Jewelry repair questions · Metals, plating & finishing
How do you keep gold-plated, fashion or costume jewelry from tarnishing?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Two things cause it. Friction and sweat wear the plating thin; then air, moisture, sulfur and chemicals attack the brass, copper or silver underneath. Good habits slow both.
- Last on, first off. On after makeup, lotion, perfume and hairspray; off for showers, swimming, workouts, cleaning and dishes.
- Wipe, then seal. A soft, dry cloth after wearing, then a small zip-top bag or airtight box with an anti-tarnish strip, chalk, activated charcoal or a silica gel packet.
- Coatings are a stopgap. Clear nail polish or lacquer has to be renewed, and it must come off before any re-plating.
- Buying new? Thicker gold lasts longer: heavy gold electroplate, vermeil or gold-filled outlast plain gold plate.
Prices
| Service | Price | What's included |
|---|---|---|
| Gold Plating | from $60 | The base metal polished, cleaned and activated, then plated in yellow, rose or white gold; copper and stainless steel get an underlayer first. Silver ring or pendant $60, brass ring $173 ($60 + $113), copper ring $240 ($60 + $180). Because costume pieces are already plated and their base metals vary, start with the $19 Mail-In Evaluation, credited in full, to confirm the price. |
| Rhodium Plating | from $74 ring from $94 earrings from $114 necklace | For silver-tone fashion pieces gone yellow or dark: polished, cleaned and given a fresh rhodium layer. Earrings $94, a necklace $114. |
| Metal Testing & Verification | $15 | Find out whether a piece is plated, gold-filled, sterling or base metal before you spend money protecting or re-plating it. |
| Mail-In Evaluation | $19 | For pewter, pot metal and unknown alloys, or plated pieces that also need soldering or polishing: examined under magnification, with photos and an itemized quote, credited in full toward approved work. |
Why plated and costume jewelry tarnishes
Gold doesn't react with oxygen at any temperature, so an intact gold layer keeps its color. The trouble is how thin that layer can be and what sits under it. US rules let gold electroplate be extremely thin (the numbers are in can gold plating be removed from silver?), and Wikipedia lists gold- or silver-plated brass among the usual costume jewelry metals, with lower-priced pieces plated over pewter, nickel or other metals.
That gives tarnish two ways in:
- Wear. Jewelers Mutual names friction and sweat from physical activity as what wears gold plating away over time. The contact points go first: the palm side of a ring, a bracelet's underside, the links by a clasp, an earring post.
- Chemistry. Once the base metal shows, it reacts. Jewelers Mutual lists oxygen, sulfur, moisture and humidity in the air, chemicals in makeup, hairspray and perfume, and the oils, sweat and acidity of skin. Brass and copper turn brown or green; silver goes dark.
Every habit below does one of two jobs: it keeps the plating from wearing, or it keeps moisture and chemicals off whatever the plating no longer covers. The background is in does gold-plated jewelry tarnish?
Daily habits that make plating last
- Put it on last. Jewelers Mutual advises taking pieces off before your makeup, hair and skincare routine, so let lotion, perfume and hairspray dry before the jewelry goes on.
- Take it off for water. Remove it before showering, bathing or swimming. Jewelers Mutual warns that water, pool chlorine and ocean salt can rapidly tarnish metals, and that chlorine reacts with the base metal under plating. More in can gold-plated jewelry get wet?
- Take it off for workouts and chores. Jewelers Mutual names sweat from physical activity among what wears plating away, and notes that chemicals in cleaning products can react with the base metal under the plating.
- Wipe it before you put it away. Jewelers Mutual suggests a soft, lint-free or microfiber cloth before and after wearing, because dirt and oils trap moisture against the metal. Use a plain cloth, not a polishing cloth: polishing takes plating off.
- Rotate the pieces you love. Plating wear adds up hour by hour, and a ring worn every day takes the hardest beating any plating gets.
- Keep water off glued stones. Rhinestones are crystal glass or acrylic, the classic ones metal-backed according to Wikipedia, and in costume pieces they may be glued in. Clean around them with a barely damp swab and never soak the piece; if one has fallen out, see can costume jewelry be repaired?
- Clean gently. Warm water with a drop of dish soap, a soft brush, a rinse and a complete dry; see how to clean gold-plated jewelry.
