Jewelry repair questions · Chains, clasps & bracelets

Can a broken or kinked herringbone chain be repaired?

A clean break is usually repairable: the link is rejoined, though on herringbone the joint can sometimes be seen up close. A kink is harder: shifted links can often be worked back close to flat, but the crease may not vanish and can return. JewelryRepair.com rejoins a broken herringbone from $30; kinks start with a $19 evaluation.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$41one break, solid 14K yellow gold ($30 + $7 + $4)
$61one break, hollow 14K yellow gold, laser-welded ($41 + $20)
$19Mail-In Evaluation for a kink, credited in full
50,000+repairs since 1989

The short version

  • A clean break is usually repairable: the link is rejoined and polished, though on herringbone the joint can sometimes be seen up close. A break that has started to unravel neighboring links goes to an evaluation first.
  • A kink (a raised ridge where links have shifted out of line) can often be worked back toward flat by hand, but bench jewelers are candid that it may not look new and can kink again.
  • Several kinks, cracked links or a crushed hollow section may not be worth repairing; an evaluation tells you before you spend more.
  • Don't flatten a kink with pliers or a hammer, or keep flexing a creased section.

Prices

Service PriceWhat's included
Chain Soldering $41 solid 14K yellow gold
$61 hollow 14K yellow gold
One break rejoined and polished. Choose "Something else" as the chain type: herringbone carries no style charge. Solid chains are torch-soldered with solder matched to the chain's karat and color; hollow chains are laser-welded (+$20), because torch heat can collapse thin hollow walls. A second break adds $17.
Mail-In Evaluation $19For a kink, crease, lifted links or a crushed hollow section: examined under magnification, with photos and an itemized quote. Credited in full toward approved work; a declined chain ships back with the photos and findings.
Clasp Replacement from $48When the chain is sound but the clasp won't close: a spring ring, lobster or box clasp matched to the chain's gauge and weight and soldered on, or the original repaired when it's salvageable.

Break or kink? How to tell which you have

Lay the chain flat on a dark cloth under a bright light and run it slowly between your fingers.

  • A break is a complete separation, often with a link torn open. Cooksongold, a jewelry supplier, notes that most wear on a chain happens where the clasp joins it, because the stress is greatest there, so check that end first.
  • A kink is a bump, ridge or crease you can feel, where links stand up or catch the light differently. Ragged or lifted edges along a stretch are an early kink, or the remains of one straightened before.
  • A dent or flattened spot in a hollow chain looks dull and collapsed rather than raised: crush damage, which starts with an evaluation too.

Not sure whether yours is hollow? A wide herringbone that feels surprisingly light may be. Choose "Not sure" when you book; the jeweler confirms it on arrival, and if the price changes, you approve it first.

Why herringbone kinks, and why a kink can come back

Rio Grande, a jewelry supply house, describes herringbone as rows of V-shaped links, each row angled opposite the one beside it, with the links lying flat for a low-profile, fluid look. The links are flattened and packed tightly, and each one sits in a shallow seat formed against its neighbors. That's what gives herringbone its mirror-like surface, and it's also its weakness.

Bend the chain sharply, by sleeping in it, catching it in a zipper, wrapping it around a finger or letting a heavy pendant pull it into a fold (see whether you can put a pendant on any chain), and a group of links shifts past those seats. A jeweler on Ganoksin's Orchid forum, a long-running bench jewelers' discussion board, explains that the shifted links form humps that stop them from sliding back on their own, which is why a kink stays put. Jewelers in the same discussion warn that the kink will come back, and one describes a shop policy of scrapping herringbone chains rather than repairing them, because another section often kinks next.

How a jeweler repairs a break, and what can be done for a kink

A break. The jeweler trims back to sound links under magnification, which can make the chain very slightly shorter. Solid herringbone is aligned and torch-soldered with solder matched to the chain's karat and color, then filed and polished. Torch heat can collapse thin hollow walls, so JewelryRepair.com laser-welds hollow chains instead, joining the metal at a pinpoint while the rest of the link stays cool. Because herringbone's links lie flat and mirror-bright, the joint can sometimes be seen up close even after polishing. White gold solder work includes rhodium on the repaired area.

A kink. There's no listed kink-removal service, and that's deliberate: whether a kink can be improved depends on how far the links have shifted, whether any have cracked and whether the chain is hollow. The method bench jewelers describe is slow handwork: working the shifted links back with a rocking motion of both hands, tightening ragged edges by stropping the chain over a fixed mandrel, then burnishing it on a bench block. Done well, the chain comes back close to its original shape, but not always invisibly, and not always for good.

That's why a kinked herringbone, or a break that has started to unravel the links beside it, starts with the Mail-In Evaluation: photos, a plain-English assessment and an itemized quote, and nothing proceeds until you approve it.

