Jewelry repair questions · Chains, clasps & bracelets

How do you get a kink out of a necklace chain without breaking it?

Unclasp the chain, lay it flat and find which way the links are bent. Hold it with your fingertips on either side of the kink and rotate gently against the bend, a little at a time, never pulling the ends. If a link is cracked, stretched or crushed, stop: that needs soldering. JewelryRepair.com evaluates kinks for $19, credited in full.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$19Mail-In Evaluation for a kink that won't come out, credited in full
$30Chain Soldering, one break in sterling silver
$15Chain Untangling, first chain, if it turns out to be a knot
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • No tension, ever. Pulling the ends of a kinked chain strains the links on either side of the bend.
  • Work the bend, not the chain. Fingertips on both sides of the kink, small rotations against the direction it's bent, then let it hang and check.
  • Stop after a few tries. Repeated bending weakens the links.
  • Snake, box and herringbone chains are a different case, with tightly packed links.
  • By mail: a stubborn kink starts with the $19 Mail-In Evaluation; a cracked link is Chain Soldering, from $30.

Prices

Service PriceWhat's included
Mail-In Evaluation $19For a kink you can't work out, a crease in a snake, box or herringbone chain, or a link you think is cracked: examined under magnification, with photos and an itemized quote. Credited in full toward approved work.
Chain Soldering from $30A cracked or broken link rejoined: torch solder on solid chains, laser weld on hollow ones (+$20). $41 in solid 14K yellow gold; rope adds $25, Cuban $38.
Chain Shortening from $44When the damaged section is near the clasp and a shorter chain suits you: links removed at the clasp end, clasp re-soldered, removed links returned.
Chain Untangling from $15A knot rather than a kink, opened under magnification with the chain under no tension, then cleaned and inspected.

Kink, knot, twist or damaged link? How to tell

Lay the chain straight on a dark cloth under a bright light, then pick it up by one end and let it hang.

  • A knot is links passed through each other, with the chain bunched up; it comes out with patience: see how to untangle a knotted necklace chain.
  • A kink is a sharp bend where a few links have been forced out of line and lock against their neighbors. That spot stays bent or stiff when the chain hangs.
  • A twist is a run of links turned on edge. Curb and Figaro links are twisted to lie flat when they're made, so a twisted stretch shows as a section that flips over when you lift the chain.
  • A damaged link is the one to worry about: longer and thinner than its neighbors (stretched), squashed (crushed, common on hollow chains), split, or opened at its join. It often sits right at the kink.

Check the bent spot with a magnifier or a zoomed-in phone photo. If a link shows a line across it or looks different from the rest, don't straighten it.

How to work a kink out of a cable, curb or Figaro chain

Open-link chains are the forgiving ones. Rio Grande, a jewelry supply house, describes cable as the most common chain style, single links joined perpendicularly end to end, and curb and Figaro as cable designs whose links are twisted to lie flat. A kink in them is usually a few links jammed at an angle, and it can often be eased back:

  • Unclasp it and take off any pendant.
  • Lay it on a hard, plain surface in good light and find the kink's direction: which way the links are bent or turned.
  • Hold the chain between thumb and index finger on each side of the kink, a link or two away from it. A bench tip published on Ganoksin, the jewelers' reference site, recommends this grip for a bad kink: turn your hands slowly in small circles, against the direction of the twist.
  • Move a little, then check. Let the chain hang after each small rotation. When the links drop back into line, stop.
  • Give up after a few tries. If it won't move or springs back, the links may be bent or damaged.

Skip repeated flexing. Wikipedia's article on work hardening notes that a work-hardened metal loses ductility, so bending the same links back and forth leaves them less able to bend without cracking. That's why jewelers on Ganoksin's Orchid forum describe annealing, or heat-softening, a chain before they rework it.

Rope, wheat, Cuban, snake and box chains: be more careful

  • Rope and wheat. Rio Grande describes rope chain as twisted links each connected to two others in a continuous row, and wheat as a variation of rope with closely interconnected figure-eight links. Because each link is held by its neighbors, a kink usually means links pushed out of the weave or flattened, not just turned. Don't twist it to straighten it. Hollow construction is common in rope chains, and a hollow link that has been flattened won't round out again by hand; see can a broken rope chain be repaired?
  • Cuban and other heavy curb chains. The links are thick and stiff. If a spot won't move with gentle hand pressure, don't reach for tools; have the link checked, because forcing a heavy link can open it.
  • Box chains. Rio Grande describes box chain as squared-off links that resemble cubes. On Ganoksin's Orchid forum, a fine sterling box chain straightened by hand went crinkly again as soon as it was laid down; respondents thought its links had probably been stretched or squeezed when pendants were put on and taken off, and most agreed it would never stay straight.
  • Snake and herringbone. Snake chain is made from curved plates tightly joined, and herringbone from rows of V-shaped links lying flat, so a sharp bend leaves a crease that may not come out fully. For flat chains such as herringbone, the Ganoksin bench tips give the gentle first try: lay the chain on a hard surface and roll across the kink with a wooden wallpaper seam roller. See can a snake or box chain be repaired? and can a kinked herringbone chain be repaired?

