Repair questions · Metals, plating & finishing
Does gold-plated jewelry tarnish?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Gold doesn't tarnish. It's one of the least reactive metals and doesn't react with oxygen, so an intact gold layer keeps its color.
- The metal under it does. Plating usually sits on brass, copper or sterling silver. Copper and brass darken to brown or green; silver darkens toward black where it shows through.
- Wear opens the door. Friction, sweat, chlorine and harsh cleaners thin the layer, and tarnish starts at the thin spots. A thicker layer takes longer to wear through.
- The fix is re-plating, not polishing. Polish removes whatever gold is left.
Prices
| Service | Price | What's included |
|---|---|---|
| Gold Plating | from $60 | Polish, ultrasonic and steam cleaning and surface activation, then electroplating in yellow, rose or white gold, from flash plating up to 4+ microns. |
| Rhodium Plating | from $69 | For white or silver-toned plated and fashion pieces: polish, clean and a fresh rhodium layer, $74 for a ring ($69 + $5, 'Gold-plated / fashion' option). Rhodium is white, so yellow gold-plated pieces need Gold Plating instead. |
| Metal Testing & Verification | $15 | Hallmarks checked and the metal tested and documented, so you know whether a piece is plated, gold-filled or solid. |
| Mail-In Evaluation | $19 | A magnified exam and an itemized quote with photos; credited in full toward approved work. |
Why plated jewelry darkens
Gold plating, usually electroplating, lays a thin layer of gold alloy over a less costly metal. Under the FTC's Jewelry Guides, a piece can be called "gold electroplate" only if the layer is at least 10 karat and at least 0.175 microns of fine gold thick, about 7 millionths of an inch; "heavy gold electroplate" needs 2.5 microns. Flash or wash coats can be thinner still, which is why cheap fashion plating is often the thinnest gold of all. So on a tag reading "14K gold plated," the karat describes that thin layer, not the piece.
Gold won't oxidize, so nothing happens while the layer is whole. Jewelers Mutual names copper and brass as the usual base metals, notes that they tarnish more readily than silver, and points out that tarnish beneath a thinning layer can show through even while some gold remains. The first places to go are the ones that rub: the palm side of a ring band, the clasp end of a chain, an earring post, the edges of a bangle.
"Gold-dipped" is usually another name for plating. "Gold-tone" describes a color and promises no gold at all.
Gold-plated vs vermeil, gold-filled and solid gold
- Gold-plated: any base metal under a layer of any thickness: at least 0.175 microns if it's sold as gold electroplate, while flash-plated or gold-washed pieces can carry even less.
- Vermeil: sterling silver plated with gold of at least 10K, at least 2.5 microns thick, under the FTC Guides. When it wears through, the silver beneath tarnishes. See does gold vermeil tarnish.
- Gold-filled: gold bonded on mechanically, making up at least 1/20 of the metal's weight. See does gold-filled jewelry tarnish.
- Solid karat gold: gold all the way through. 14K is 14 parts gold in 24, about 58%, so the alloy metals can dull slightly, but there's no layer to wear through. See does real gold tarnish.
- Gold-colored stainless steel behaves differently again; see does stainless steel jewelry tarnish.
Stamps such as GP, HGE or GF point to gold plate, heavy gold electroplate or gold-filled, but stamps can be wrong or missing. Metal Testing & Verification settles it for $15 per item.
How to tell tarnish from worn-through plating
Wipe an inconspicuous spot, such as the inside of a band, with a clean white cotton cloth. If a gray, brown or greenish residue transfers to the cloth, that's tarnish on the surface. If the off color stays put no matter how you wipe, the gold has worn away there and you're looking at the base metal itself: a whitish, reddish or dull yellow patch where the gold used to be. On a plated piece, tarnish usually means the base metal is already exposed somewhere nearby.
- Green or dark marks on skin usually mean copper or brass is touching it; see why a ring turns a finger green.
- Itchy or red skin is a separate problem from tarnish: the American Academy of Dermatology names earrings and earring backs among the biggest culprits for nickel allergy.
How to slow it down
- Take plated pieces off before swimming, showering, working out and cleaning. Jewelers Mutual flags chlorine, bleach, harsh cleaning agents, sweat and friction.
- Put jewelry on after lotion, perfume and hairspray, not before.
- Clean with warm water, a drop of dish soap and a soft brush, then rinse and dry fully. Skip polishing cloths, dips and abrasive creams.
- Store each piece dry in a soft pouch or lined box so pieces don't rub against each other.
More on care: how to clean gold-plated jewelry and how to keep plated and costume jewelry from tarnishing.
Re-plate or replace? What it costs at JewelryRepair.com
Once the base metal is showing, cleaning can lift the tarnish but can't put gold back. The real fix is Gold Plating: the jeweler polishes and cleans the bare metal first, because plating copies every scratch and trace of oil beneath it, then lays down a new layer. A sterling silver ring or pendant starts at $60 with flash plating; the same ring on a brass base is $173 ($60 + $113). The full price list by item, base metal, color and thickness is in how much gold plating costs.
Thickness is what buys time against tarnish. A flash coat is fine for a piece worn now and then. For a ring or bracelet worn every day, a 1–2 micron layer (+$250) puts a thicker working layer between the base metal and your skin, so the next worn spot takes longer to appear; on a silver ring that's $310 ($60 + $250). How long any layer lasts depends on wear; see how long gold plating lasts.
Re-plate or replace? Re-plating a fashion piece can cost more than it did new, so it makes most sense for something you love or can't replace. Plated pieces that need polishing or solder work are priced by free quote first, since heat and abrasion can cut through plating. For white or silver-toned plated pieces, Rhodium Plating is $74 for a ring ($69 + $5); rhodium is white, so it's not a fix for yellow plating. The 1-year workmanship guarantee covers plating that wears prematurely, not ordinary wear beyond that standard.
Shipping is $30 round trip per order by UPS, with the prepaid label waiting in your account, $100 of coverage each way and a signature on delivery in both directions. Each piece is photographed when it reaches our New York studio and again before it ships back; a bench jeweler does the plating and a second jeweler checks it. Sky Jewelry has been a family jeweler on Lenox Avenue since 1989, and re-plating worn pieces is part of the over 50,000 repairs on its bench.
Questions
Does 14K or 18K gold-plated jewelry tarnish?
Do gold-plated earrings tarnish?
Will a polishing cloth remove tarnish from gold-plated jewelry?
Does gold-plated brass tarnish?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list