When repair isn't worth it, and the alternatives

  • Several kinks along the chain, or a chain that has been straightened before: by the bench jewelers' own account another kink is likely, so paying to straighten one spot may not be money well spent.
  • Cracked links inside a kink can't simply be burnished flat. The realistic options are removing that section and rejoining the ends, which shortens the chain, or retiring it; the evaluation tells you which applies.
  • Damage near the clasp: if a slightly shorter chain suits you, removing the damaged end may be simpler than straightening it. Chain Shortening starts at $44; choose "Something else" as the chain type for herringbone.
  • A very fine or inexpensive chain: the chain soldering cost guide covers when a repair costs close to a new chain.
  • You decide after you've seen the findings. If you decline, the chain ships back with the photos, and the return trip is already covered by the $30 round-trip shipping.

Can I fix a kinked herringbone myself?

Not well, and it's easy to make it worse. Pliers grip the thin, flattened links hard enough to mark them; a hammer or a heavy book presses the bump down without putting the links back in their seats; and twisting the wrong way lifts more links. Even at the bench, the forum jewelers describe the work as slow, and on chains with a bright face and a textured face they use the difference to tell which way the links have turned. Why herringbone behaves differently from cable or curb chain is covered in how to get a kink out of a necklace chain.

What you can do at home is stop the damage spreading. Take the chain off, lay it out straight, and don't wear it until it's been looked at. If you can see a crack across a row of links, don't flex that spot at all.

What it costs at JewelryRepair.com

For herringbone, choose "Something else" as the Chain Soldering chain type, which adds no style charge. Prices from the live repair page, Nov 18, 2026, each including a clean and polish and the 1-year workmanship guarantee:

  • Sterling silver, one break: $30.
  • Solid 14K yellow gold: $41 ($30 + $7 + $4). Solid 18K yellow gold: $49 ($30 + $7 + $12). Solid 14K white gold: $48 ($30 + $14 + $4).
  • Hollow 14K yellow gold, laser-welded: $61 ($41 + $20). Hollow 18K yellow gold: $69 ($49 + $20).
  • Two breaks in solid 14K yellow gold: $58 ($41 + $17).
  • A clasp that won't close on a sound chain: Clasp Replacement from $48.
  • A kink, crease or crushed section: the $19 Mail-In Evaluation, credited in full toward approved work.

Before you ship, lay the chain straight or in a loose loop in a small sealed bag; don't fold it, wind it tightly or knot the ends. Shipping is $30 round trip per order by UPS with $100 of coverage each way (see how shipping insurance works for a pricier chain). Your chain is photographed when it arrives at the New York studio, so you can compare the joint before and after; the work is done by a bench jeweler at JewelryRepair.com, the mail-in service of Sky Jewelry (family jewelers on Lenox Avenue since 1989, over 50,000 repairs since 1989), and checked by a second.

Questions

Can a kinked herringbone chain be fixed?
Often it can be improved, but not always made invisible. Jewelers work the shifted links back by hand and burnish the chain, and the result can be close to new, yet bench jewelers warn the kink can return. Because the outcome depends on the damage, JewelryRepair.com starts kinks with the $19 Mail-In Evaluation: photos and an itemized quote before any work, credited in full if you go ahead.
How much does it cost to fix a broken herringbone chain?
At JewelryRepair.com, one break is $30 in sterling silver and $41 in solid 14K yellow gold. Hollow herringbone adds $20 for laser welding, so a hollow 14K chain is $61, and a second break adds $17. Other karats are in the cost section above, and the exact total shows on the repair page before you pay.
Is it worth repairing a herringbone chain?
For a clean break, usually yes: one break in a solid 14K yellow gold herringbone is $41 at JewelryRepair.com, though the joint can sometimes be seen up close. For a chain with several kinks or cracked links, maybe not, since jewelers warn that kinks tend to return. The $19 Mail-In Evaluation gives you photos and an itemized quote first; if you decline, the chain ships back with the findings.
Can a hollow herringbone chain be soldered?
Yes. At JewelryRepair.com hollow chains are laser-welded rather than torch-soldered, because torch heat can collapse thin hollow walls; the laser joins the metal at a pinpoint while the rest of the link stays cool. The laser weld adds $20 to Chain Soldering, so one break in a hollow 14K yellow gold chain is $61, polished and covered by the 1-year guarantee.
How do I keep a herringbone chain from kinking?
Take it off for sleep, exercise and anything that pulls at your neckline, and store it laid out straight or hanging rather than coiled or tangled with other chains. Fasten it without folding the chain back on itself, and go easy with heavy pendants, which bend a flat chain where the bail sits. If a ridge appears, stop flexing that spot and have it checked.