Storage that slows tarnish
- Seal it. Jewelers Mutual recommends an airtight plastic container or a lidded, felt-lined jewelry box, and for pieces you care about, each one in its own cloth pouch or zip-top bag.
- Add an absorber. A strip of anti-tarnish paper in the bag, or a piece of chalk, activated charcoal or a silica gel packet, again per Jewelers Mutual. Replace them as the maker directs.
- Dry it first. Moisture is what lets the reaction run, Jewelers Mutual notes for brass, so sealing a damp piece in a bag traps the problem in with it.
- Keep pieces apart. Jewelers Mutual points out that scratches expose fresh metal and trap dirt and moisture, so a chain loose in a tray of rings is wearing the plating even when nobody's wearing the jewelry.
- Fasten chains before bagging so they don't knot and rub; see how to keep necklaces from tangling.
Do clear nail polish and protective coatings work?
For a while, and only where the coat stays intact. A clear coat is a barrier between metal and skin, air and moisture. The American Academy of Dermatology suggests clear nail polish as a barrier on nickel-containing metal that touches skin, with the warning that it will need to be re-applied often. On jewelry, it wears fastest exactly where plating wears fastest: inside a ring band, under a bracelet, on a clasp.
Conservators are cautious about coating metal. The Canadian Conservation Institute notes that lacquer always alters an object's appearance and is difficult to apply in a very thin yet even coat. For jewelry there's a second catch: a coating has to be removed before any re-plating, because plating only bonds to a spotless surface.
Where a coat makes sense: the inside of an inexpensive ring that marks your finger, or the back of a pendant that sits on skin, renewed as it wears. Where it doesn't: pearls, which GIA says cannot withstand harsh cleaning solutions, and pieces with glued stones, where you'd be brushing solvent around the adhesive.
Buying pieces that stay bright longer
Labels mean something under the FTC's Jewelry Guides, and thickness decides how long a gold layer lasts with use, as Wikipedia's gold plating article puts it:
- Gold electroplate: the thinnest legal layer. Fine for earrings and pendants worn now and then.
- Heavy gold electroplate: a much thicker minimum, at least 2.5 microns.
- Vermeil: sterling silver with at least 2.5 microns of 10 karat or better gold. When it wears through, it's silver underneath rather than brass.
- Gold-filled: gold bonded on mechanically, at least 1/20 of the metal's weight, far thicker than plating.
"Gold-tone" isn't one of these terms: it describes a color only. If your skin reacts, look for nickel-free as well, though nickel-free isn't tarnish-free. See which jewelry metals don't tarnish.
When prevention is too late: re-plating at JewelryRepair.com
No habit puts back plating that has already worn through; only a new layer does. Listed prices, Nov 18, 2026:
- Gold Plating, flash plating in yellow gold: $60 for a silver ring or pendant; $173 for a brass ring ($60 + $113); $223 for a brass necklace ($60 + $50 + $113); $240 for a copper ring ($60 + $180), which gets an underlayer first. A 1–2 micron layer for daily wear adds $250, so a brass ring at that thickness is $423 ($60 + $113 + $250).
- Rhodium Plating for silver-tone fashion pieces, using the gold-plated / fashion metal option: $74 for a ring ($69 + $5), $94 for earrings ($69 + $20 + $5), $114 for a necklace ($69 + $40 + $5).
- Start with an evaluation for costume pieces. They're already plated, their base metals vary, and plated pieces that need soldering or polishing are quoted before any work. So the $19 Mail-In Evaluation, credited in full toward the work you approve, confirms what the piece is and what the re-plate will cost. Metal Testing & Verification alone is $15 per item.
The honest math: re-plating often costs more than a costume piece did new, so it makes most sense for vintage, signed or sentimental jewelry. The 1-year workmanship guarantee covers plating that wears prematurely, not normal wear. Shipping is $30 round trip per order by UPS, however many pieces share the box. Re-plating is done at Sky Jewelry's New York studio, where the family has worked on Lenox Avenue since 1989 and completed over 50,000 repairs since 1989; each piece is photographed on arrival and before it leaves, and a second jeweler checks the work.
Questions
Does clear nail polish keep fake jewelry from tarnishing?
How do you keep fake gold jewelry from turning green?
How do I keep a cheap ring from tarnishing or turning my finger green?
Can you shower with gold-plated or costume jewelry on?
Is there a spray that makes jewelry tarnish-proof?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list