Jewelry repair questions · Metals, plating & finishing

How do you clean a tarnished silver chain, necklace or bracelet?

For light tarnish, draw the chain through a silver polishing cloth section by section. For dark tarnish, work a gentle silver polish along short sections, then wash every trace out with warm water and a drop of mild dish soap and dry it flat. Skip toothpaste, and keep dips and foil away from hollow, plated or oxidized chains.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

Below 50%relative humidity for storing silver, to slow tarnish
$56Jewelry Spa clean and inspection for a silver necklace or bracelet ($44 + $12)
$15Chain Untangling, first chain (each additional chain $15)
50,000+repairs since 1989, family jewelers on Lenox Avenue

The short version

  • Light, yellowish tarnish: a silver polishing cloth is the gentlest fix, and the Canadian Conservation Institute (CCI) recommends exactly that for lightly tarnished silver.
  • Grimy or dull: warm water, a drop of mild dish soap and a soft brush lift lotion and skin oil. Soap removes grime; it doesn't remove tarnish.
  • Dark or black tarnish: a gentle silver polish on a cloth, worked along a short section at a time and washed out completely.
  • Avoid: toothpaste, vinegar, multi-purpose metal polish, and dips or foil baths on hollow, plated or deliberately blackened chains.
  • Store it dry, fastened and laid straight, in an anti-tarnish pouch, below 50% relative humidity if you can.

Prices

Service PriceWhat's included
Jewelry Spa from $44Ultrasonic bath, steam and hand polish with a written inspection report. Silver pendant $44; silver bracelet or necklace $56 ($44 + $12).
Jewelry Polishing from $30For deep tarnish and fine scratches: worked through progressively finer compounds, with details done by hand. Silver bracelet $50 ($30 + $20), pendant $60 ($30 + $30), necklace $105 ($30 + $75).
Chain Untangling from $15Knots relaxed under magnification with the chain under no tension, then ultrasonically cleaned and inspected. $15 for the first item and $15 for each additional one.
Rhodium Plating from $69A bright rhodium layer over sterling that keeps tarnish off while it lasts. Silver necklace $109 ($69 + $40), necklace with pendant $124 ($69 + $55); oxidation, to re-darken a blackened design, +$28.
Charm & Pendant Soldering $69Charms fixed on permanently by soldering or laser-welding the connecting link closed, so they still swing but can't fall off. For several charms, the total is confirmed before work.

Why a chain tarnishes faster than a pendant

Tarnish is a chemical layer, not dirt. Silver reacts with sulfur gases in the air, mostly hydrogen sulfide, to form silver sulfide, and in sterling, which is at least 92.5% silver with the rest usually copper, the copper forms copper sulfide as well. CCI explains that the color tracks the thickness: yellow, then red-brown, then blue, and black once the layer passes roughly 100 nanometers.

A chain has far more surface than a pendant of the same weight, and much of it is hidden where links touch. Tarnish builds in those joints and in the grooves of rope, wheat and Byzantine weaves, where a cloth can't reach, which is why a chain can look clean on top and dark when you flex it. The Sheffield Assay Office lists what speeds it up: rising humidity (it recommends keeping silver below 50% relative humidity), skin oils and sweat, perfume, hairspray and body lotion, foods such as eggs and onions, and rubber bands, wool and some papers and foams used in packaging. A chain worn against the skin and stored in a damp bathroom gets most of these at once.

Dips, foil, toothpaste and vinegar: what's safe for a chain

  • Silver dip. Fast, but harsh. CCI advises applying a dip locally with a swab rather than submerging, warns that dips can over-clean and pit silver, and says never to use them on objects with sealed hollow parts. Many rope and herringbone chains are hollow, and liquid trapped inside keeps working after you rinse. If you use a dip on a solid chain, keep it to seconds and rinse thoroughly. More in is silver dip safe for jewelry?
  • Foil and baking soda. The chemistry is real: CCI describes conservators converting tarnish back to silver with aluminum in a warm sodium carbonate (washing soda) solution. It also notes the method leaves a matte surface, can pit silver if the aluminum stops working, and that silver cleaned this way may tarnish faster. Reasonable as an occasional rescue for a solid, plain chain gone black; not a weekly routine.
  • Toothpaste, baking soda paste and vinegar. The Sheffield Assay Office lists aluminum foil, baking soda, toothpaste, detergents and vinegar among home remedies that can cause long-term damage to silver and any gemstones if used often. Toothpaste is abrasive, and on a chain it packs into the links. Detergents are on that list too, which is why a soap-and-water wash should be occasional, gentle and followed by a thorough rinse; CCI's own care note washes silver in a mild detergent and rinses it in distilled water.
  • Multi-purpose metal polish. CCI warns these remove more silver than polishes made for it. Polishes containing ammonia can leave a residue that turns green, so wash every trace out of the links.

For the full comparison of home remedies, see cleaning jewelry with vinegar, baking soda or peroxide.