When a kink means damage, and what a jeweler does

A kink that won't come out with gentle hand pressure is usually one of three things:

  • A cracked link. It's rejoined with Chain Soldering: torch solder on a solid chain, filed and polished flush, or a laser weld on a hollow chain, which can't take a torch's heat without collapsing.
  • A stretched or crushed section. Weak links can be cut out and the ends rejoined, which shortens the chain by that much. If the damage is near the clasp, Chain Shortening removes links at the clasp end and returns them to you.
  • Links bent out of line but sound. Bench jewelers work these back by hand under magnification, softening the metal first where it needs it.

Which of the three you have is judged with the chain in hand, so JewelryRepair.com doesn't list kink removal at a set price. A kink starts with the Mail-In Evaluation: a jeweler examines the whole chain under magnification and sends photos and an itemized quote. Nothing proceeds until you approve it; if you decline, the chain comes back with the findings.

What it costs at JewelryRepair.com

Live prices on Nov 18, 2026, each with a clean and polish and the 1-year workmanship guarantee:

  • Mail-In Evaluation: $19, credited in full toward the approved repair.
  • Chain Soldering, one break: $30 in sterling silver; $41 in solid 14K yellow gold ($30 + $7 + $4). A hollow 14K yellow chain, laser-welded, is $61 ($41 + $20).
  • By chain type, solid 14K yellow gold: rope $66 ($41 + $25), Cuban $79 ($41 + $38), snake $54 ($41 + $13). Cable, box and ball add nothing; for curb, Figaro or wheat, choose "Something else," which also adds nothing.
  • Chain Shortening: from $44; a 2 mm 14K yellow gold cable chain is $55 ($44 + $6 + $5).
  • Chain Untangling: $15 per chain, if it's a knot after all.

Rush Service (+$50) ships an eligible chain repair back 2 to 3 days sooner. One $30 UPS round trip covers every chain in the box, label in your account, $100 covered each way; full-value cover on a $1,000 chain adds $22.50 (2.5% of the $900 above $100) for both legs.

Before you ship a kinked chain

  • Stop wearing it. Each flex strains the bent links.
  • Pack it straight or in a loose loop in a small sealed bag, never folded, wound tight or knotted, inside a plain box with nothing outside naming the contents.
  • Say where the kink is in your order notes, for example "two inches from the clasp."

Photos taken when the chain reaches New York show the kink as it arrived, and it returns signed for after a second jeweler checks the bench work. Sky Jewelry's family has worked on Lenox Avenue since 1989, with over 50,000 repairs in that time; JewelryRepair.com is its mail-in service.

Questions

Can a kinked gold chain be fixed?
Often, yes, if the links are bent but not cracked. Ease it back by hand with no tension, rotating against the bend a little at a time. If it won't move, or a link looks stretched or split, it needs a jeweler: at JewelryRepair.com a kink starts with the $19 Mail-In Evaluation, credited in full, and soldering a cracked link in solid 14K yellow gold is $41.
Will a kink straighten out if I keep wearing the chain?
No, and wearing it makes it worse. A kink is links locked out of line, and every movement flexes those same links, which is how a bent spot turns into a cracked one (the work-hardening point in the cable-chain section above). Take the chain off, try a gentle straightening by hand, and if the kink stays, have it looked at.
Can I use pliers to straighten a kinked necklace?
It's risky. Household pliers have serrated jaws that mark fine links and can crush hollow ones, and squeezing a kink flat presses links down without putting them back in line. Bench jewelers work stubborn kinks under magnification, softening the metal first where needed. At home, use your fingertips, and stop if the kink doesn't move after a few gentle tries.
Why does my chain keep kinking in the same place?
Usually because the links there are already bent, stretched or work-hardened, so they never sit fully back in line. A heavy pendant that folds the chain, or repeatedly threading pendants on and off, makes it worse. If the same spot keeps kinking, have it checked: the $19 Mail-In Evaluation at JewelryRepair.com tells you whether to solder, shorten or replace that section.
How much does it cost to fix a kinked chain?
It depends on what the kink turns out to be. At JewelryRepair.com a kink starts with the $19 Mail-In Evaluation, credited in full; if a link is cracked, Chain Soldering is $30 in silver. Shipping is $30 round trip per order, however many chains share the box.