Repair questions · Metals, plating & finishing

Are ultrasonic cleaners safe for all jewelry?

No. GIA says diamond is usually durable enough for an ultrasonic but doesn't recommend these machines for home use, and pearls, opals, emeralds, filled stones and heat-sensitive gems like tanzanite should stay out. At JewelryRepair.com, the Jewelry Spa (from $44 by mail) cleans pearls, opals and other fragile stones by hand.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$44Jewelry Spa: ultrasonic, steam, hand polish and a written inspection
$199The Anniversary Service: a yearly clean, inspection and tightening for an engagement ring
$30round-trip UPS shipping per order, however many pieces are in the box
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Usually fine: untreated diamonds in sound settings, and plain gold, platinum or sterling silver with no stones.
  • Keep out: pearls and other organic gems, opal, emerald, any filled, oiled or coated stone, and heat-sensitive stones such as tanzanite, moonstone and turquoise.
  • Check first: anything with a loose stone, heat-treated stones, stones set edge to edge, a deliberately darkened finish, plated or costume pieces, or a stone you can't identify.
  • Mixed pieces: a piece is only as tough as its most fragile part. A gold ring with one opal is an opal ring as far as the cleaner is concerned.

Prices

Service PriceWhat's included
Jewelry Spa from $44Ultrasonic, steam and hand polish, then a written inspection report. Pearls and opals are cleaned by hand. Bracelet or necklace +$12.
The Anniversary Service $199Yearly engagement-ring clean, magnified inspection, loose-stone tightening, re-rhodium on white gold, condition photos.
Stone Tightening from $50Loose stones tightened under 10x magnification, up to eight stones per order.
Reset Loose Stone $89One shifted or fallen-out stone, re-seated and set level.
Mail-In Evaluation $19For a stone that looks different after a clean: itemized quote with photos, credited in full toward approved work.

Why the vibration matters, and what GIA keeps out of the tank

An ultrasonic cleaner sends high-frequency sound waves through water or a cleaning solution. GIA explains that the waves create heat and pressure, which is what lifts dirt from behind stones and other places a brush can't reach. The same energy also finds weak points, which is why GIA's guidance on these machines names groups to keep out:

  • Organic gems. Pearls, coral, amber, jet, ivory, tortoise shell and shell cameos are porous and can be harmed by the heat and the cleaning chemicals.
  • Filled or impregnated stones. Diamonds can have surface-reaching breaks filled with a glass-like substance, and emerald fillings are oil, resin or wax. These fillings aren't permanent: GIA shows a fracture-filled diamond damaged after too long in a cleaner. Stones impregnated or coated with oil, plastic or wax, including emerald, lapis lazuli, malachite and opal, stay out too (more in how to clean an emerald ring).
  • Heat-sensitive stones, treated or not. Tanzanite, sunstone, moonstone, fluorite, iolite, kunzite, lapis lazuli, malachite, opal, topaz, turquoise and zircon are on GIA's list.
  • Heat-treated gems. GIA says to avoid ultrasonic cleaners for gems treated by heat, to take care with any transparent ruby or sapphire, and never to put star rubies or star sapphires in.

Settings and finishes: the risks people miss

  • Loose stones. GIA's diamond care guide warns that ultrasonic and steam cleaners can loosen gemstones in their settings, which is why jewelry professionals check for loose stones before using them. At home, a stone already held by a worn prong can end up at the bottom of the tank.
  • Stones that touch. GIA warns that vibration can damage stones set with their girdles touching. Invisible settings, where stones sit edge to edge, are built that way.
  • Deliberately darkened pieces. A bath or a silver dip can lift a finish that was darkened on purpose. If a silver design is oxidized on purpose, keep it out of the tank, and when you send it in, say which dark areas should stay.
  • Plated, vermeil and costume pieces. GIA's ultrasonic guidance doesn't cover them. Plating is a thin layer over another metal and costume stones are often glued rather than set, so check with the maker before using a machine; see how to clean gold-plated jewelry and how to clean costume jewelry.
  • Stones you can't identify. Treatments don't show to the eye. GIA's advice is to know whether a gem has been treated before cleaning it; a GIA report lists detectable treatments. If you don't know, treat the stone as fragile.

If you use one at home

GIA's diamond care guide doesn't recommend ultrasonic or steam cleaners for home use. If you own one anyway:

  • Clean only pieces you've identified: untreated diamonds and plain metal, nothing from the keep-out list.
  • Before each clean, press each stone gently with a fingernail and tap the piece near your ear. A stone that moves, or a faint rattle, means a jeweler, not the tank.
  • Follow the machine maker's instructions for solution and time. GIA's example of a damaged filled diamond came from a stone left in too long.
  • Check every stone again afterward, and rinse over a closed drain.