Chains that need a lighter touch

  • Snake, herringbone and other flat, tight weaves. They're easily kinked. Draw the cloth along the chain in one direction, never fold or wrap it around your fingers, and lay it flat to dry. If one is already kinked, see can a kinked herringbone chain be repaired?
  • Hollow chains. Keep any wash brief, skip dips and foil baths, and dry thoroughly so no water sits inside. If one breaks, Chain Soldering laser-welds hollow chains, which can't take a torch's heat without collapsing (from $30, hollow +$20); chain soldering cost covers hollow chains and when a chain isn't worth repairing.
  • Oxidized or blackened designs. The dark recesses are intentional. Polish only the raised surfaces with a cloth; a dip strips the finish. If it's already gone, Oxidation (+$28) on the Rhodium Plating page puts it back, and cleaning oxidized silver covers the care.
  • Silver-plated chains. CCI warns that any method of tarnish removal can be very damaging to silver plate, because the silver layer is thin. Use a soft cloth lightly. Not sure it's sterling? Look for 925 or Sterling near the clasp, or book Metal Testing & Verification ($15).
  • Charm bracelets and pendants. Take the pendant off and clean it separately. Keep charms with stones, pearls, enamel or glass out of the water and clean around them. While you're at it, check each charm's jump ring: a squeezed-shut ring is how charms go missing, and Charm & Pendant Soldering ($69; for several charms, the total is confirmed before work) closes them permanently.

When to hand it to a jeweler, and what it costs

Send it in when black tarnish sits deep in a rope or Byzantine weave the cloth can't reach, when the chain is knotted, or when cleaning turns up a weak clasp, an open jump ring or a thin link. At JewelryRepair.com, the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989:

  • Jewelry Spa: $56 for a silver necklace or bracelet ($44 + $12), $44 for a pendant. An ultrasonic bath loosens what's packed between the links, steam blasts it out, and a hand polish and written inspection report follow.
  • Jewelry Polishing: $105 for a silver necklace ($30 + $75), $50 for a bracelet, $60 for a pendant, for heavy tarnish and fine scratches.
  • Chain Untangling: $15 for the first chain and $15 for each additional one, untangled under magnification and ultrasonically cleaned.
  • Rhodium Plating: $109 for a silver necklace ($69 + $40). The rhodium layer keeps sulfur off the silver for as long as the plating lasts; like any plating, it wears with time.
  • Repairs found along the way: Clasp Replacement from $48, Jump Ring Repair from $19, Chain Soldering from $30 for one break in silver. Every repair price already includes a clean and polish.

Shipping is $30 round trip per order by UPS, with the prepaid label in your account and $100 of coverage each way. Your chain is photographed when it reaches the New York studio and again before it ships back, and a second jeweler checks the work.

Questions

Can I use toothpaste to clean a silver chain?
It's better not to. The Sheffield Assay Office lists toothpaste among home remedies that can cause long-term damage to silver and any gemstones when used often. It's abrasive, so it leaves fine scratches, and on a chain it packs into the links, where it's hard to rinse out. A silver polishing cloth, or warm water with a drop of mild dish soap and a soft brush, does the job without the grit.
How do you clean a sterling silver chain that has turned black?
Black tarnish is a thick sulfide layer, past roughly 100 nanometers according to CCI, so a cloth alone is slow. Wash the chain first, then work a gentle silver polish along short sections and wash it out completely. An occasional aluminum and washing soda bath can help a solid, plain chain. For a rope or Byzantine weave, Jewelry Polishing at JewelryRepair.com is $105 for a silver necklace.
Why does my silver chain tarnish so fast?
Usually it's humidity, skin and storage. Silver reacts with sulfur gases, and the Sheffield Assay Office says it tarnishes faster as humidity climbs, recommending under 50%. Sweat, lotion, perfume and hairspray speed it up, as do rubber bands, wool, and paper, cardboard and some foams. CCI adds that freshly polished silver tarnishes more quickly. Put the chain on after lotion and perfume, and store it dry in an anti-tarnish pouch.
How do I clean a silver chain with a pendant or charms on it?
Take the pendant off and clean it separately, then clean the chain on its own. On a charm bracelet, keep charms with stones, pearls, enamel or glass out of the water and clean around them with a cloth. Check each charm's jump ring as you go: a ring that has opened is how charms get lost. Charm & Pendant Soldering ($69; for several charms, the total is confirmed before work) closes them permanently.
Can a silver-plated chain be cleaned the same way?
Only gently. CCI warns that any method of tarnish removal can be very damaging to silver plate, because the silver is a thin layer over another metal. Use a soft polishing cloth lightly and skip dips, foil and polish. If you're not sure whether a chain is sterling or plated, Metal Testing & Verification at JewelryRepair.com is $15 per item, and plated pieces that need polishing are priced by free quote.
How do you make a silver chain shiny again?
Draw a silver polishing cloth along it in one direction, a few inches at a time, and the shine comes back from light tarnish. For dark tarnish, work a gentle silver polish along short sections, then wash every trace out of the links and dry it flat. For deep tarnish in a rope or Byzantine weave, or fine scratches, Jewelry Polishing at JewelryRepair.com is $105 for a silver necklace ($30 + $75).