Metals & plating
Vermeil
Vermeil (say ver-MAY) is gold-plated sterling silver. The FTC's Jewelry Guides reserve the word for a sterling base plated on all significant surfaces with gold of at least 10 karat, equal to at least 2.5 microns of fine gold. That is far thicker than ordinary gold plating, but it is still a layer, and it wears.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What vermeil is
Vermeil is a French word for silver-gilt: silver covered in gold. Gilding silver is ancient: the old fire-gilding method used mercury, was in use by the 4th century BC, and was hard on the health of the gilders who worked with it. Modern vermeil is electroplated. In the US, the FTC's Jewelry Guides set three conditions before a piece is called vermeil:
- A sterling silver base, which under the same guides means at least 925 parts per thousand silver.
- Gold of at least 10 karat on all significant surfaces, of reasonable durability.
- A thickness equal to at least 2.5 microns of fine gold throughout, about 100 millionths of an inch.
Because the minimum is counted in fine (24K) gold, a lower-karat layer has to be physically thicker to qualify. The guides' own example counts 1 micron of 12K gold as half a micron of fine gold, so by the same proportion a 10K layer needs about 6 microns (2.5 × 24 ÷ 10) and an 18K layer about 3.3 (2.5 × 24 ÷ 18).
If a base metal such as nickel sits between the silver and the gold, the guides say that must be disclosed. Gold over brass or copper isn't vermeil at any thickness. A label like "18K gold vermeil" describes the karat of the gold layer, not the piece: underneath, it is sterling silver.
Vermeil vs gold plating
All vermeil is gold plated, but not all gold plating is vermeil. Ordinary "gold electroplate" under the FTC guides needs a layer equal to only 0.175 microns of fine gold, over any base metal, so the vermeil minimum is about 14 times thicker (2.5 ÷ 0.175 = 14.3). The 2.5-micron figure is the same one the guides set for "heavy gold electroplate". A gold-colored piece stamped 925 or Sterling is gold over sterling silver: vermeil if the layer meets the standard, plated sterling if not. For the other gold-layered category, see gold filled; for metal that is gold all the way through, see karat.
How vermeil wears
The gold wears thinnest where the piece rubs: the inside and palm side of a ring, chain links and the clasp, the edges of earrings, the back of a pendant. When it wears through, the sterling silver underneath shows, and exposed silver can tarnish; Does gold vermeil tarnish? covers why. Signs it needs attention:
- A silvery or grayish patch at a rub point.
- Dark spots on the gold, usually silver tarnishing through a thin spot.
- Color change at the clasp or inside a ring before anywhere else.
Polishing doesn't fix worn vermeil. A jeweler's polish works by removing a fine surface layer, so on vermeil it takes gold with it. The answer is re-plating.
Re-plating vermeil here
Gold Plating lays a new layer of real gold over the prepared silver: the jeweler polishes the base to a clean, bright surface, cleans it ultrasonically and with steam, and activates it so the gold bonds to the metal. For a ring or pendant on a sterling silver base, flash plating is $60, 1–2 microns $310 ($60 + $250), 2–3 microns $385 ($60 + $325) and 3–4 microns $460 ($60 + $400). Flash restores the color with the thinnest layer, so on a piece worn every day it wears through soonest; the thicker the layer, the longer it lasts with wear. Earrings add $25, a bracelet $35 and a necklace $50; a rose gold finish adds $52.
Plated pieces that need solder work are quoted first here, so a broken chain, clasp or post on vermeil begins with a free quote, requested through our contact page, or with a $19 Mail-In Evaluation whose fee counts in full toward the work. Vermeil re-plated for JewelryRepair.com is done at Sky Jewelry's New York studio, where the family jewelers on Lenox Avenue since 1989 have completed over 50,000 repairs since 1989; each piece is photographed on arrival and again before it ships back. The 1-year workmanship guarantee covers plating that wears prematurely, and shipping is $30 round trip per order by UPS.
What it costs here
| Service | Price | What's included |
|---|---|---|
| Gold Plating | $60 ring, flash plating | The silver base polished, cleaned ultrasonically and with steam, activated and plated in yellow gold. Flash is the thinnest layer: it restores the color but wears through soonest. |
| Gold Plating | $460 ring, 3–4 microns | $60 + $400 for a far thicker layer than flash; the thickness of a plating decides how long it lasts with wear. |
| Gold Plating | $485 earrings, 3–4 microns | $60 + $25 for earrings + $400. |
| Gold Plating | $510 necklace, 3–4 microns | $60 + $50 for a necklace + $400. |
| Mail-In Evaluation | $19 | For a broken chain, clasp or post on vermeil: examined under magnification and quoted with photos. Credited in full toward the repair. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Is vermeil real gold?
What does 18K gold vermeil mean?
Is vermeil better than gold plated?
Can vermeil be re-plated?
All glossary terms · Repair questions · How online jewelry repair works