Jewelry repair questions · Metals, plating & finishing
How do you clean gold-plated jewelry without rubbing off the gold?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Know what you have. GEP and HGE mean electroplated, and GP usually does; a gold-colored piece stamped 925 or sold as vermeil is gold over sterling silver; GF or a fraction such as 1/20 14K GF means gold filled. 14K or 585 on its own means solid gold, which can take more.
- Clean gently: warm water, a few drops of mild dish soap, a soft brush, a rinse and a thorough dry.
- Don't use baking soda, vinegar, hydrogen peroxide, hot water, toothpaste, bleach, chlorine or abrasive metal polish.
- Polishing cloths: only one sold for gold, with light pressure, and only now and then.
- Dark or coppery spots that don't wash off are base metal showing through. Cleaning can't fix that; re-plating can.
Prices
| Service | Price | What's included |
|---|---|---|
| Gold Plating | $60 ring or pendant on silver, flash | The fix once the gold has worn through: polished to a clean, bright surface, cleaned ultrasonically and with steam, activated, then plated in yellow, rose or white gold at the thickness you choose. Earrings add $25, a necklace $50; brass bases add $113. |
| Metal Testing & Verification | $15 | Tells you whether a piece is gold plated, vermeil, gold filled or solid gold, which decides how hard it can be cleaned: stamps checked under magnification, metal tested and documented. |
| Mail-In Evaluation | $19 | For a plated piece that needs a professional polish, which is quoted first, or any repair you're unsure about: a jeweler examines it and sends an itemized quote with photos. |
The details: why plating needs gentler care than solid gold
How hard you can clean a piece depends on how much gold is there, and on electroplate it is very little. The FTC's jewelry guides set the floor for gold electroplate at 0.175 microns of fine gold, a small fraction of a hair's width, while vermeil and heavy gold electroplate start at 2.5 microns, about 14 times as much (2.5 ÷ 0.175 = 14.3). Gold filled is a different construction: a karat-gold layer bonded mechanically that makes up at least 1/20 of the metal's weight, against usually under 0.05% gold by weight for plated pieces, according to jewelry supplier Cookson Gold.
Anything abrasive removes metal, and on a layer measured in fractions of a micron there isn't much to remove. Discoloration on plating also isn't always dirt. Jewelers Mutual explains that once the base metal is exposed it reacts with oxygen and other elements, and that the tarnish can look green, brown, gray or black depending on that metal: sterling under vermeil darkens, while brass or copper goes brown or green.
Step by step: the safe home clean
- 1. Mix the bath. A small bowl of warm water with a few drops of mild dish soap. Jewelers Mutual lists hot water among the home methods that can damage gold plating, so keep it warm, not hot.
- 2. Soak briefly. A few minutes is enough. Pieces with pearls or opals shouldn't go in at all: Jewelers Mutual says pearls and porous stones such as opals should never be submerged, so wipe them with a damp, lint-free cloth instead.
- 3. Brush gently. A soft-bristled brush lifts lotion and skin oil from chain links, clasp springs and the backs of settings, where grime collects.
- 4. Rinse. Clean water, so no soap residue dries on the surface.
- 5. Dry completely. Pat it with a soft, lint-free cloth, then let chains and hollow pieces air out; moisture trapped in a clasp speeds tarnish on any exposed base metal.
- 6. Shine, if needed. A gold polishing cloth used in light circles brings back luster. Jewelers Mutual describes these cloths as mildly abrasive, so use one occasionally, not daily.
Between cleans, wipe pieces with a soft dry cloth after each wear. Jewelers Mutual suggests cleaning pieces you wear often every week or two and before you put them away.
How to clean vermeil and gold-filled jewelry
Vermeil is gold over sterling silver, so its problems start where the gold thins: the silver underneath tarnishes and shows as gray or black spots, usually at rub points. Resist reaching for silver polish or silver dip. The Canadian Conservation Institute warns that polishes damage gilding and that silver should touch dips as little as possible to avoid pitting, and a gold-colored piece with silver patches will only look patchier. Clean vermeil the same gentle way and store it alone, where harder pieces can't scratch it.
Gold filled has far more gold on the surface, so the same gentle routine works, with a gold polishing cloth used lightly and only now and then. It still dislikes abrasives and chlorine, and its weak points are small parts: the FTC's assay exemptions for gold-filled products cover joints, catches, screws and springs, so a clasp spring can be plain base metal that discolors before the chain does. More in does gold-filled jewelry tarnish?
Rose-gold-plated and gold-plated stainless steel pieces take the same soap-and-water routine. The rose or yellow color lives only in the plating, so once it wears through, the base shows, whether that's silver, brass or gray steel.
What not to use, and why
- Baking soda, toothpaste and scouring powders: abrasive. They buff off the gold along with the grime.
- Vinegar, lemon juice and hydrogen peroxide: Jewelers Mutual names baking soda, vinegar and hydrogen peroxide among the home cleaners that can damage gold plating.
- Bleach, chlorine and household cleaners: Jewelers Mutual says these can break down gold plating and reveal the base metal. Take plated jewelry off to clean the house, swim or use a hot tub.
- Ammonia-based metal polishes: the Canadian Conservation Institute notes that ammonia can dissolve copper, and brass, a copper alloy, is a common base under gold plating.
- Ultrasonic cleaners: Jewelers Mutual reserves the ultrasonic machine for hard gems set in gold or platinum, and says pearls and porous stones such as opals should never be submerged. A plain plated band is lower risk, but soap and water does the job.
When cleaning can't fix it: re-plating at JewelryRepair.com
If the color stays patchy after a gentle clean, the gold is gone at those spots, and Gold Plating is the fix. The jeweler polishes and cleans the base, activates it so the new gold bonds metal to metal, and plates it in yellow, rose or white gold. On a sterling silver base, flash plating is $60 for a ring or pendant; on brass a ring is $173 ($60 + $113). Flash plating restores the color only. To restore a vermeil-thickness layer of 2.5 microns or more, choose the 2–3 micron option: $385 for a ring on silver ($60 + $325). The full price list by item and base is in how much does gold plating cost?
A plated piece that needs a professional polish is quoted first, because polishing cuts through plating. A broken plated chain can be booked under Chain Soldering's Gold-plated / fashion option, from $47 for one break ($30 + $17); for other solder work on plated pieces, ask for a free, itemized quote through the contact page (a jeweler replies within 1 business day) or book the $19 Mail-In Evaluation, credited in full toward the work you approve. Our 1-year workmanship guarantee covers plating that wears prematurely.
Clean the piece and dry it fully before you pack it, so no soap residue sits on bare spots in transit. JewelryRepair.com, the mail-in service of Sky Jewelry in New York, has done over 50,000 repairs since 1989.
Questions
Can you clean gold-plated jewelry with vinegar or baking soda?
Why did my gold-plated jewelry turn black or green?
Can I use a silver polishing cloth on gold-plated jewelry?
Is an ultrasonic cleaner safe for gold-plated jewelry?
How often should I clean gold-plated jewelry?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list