Jewelry repair questions · Rings & sizing

Resized ring still too small or too big? What to do

Wear it a few days first, since fingers swell and shrink with temperature, then have the ring's size checked. If JewelryRepair.com resized it and it's off the ordered size or has shifted, the 1-year workmanship guarantee covers the redo. If it's the size you chose, resize again from $45 or add sizing beads from $40.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

0.81 mmdifference in inside diameter between whole US ring sizes
$40Ring Sizing Beads in silver, about half a size of grip
1 yearworkmanship guarantee from delivery; covers a resize that shifts
50,000+repairs since 1989 by family jewelers on Lenox Avenue

The short version

  • Wear it for a few days, at different times of day, before deciding.
  • Check the ring, not just the feel (how, below).
  • Off the size you ordered, or shifted after a resize here: send a guarantee claim.
  • The size you ordered, but wrong for your finger: measure again properly, then a second resize or sizing beads at the regular price.
  • Tight over the knuckle but loose behind it: no single size fits both, so beads are the usual answer, not another cut.

Prices

Service PriceWhat's included
Ring Resizing from $45Shank cut, metal removed or matched sizing stock added, joined, trued round and polished; stones checked. +$35 per full size up beyond the first. 14K yellow gold: $65 down, $70 up one size.
Ring Sizing Beads from $40Two beads soldered inside the band at about four and eight o'clock; 2mm beads take up about half a size, 3mm beads +$45, a sizing bar +$200. Removable later. 14K yellow gold: $62.
Ring Reshaping from $53A ring that's out of round worked back to round on a steel mandrel, checked for cracks and polished; sizing after the reshape +$40.
Mail-In Evaluation $19Not sure whether it's the ring or the measurement: the whole ring examined under magnification, with an itemized quote and photos.

Why a correctly resized ring can still feel wrong

Often the ring is exactly the size ordered, and the finger or the measurement is what moved. GIA's guide to ring size lists the usual culprits:

  • Temperature and time of day. Fingers shrink in the cold and swell in the heat, and a measurement taken on a cool morning can differ from one taken in the afternoon.
  • The other hand. For a right-handed person, the left ring finger is typically about half a size smaller than the right.
  • Band width. Rings with wide shanks fit more snugly and usually need to be a bit larger.
  • The knuckle. For most people the joint is larger than the base of the finger. A ring sized to the base may not pass the knuckle; one sized to pass it may spin.
  • The measuring method. String can stretch, and paper can shrink and curl.

Pregnancy, weight change and arthritis move ring size too. See resizing after pregnancy or weight loss and ring options for arthritis or large knuckles.

Was it the ring or the measurement? How to check

  • Read the ring's size. Any jeweler can check it on a steel ring mandrel. At home, measure the inside diameter: in the US scale, whole sizes differ by 0.81 mm (0.032 inches), so a size 6 is 16.51 mm across inside and a size 7 is 17.32 mm.
  • Check that it's round. Look straight through the ring against a light. An oval ring feels tight and loose at once.
  • Look at the bottom of the band for a pit or hairline crack where it was joined.
  • Measure your finger again, properly. On the finger you'll wear it on, at the end of the day; our answer on finding your ring size at home walks through it.

If the ring matches the size you ordered and is round, the resize did what was asked, and the fix is a new size. If it doesn't, or the joint has moved, send a guarantee claim.

What the 1-year guarantee covers, and what it doesn't

If JewelryRepair.com resized the ring, the workmanship guarantee runs for one year from the day the ring was delivered back to you, not from the order date. It covers the work performed, the materials added and any damage the work directly caused, and the guarantee terms name a resize that shifts as an example. Covered work is redone at no charge, or refunded if a redo isn't possible.

