Jewelry repair questions · Metals, plating & finishing
How do you clean and polish tarnished sterling silver jewelry at home?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Clean only as needed. Every polish or dip removes a little silver along with the tarnish.
- Light tarnish: a silver polishing cloth. Heavy tarnish on plain sterling: a silver polish, or a dip applied locally and rinsed well.
- Never: toothpaste, baking-soda paste, or brass and chrome cleaners.
- Keep out of dips: pearls, opal, turquoise, coral, amber, anything glued, and oxidized pieces whose dark recesses are part of the design.
Prices
| Service | Price | What's included |
|---|---|---|
| Jewelry Polishing | from $30 | Progressively finer compounds on the wheel, with details and milgrain done by hand, to a mirror, satin or brushed finish. Sterling: ring or earrings $30, bracelet $50 ($30 + $20), pendant $60 ($30 + $30), necklace $105 ($30 + $75). |
| Jewelry Spa | from $44 | Ultrasonic bath, steam and hand polish, plus a written inspection report. A sterling bracelet or necklace is $56 ($44 + $12). |
Before you start: three checks
- Is it sterling or plated? Look for 925, Sterling or Ster. On silver-plated pieces the silver is only a surface layer, and the Canadian Conservation Institute (CCI) warns that any method of tarnish removal may be very damaging to plating. Give plated pieces soap, water and a soft cloth only (see how to clean silver-plated jewelry, and for other metals, how to clean tarnished jewelry).
- Does it have pearls, soft stones or glue? GIA advises cleaning pearls with a soft brush and warm, soapy water, laying them flat to dry, and keeping pearls, coral and amber out of ultrasonic cleaners. GIA notes that opal can fracture with sudden temperature change and that turquoise is porous, and the International Gem Society warns never to soak doublet and triplet opals, thin opal layers glued to other layers, since that might dissolve the glue.
- Is the dark part supposed to be there? When people ask how to remove "oxidation" from silver, they usually mean tarnish, which is silver sulfide: UC Davis chemists note it forms with sulfur, not oxygen. Jewelers' oxidized silver is different, darkened on purpose, often with liver of sulfur, so the recesses frame the design. A dip or an all-over polish takes that off along with the tarnish.
Each method, and how to use it safely
Soap and water. It lifts skin oil and lotion, which make tarnish look worse. CCI recommends a non-ionic or anionic detergent in distilled water, then a rinse and a soft-cloth dry; at home, a drop of mild, unscented dish soap in lukewarm water does the job. The Sheffield Assay Office's warning about detergents (below) concerns frequent use, so wash only when needed and dry fully.
Silver polishing cloth. CCI says impregnated cloths are most useful for lightly tarnished silver, because they carry less abrasive than liquids or pastes. More in how to use a silver polishing cloth.
Silver polish. For tarnish a cloth won't shift, use a polish made for silver. CCI cautions that many commercial polishes contain ammonia, which dissolves copper and can leave a green residue. Work small areas with a soft cloth, then wash off the residue and dry.
Silver dip. A dip works chemically and fast, which is the risk: CCI warns it can over-clean a submerged piece and must never be used on objects with sealed hollow parts, where it can't be washed out. That rules out hollow beads and hollow chains. Dab it on with a cotton swab, wear rubber gloves and work in a well-ventilated space, as CCI advises, and rinse thoroughly. Afterward, handle it with cotton gloves or clean hands: Sheffield notes rubber carries sulfur that tarnishes sterling faster. A dipped surface is very reactive and tarnishes again quickly, so Icon, the UK conservation body, advises fresh solution every time and a finish with a silver cloth. More in is silver dip safe for jewelry?
Foil and baking soda: what it does and doesn't do
Laying silver on aluminum foil in hot water with baking soda does work. It's electrochemistry: the aluminum gives up electrons and the silver sulfide turns back into silver, which UC Davis chemists note happens without removing any silver.
CCI notes that pitting can occur if the aluminum surface goes inert and that objects cleaned this way may tarnish more quickly, and, as with dips, solution trapped in a sealed hollow part is hard to wash out. The Sheffield Assay Office lists aluminium foil, baking soda, toothpaste, detergents and vinegar as common remedies that may cause long-term damage to silver and gemstones if used frequently. The bath can also lighten the darkened recesses of an oxidized piece. If you use it, keep it to plain sterling with no stones, glue or hollow parts. For other kitchen remedies, see vinegar, baking soda or peroxide?
What not to use
- Brass or chrome cleaners: Icon warns they aren't designed for silver and carry much harsher chemicals and abrasives. Multi-purpose metal polishes: CCI notes they are more abrasive than silver polishes and remove more silver.
- Abrasive creams, wadding and rouge sticks: Icon notes that with repeated cleaning they wear away silver and engraved inscriptions.
- An ultrasonic cleaner for tarnish: GIA describes ultrasonic cleaners as removing dirt and buildup, and they aren't among the tarnish-removal methods CCI describes (polishes, chemical dips and electrochemical reduction), so use one for grime, not tarnish. More in are ultrasonic cleaners safe for jewelry?
Stones, pearls and oxidized finishes
- Stone-set sterling: clean the metal with a cloth, working around the setting rather than dipping the piece. While you're there, check the stones: one that clicks or shifts needs Stone Tightening (from $50), not cleaning. See also how to clean silver jewelry with stones.
- Oxidized silver: polish only the raised surfaces with a cloth and leave the recesses dark. The Sheffield Assay Office notes that removing all the tarnish from pieces with relief decoration can leave them looking lifeless. Our guide to cleaning oxidized silver has more.
- An oxidized finish already polished away: ask for a free quote through the on-site chat or the contact form, or book the $19 Mail-In Evaluation, credited in full, so a jeweler can confirm how to restore it.
When to hand it to a jeweler
Some tarnish isn't worth fighting at home: black tarnish packed into a fine chain or filigree, pieces with stones you can't soak, and anything scratched, since tarnish removal doesn't touch scratches. At JewelryRepair.com, the mail-in service of Sky Jewelry in New York, Jewelry Polishing starts at $30 for a sterling ring or earrings and the Jewelry Spa at $44. Plated pieces that need polishing are priced by free quote. For prices side by side, see what professional cleaning and polishing cost.
Shipping is $30 round trip by UPS; each piece is photographed on arrival at the New York studio and before it ships back, and the work carries a 1-year workmanship guarantee. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989. The family has completed over 50,000 repairs since 1989.
Questions
What is the best homemade silver cleaner?
Can I use a jewelry cleaner on silver, or silver polish on gold?
Does polishing silver remove metal?
How much does professional silver jewelry cleaning cost?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list