Jewelry repair questions · Metals, plating & finishing

What is the safest way to clean jewelry at home?

Soak the piece briefly in warm, not hot, water with a few drops of mild dish soap, brush gently with a soft toothbrush, rinse in a bowl of clean water and dry with a lint-free cloth. Skip toothpaste, abrasive powders and bleach, and treat pearls and soft stones more gently. A professional clean and inspection at JewelryRepair.com starts at $44.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$44Jewelry Spa: clean, polish and written inspection, from
$30Jewelry Polishing for a ring, from
$199The Anniversary Service, yearly engagement-ring care
50,000+repairs since 1989

The safe method, step by step

  • 1. Work over a bowl, not the drain. GIA's advice is to clean away from an open drain, or cover it, so a stone or an earring can't disappear.
  • 2. Mix the bath. Warm, not hot, water with a few drops of mild dish soap. Jewelers Mutual recommends the same and warns against soaps with unknown ingredients; GIA calls it the safest choice for gold set with delicate or porous stones or pearls.
  • 3. Soak only what can take it. Plain gold, platinum and diamond pieces can sit for a few minutes to soften lotion and soap buildup behind the stones. Pieces with pearls, solid opals, emeralds or other delicate stones get a quick dip, not a soak, and assembled opals get no dip at all (see below).
  • 4. Brush gently. Use a soft toothbrush reserved for jewelry and work under the stones and around the prongs. Don't pry or scrub: GIA warns against loosening stones, especially in older settings.
  • 5. Rinse in clean water. Use lukewarm water in a second bowl, so soap doesn't dry into the setting.
  • 6. Dry completely. Pat with a soft, lint-free cloth and let it air dry. For strung pearls, GIA says the string should be completely dry before you wear them, and the same goes for any knotted bead strand.

Prices

Service PriceWhat's included
Jewelry Spa from $44Ultrasonic bath, steam and hand polish, with a written inspection report from the bench. Bracelet or necklace +$12; gold adds $10 to $19 plus the karat charge.
Jewelry Polishing from $30For the scratches a clean can't lift: worked through finer and finer compounds to a mirror, satin or brushed finish.
The Anniversary Service $199Yearly engagement-ring care: deep clean, magnified inspection, loose stones tightened, white gold re-plated with rhodium, condition photos.
Stone Tightening from $50Loose stones you notice while cleaning, tightened under 10x magnification, up to eight stones per order.
Rhodium Plating from $69White gold that looks yellowish after cleaning: polished, cleaned and re-plated so it's bright white again.

Adjust for what it's made of

  • Gold, platinum and diamonds: the method above, as often as you like. Diamonds shrug off most chemicals, but GIA warns that sudden, extreme temperature changes can cause thermal shock, so don't move a ring from hot water straight into cold. For a plain diamond piece GIA also notes a mild ammonia solution is safe for most pieces, unless the diamond is coated.
  • Rubies and sapphires: soap and water is fine; GIA keeps star rubies and star sapphires out of ultrasonic cleaners.
  • Emeralds and opals: a quick dip and a soft cloth. GIA notes both can be impregnated with oil, plastic or wax, and that fillings like these aren't permanent. Opal doublets and triplets (a thin opal layer glued to a backing) should never be dipped, because water can dissolve the glue: wipe them with a damp cloth and dry at once, and if you don't know whether an opal is solid, treat it as assembled. More in how to clean an emerald ring.
  • Pearls: GIA's routine is a soft-cloth wipe every time you take them off, and it warns that acids, hair spray, perfume and makeup can damage pearls. See how to clean real pearls.
  • Sterling silver: soap removes dirt but not tarnish; see how to clean tarnished sterling silver.
  • Gold-plated, vermeil and costume pieces: soap and water, briefly, then dry at once; polishing cloths and pastes wear through the thin layer. See how to clean gold-plated jewelry.
  • Any other stone: Jewelers Mutual's advice is to ask a jeweler about the safest method for any stone other than diamond.