  • Not covered, in the terms' own words: new damage after delivery, such as a dropped ring; normal wear on parts not worked on; plating wear beyond the premature-wear standard; and conditions you asked to leave as they were.
  • What that means for fit: the guarantee covers our work, so a ring resized to the size you ordered is working as asked, and work by another jeweler isn't ours to guarantee. If you think the ring doesn't match the size on your order, send a claim and a jeweler will check.
  • How to claim: send the order number and a photo through the contact page or by replying to any order email. A jeweler reviews it, usually within 1 business day, and confirms coverage before anything ships. Approved claims get a prepaid label.

Full terms are on the guarantee page. If the ring is still under a maker's or store's warranty, see does resizing a ring void the warranty before having anyone else work on it.

The fixes, in brief

Every option is compared in Ring too small or too big?, including ring guards. After a resize that missed, the choice usually comes down to this:

  • A little loose, or loose behind a big knuckle: Ring Sizing Beads, which Jewelers Mutual calls a cost-effective option for about half a size smaller. Jewelers Mutual also warns against tape, liquid guard or food-grade silicone, which can damage a ring.
  • Off by a size or more, either way: Ring Resizing again; the jeweler cuts at the bottom of the shank, where the earlier joint is.
  • Out of round: Ring Reshaping, with sizing added if it's needed.

A second resize is routine. Jewelers Mutual cautions that going more than two sizes either way may distort the band or weaken the setting; see how many times a ring can be resized.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026:

  • Size down: $45 in sterling silver, $65 in 14K yellow gold ($45 + $13 + $7), $76 in 14K white gold ($45 + $24 + $7).
  • Size up: $50 in silver and $70 in 14K yellow gold for the first size ($45 + $5 + $13 + $7), plus $35 for each further full size.
  • Sizing beads: $40 in silver, $62 in 14K yellow gold ($40 + $17 + $5), $67 in 14K white gold ($40 + $22 + $5); 3mm beads +$45, a sizing bar +$200.
  • Reshaping: $53 in silver, $93 with sizing after the reshape ($53 + $40).
  • Bands 4mm and wider add $46 to a resize.

Every price includes a clean and polish and the 1-year workmanship guarantee. Shipping is $30 round trip per order by UPS, with $100 of coverage each way. JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989.

Getting the size right the second time

  • Measure more than once, over a few days, with a sizer about as wide as your band.
  • Test the knuckle. The size you pick should go over it with a little resistance and come off with a twist; see how a ring should fit.
  • Put both sizes in the order: the ring's current size and the size you want. Not sure of the size you need? Measure again before you order; the jeweler reads the ring's current size on arrival and contacts you if it doesn't match what you entered, before any work.
  • What happens at the bench: at our New York studio the ring is photographed on arrival and before it ships, a second jeweler checks the work, and it comes back by UPS with a signature required.

Questions

Can a ring be resized again if it's still too small?
Yes. A ring that's still too small can be sized up again as long as the band has enough metal; the jeweler cuts at the bottom of the shank, where the earlier joint is. At JewelryRepair.com, sizing up starts at $50 in sterling silver and $70 in 14K yellow gold for the first size, with $35 for each further full size. Measure carefully first, so the second resize is the last one.
Will the jeweler resize my ring again for free?
Only if the work was at fault. At JewelryRepair.com, the 1-year workmanship guarantee covers the work performed, and its terms name a resize that shifts; covered work is redone at no charge once a jeweler confirms the claim. If you think the ring isn't the size on your order, send a claim. If it's the size you chose and your finger needs another, the second resize is charged at the regular price.
My resized ring spins on my finger. What should I do?
If it's loose at the base but only just passes your knuckle, don't size it down further: a smaller ring may not go on. Add sizing beads instead. Two small beads soldered inside the band grip the finger and still let it pass the knuckle; at JewelryRepair.com they start at $40 in silver and $62 in 14K yellow gold, and can be removed later.
How can I tell if my ring was resized to the right size?
Have its size read on a steel ring mandrel, which any jeweler can do, or measure the inside diameter against the US scale: a size 7 is 17.32 mm. Check it's round and look for a crack where it was joined. If JewelryRepair.com resized it, send your order number and a photo; a jeweler reviews it, usually within 1 business day.