faster.
- Fit. A narrow band or a small pendant holds fewer letters at a readable height. You type the inscription at checkout, and if it won't fit legibly, the jeweler contacts you before cutting.
- Script or block. Both are included. A custom image or font, such as a signature or a drawing, adds $50.
- Curves and case backs. Watch case backs are rarely perfect circles, and lockets and dog tags curve, so the layout is set to the engravable area of your actual piece, not a template.
Engraving vs etching
Both leave a recessed mark, but they get there differently. Engraving cuts the groove mechanically, with a graver or a diamond stylus. Etching uses acid to eat into metal left exposed through a protective coating; historically it was the easier technique to learn, because it doesn't demand the metal-cutting skill a graver does. On jewelry, "etched" is also used loosely for laser marks, so if depth and lasting legibility matter to you, ask how an inscription will actually be made.
What it costs here
- Ring Engraving: $60 in sterling silver; $68 in 14K yellow gold ($60 + $6 + $2); $70 in 14K white or rose gold ($60 + $8 + $2); $113 in platinum ($60 + $53).
- Necklace & Pendant Engraving: the same metal prices, from $60 in silver.
- Watch & Bracelet Engraving: $35 for a silver bracelet; a stainless steel watch case back is $85 ($35 + $35 for a watch + $15 for stainless).
- Engraving Removal: from $40 in silver; $70 on stainless steel ($40 + $30).
- Hand Engraving: from $250 by free quote; ornamental work adds $50.
Each price includes a clean and polish and the 1-year workmanship guarantee, and shipping is $30 round trip by UPS per order. Inscriptions are laid out and cut at the New York studio of Sky Jewelry, which runs JewelryRepair.com and has done over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Ring Engraving | from $60 | Machine engraving inside or outside the band, script or block, including tungsten and titanium. Custom image or font +$50. |
| Necklace & Pendant Engraving | from $60 | Pendants, bar necklaces, dog tags and lockets, laid out to the piece's real engravable area. |
| Watch & Bracelet Engraving | from $35 | Machine engraving on case backs, bracelet clasps and bangle interiors. A watch adds $35; stainless steel adds $15. |
| Hand Engraving | from $250 | Graver-cut lettering or ornament, and re-cutting worn antique engraving. Ornamental work +$50. |
| Engraving Removal | from $40 | Inscription removed and the surface refinished to match. If it's too deep to remove safely, you see the options first. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
How much does it cost to engrave a ring?
Can you engrave the inside of a ring?
What is the difference between hand engraving and machine engraving?
Can engraving be removed from jewelry?
Will resizing a ring ruin the engraving?
How long does engraving last?
See also
All glossary terms · Repair questions · How online jewelry repair works