The best homemade jewelry cleaner, and the household mixes to skip

The best homemade jewelry cleaner is the plain soap bath above. Everything else in the kitchen cupboard has a catch:

  • Vinegar and lemon juice: both are acids, and GIA says pearls are damaged by all acids; keep them off pearls and porous stones too.
  • Baking soda paste and toothpaste: both are gritty. GIA advises against abrasives like those in toothpaste and some metal polishes, and lists powdered abrasive household cleansers among methods not recommended for home use; they leave fine scratches and remove plating.
  • Chlorine bleach and chlorinated water: GIA warns that chlorine and other bleaching agents can damage some gemstones and metal alloys, and Jewelers Mutual adds that chlorine, especially at hot-tub temperatures, can permanently damage or discolor gold. Take rings off for bleach, pools and hot tubs.
  • Window cleaner and other ammonia products: fine for a plain diamond piece, but keep them away from pearls and porous or organic gems.
  • Home ultrasonic and steam cleaners: GIA doesn't recommend them for home use because they can loosen stones; see are ultrasonic cleaners safe for jewelry?
  • Hot water: warm is enough; GIA warns that high heat can burn or crack pearls.

For what vinegar, baking soda and hydrogen peroxide do to each metal and stone, see cleaning jewelry with vinegar, baking soda or peroxide.

Inspect it while it's clean

A clean piece is the easiest to check:

  • Hold a ring near your ear and tap it gently. A faint rattle means a loose stone.
  • Look at each prong tip. A prong that has worn flat, lifted, or catches on the cloth needs attention; a stone that moves in its setting slowly grinds down the metal holding it, GIA explains.
  • Run chains and bracelets through your fingers for stiff, kinked or stretched links, and open and close the clasp a few times.
  • On a pearl strand, look for gaps between pearls or a frayed cord.
  • On white gold, a yellowish tint means the rhodium plating is wearing through, not that the gold is dirty.

Anything you find is cheaper to fix now: Stone Tightening starts at $50, Prong Re-Tipping at $29 for up to four prongs in silver, and Pearl Restringing at $15 plus $4 per inch. Not sure what you're seeing? The Mail-In Evaluation ($19, credited in full) gets the whole piece examined under magnification and quoted with photos.

When a professional clean is worth it

Home cleaning lifts surface grime, but it doesn't reach residue compacted under a stone, remove scratches or tell you whether the prongs are sound.

  • Jewelry Spa: an ultrasonic bath to loosen the oils and debris packed under stones, a pressurized steam jet to clear them out, a hand polish, and a written inspection report. $44 for a silver ring, earrings or pendant; a 14K yellow gold ring is $59 ($44 + $10 + $5), and a 14K white gold necklace is $80 ($44 + $12 + $19 + $5). Because it uses an ultrasonic bath and steam, it's for metal, diamonds and durable stones; list any colored stones in your order notes. For pearls, opals, emeralds or treated stones, ask for a free quote or book the $19 Mail-In Evaluation (credited in full) first.
  • Jewelry Polishing: from $30 for a ring, and $55 for a 14K yellow gold ring ($30 + $17 + $8), for the hairline scratches that make metal look dull.
  • The Anniversary Service: $199 a year for an engagement ring: deep clean, magnified inspection, loose stones tightened as part of the service, white gold re-plated with rhodium, and condition photos.

More on pricing in professional jewelry cleaning and polishing cost. A clean and polish is already included in every repair at JewelryRepair.com, the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989, so if a piece needs a repair anyway, it comes back clean.

Questions

Is toothpaste safe for cleaning rings?
No. Its grit leaves fine scratches that dull gold and silver, can wear through plating, and the paste lodges around the stones where it's hard to rinse out. If a ring has already been scrubbed with toothpaste and looks hazy, a professional polish removes the hairline scratches: Jewelry Polishing at JewelryRepair.com starts at $30 for a ring.
How do I clean jewelry that has turned black or brown?
Black or brown discoloration is usually tarnish, which soap won't remove. On sterling silver, a silver polishing cloth handles light tarnish, and heavier tarnish needs a silver polish or a professional clean. On plated pieces, dark patches often mean the plating has worn through, and only re-plating restores the color: Gold Plating is from $60 on silver ($173 on brass, $240 on copper), and Rhodium Plating on a plated ring is $74. Unsure of the base metal? Start with the $19 Mail-In Evaluation.
How often should I clean my jewelry?
Clean everyday rings at home whenever a coating of lotion or soap dulls them, wipe pearls with a soft cloth after every wearing (GIA's advice), and have a ring you wear daily checked by a jeweler from time to time. A gentle soap-and-water clean is safe to repeat as often as needed. For an engagement ring, The Anniversary Service at JewelryRepair.com, $199, is a once-a-year deep clean, magnified inspection and stone tightening.
How do I clean a tungsten ring?
Use the same soap-and-water method as for gold; tungsten needs nothing special. Skip silver polish and dips, which are made for silver, and skip bleach and abrasive cleaners. If the ring has an inlay of wood, stone or another material, keep the soak short and dry it right away so water doesn't sit in the inlay.