For anything fragile, GIA's safest method is warm water with a few drops of mild dish soap and a soft toothbrush kept for jewelry, which it calls safe for most gemstones. Keep pearls and porous stones like turquoise and coral away from chemicals altogether. More in the safest ways to clean jewelry at home.

How a jeweler does it

The Jewelry Spa at JewelryRepair.com runs in a set order. The ultrasonic bath loosens oils, lotion and debris packed under stones and inside gallery work. A pressurized steam jet blows the loosened residue out of the recesses. The piece is hand-polished, and then a jeweler examines it under magnification and writes up stone tightness, prong wear, clasp integrity and thinning shanks. Pearls and opals skip the ultrasonic and are cleaned by hand.

The inspection is what a home machine can't do: a loose stone turns up in a report, not in the rinse water. Every repair here includes a clean and polish too. The bench belongs to Sky Jewelry, family jewelers on Lenox Avenue in New York with over 50,000 repairs since 1989; one jeweler does the work and a second checks it.

What it costs at JewelryRepair.com

  • Jewelry Spa: $44 for a sterling silver ring, earrings or pendant. A 14K yellow gold ring is $59 ($44 + $10 yellow gold + $5 for 14K) and a 14K white gold ring $68 ($44 + $19 + $5). A bracelet or necklace adds $12, so an 18K yellow gold necklace is $78 ($44 + $12 + $10 + $12).
  • A stone moved or fell out: Stone Tightening from $50, or Reset Loose Stone, $89 flat, for one stone that has shifted or come out. Seal a loose stone in a small bag in the package.
  • An emerald, opal or pearl looks cloudy or dull after a clean: that doesn't map to one listed repair, so it starts with the Mail-In Evaluation, $19 and credited in full, with an itemized quote and photos before any work.

Shipping is $30 round trip by UPS per order: the prepaid label is in your account after checkout, $100 of coverage is included each way, and the piece is photographed on arrival and before it ships back.

Questions

Can you put sterling silver in an ultrasonic cleaner?
Plain sterling silver with no stones usually can: GIA's cautions are about gems, treatments, settings and finishes rather than solid metal. The exceptions are silver set with pearls, opal, turquoise or other fragile stones, and silver darkened on purpose, where a bath or dip can lift the dark finish you want to keep. For silver that has lost its shine, Jewelry Polishing starts at $30 for a ring.
Is an ultrasonic jewelry cleaner worth it for home use?
For most people, no: GIA's diamond care guide lists ultrasonic and steam cleaners among the harsher methods it does not recommend for home use. A machine does lift grime from behind diamonds and from plain gold or platinum, but it can't tell you a prong is worn, and it can shake a loose stone free. Warm water, mild dish soap and a soft brush are safe for most gems; the Jewelry Spa, from $44, adds a magnified inspection.
Is it safe to put a diamond engagement ring in an ultrasonic cleaner?
Usually, if the diamond is untreated and every stone is tight. GIA says diamond is usually durable enough for an ultrasonic, but it advises hand cleaning for heavily included or treated diamonds and warns that the vibration can loosen stones, so check the prongs first. The Anniversary Service, $199 a year, pairs a deep clean with a magnified inspection and includes loose-stone tightening.
Can an ultrasonic cleaner loosen stones?
Yes. GIA's diamond care guide says ultrasonic and steam cleaners can loosen gemstones in their settings, and that jewelry professionals check for loose stones before using them. The stones most at risk are the ones already held by a worn prong or already moving. If a stone shifts after a clean, Stone Tightening starts at $50, and Reset Loose Stone is $89 for one stone.
Can pearls or opals go in an ultrasonic cleaner?
No. GIA lists pearls among the organic gems that should never be cleaned ultrasonically, and opal is on both its heat-sensitive list and its list of stones often impregnated with oil, plastic or wax. For both, GIA's safest method is warm water with a few drops of mild dish soap and a soft brush. In our Jewelry Spa, pearls and opals skip the ultrasonic and are cleaned by hand.
Is a steam cleaner safer than an ultrasonic?
Not for fragile stones. GIA's diamond care guide groups steam with ultrasonic cleaners as harsher methods it doesn't recommend for home use, and says both can loosen stones. Steam is hot, so the heat-sensitive stones on GIA's ultrasonic list deserve the same caution. A jeweler uses the two together: the ultrasonic to loosen grime, steam to blow it out, then an inspection under magnification.