Jewelry repair questions · Metals, plating & finishing

Can sterling silver get wet, and can it rust?

Yes, sterling silver can get wet, and no, it can't rust: rust is the corrosion of iron, and sterling is at least 92.5% silver, the rest usually copper. Plain water does no harm if you dry the piece, but chlorine, salt water and damp storage speed up tarnish. Orange or red-brown spots usually mean early tarnish or a steel part.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

92.5%minimum silver in sterling, stamped 925
Below 50%relative humidity conservators recommend for storing silver
$30professional polish, sterling ring or earrings
50,000+repairs since 1989

The short version

  • Water: plain water won't damage sterling silver. Dry it afterward, especially chains, clasps and the underside of stones.
  • Rust: sterling can't rust. Rust is the name for corrosion of iron and its alloys; sterling is at least 925 parts per 1,000 silver, and the rest is usually copper.
  • Chlorine and salt: these are the real risks. Jewelers Mutual says salt water and chlorine can damage jewelry, and adds sweat to the list for sterling.
  • Showers: an occasional one won't hurt. Daily soap and shampoo leave a dulling residue, and a steamy bathroom is a poor place to keep silver.
  • "Rust" spots: usually red-brown early tarnish, which wipes off, or a steel part such as a clasp spring, which doesn't.

Prices

Service PriceWhat's included
Jewelry Polishing from $30Tarnish and fine scratches taken off through progressively finer compounds, with details and recesses worked by hand. A sterling bracelet is $50 and a pendant $60.
Jewelry Spa from $44Ultrasonic bath, steam and hand polish to clear oils, lotion and grime packed into links and behind stones, plus a written inspection report from the bench.
Clasp Replacement from $48For a clasp whose spring has rusted or lost its snap: the old clasp removed at its solder joint and a new one sized to the chain, soldered on and action-tested.
Metal Testing & Verification $15For a "silver" piece that rusts or keeps marking your skin: hallmarks checked under magnification, then the metal tested and the result documented.

The details: what water, chlorine and salt actually do

Tarnish on silver isn't caused by water. It forms when silver reacts with sulfur gases in the air, mainly hydrogen sulfide, to make silver sulfide; in sterling, the copper forms copper sulfide as well, and the Canadian Conservation Institute notes that silver-copper alloys tarnish faster as their copper content rises. Water matters because humidity speeds the reaction: for the same amount of sulfur in the air, silver tarnishes faster as relative humidity climbs, which is why conservators store silver below 50% RH. Rust, by contrast, is a reaction specific to iron, so a solid sterling piece has nothing in it that can rust.

Salt and chlorine are the bigger threats. The Sheffield Assay Office, which hallmarks precious metal in the UK, explains that salt from fingerprints and sweat reacts with silver to form silver chloride, which is light-sensitive, so it darkens. Pool and hot tub water is chlorinated and seawater is salty, and Jewelers Mutual advises taking jewelry off before a pool or hot tub because chlorine can damage and discolor metals. One swim won't ruin a ring. A chain worn in the pool all summer darkens faster and unevenly, and the residue settles into links and clasp springs where a cloth can't reach.

Some sterling is sold rhodium-plated, and rhodium is used on sterling precisely to resist tarnish. Water doesn't change that layer, but wear does, and once the silver underneath is exposed it tarnishes like any other sterling.

How to tell tarnish from real rust

  • Yellow, red-brown or bluish patches that come off on a silver cloth: early tarnish. As the layer grows from 10 to 100 nanometers, the Sheffield Assay Office explains, its color moves from yellow through red-brown to blue; above about 100 nanometers it is black, the true color of silver sulfide. The red-brown stage is the one people mistake for rust.
  • An orange or red-brown crust on one part, often the clasp: probably iron or steel. The FTC's jewelry guides leave springs, screws, rivets, joints and catches out of the assay of a silver product, so the spring inside a sterling clasp doesn't have to be silver. If that part is steel and stays damp, it can rust while the chain stays bright.
  • Green or blue-green deposits: copper corrosion, which the Canadian Conservation Institute ranks as more serious than the black tarnish on copper alloys. Because sterling is usually alloyed with copper, green on a silver piece points to the copper reacting.
  • Rust spreading over the whole piece: it probably isn't sterling. Fashion jewelry is often silver-plated base metal. Try a magnet: silver isn't magnetic, while iron and steel almost always are (a few stainless steels aren't). A pull means iron or steel is in the piece; no pull proves nothing, because copper and brass aren't magnetic either. Look for 925, Sterling or Ster., and remember stamps can be wrong.

Shower, pool, ocean, hot tub: what to do with sterling

  • Hand washing and rain: fine. Pat the piece dry and let a chain air out before you put it away.
  • The shower: occasionally is fine; every day is where the dull, grayish look comes from. Store silver somewhere drier than the bathroom.
  • Pools and hot tubs: take it off. Both the Sheffield Assay Office and Jewelers Mutual advise removing jewelry before swimming.
  • The beach and the ocean: take it off, or rinse it in fresh water and dry it as soon as you can. Jewelers Mutual warns that dirt and small rocks are abrasive, and that cold water shrinks fingers, so a ring can slip off without you noticing.
  • Silver with pearls, opals or a darkened finish: be stricter. Jewelers Mutual says pearls and porous stones such as opals should never be submerged, and an oxidized finish is darkened on purpose, usually with liver of sulfur, so harsh cleaning strips the look you paid for.

How to get "rust" or tarnish off silver, at home or at the bench

Most "rust" on a silver necklace or ring is red-brown tarnish, which a silver polishing cloth removes; real rust means a steel part, usually a clasp spring, which gets replaced rather than cleaned. After salt or pool water, rinse the piece in fresh water, wash it with a drop of mild soap and a soft brush, rinse again and dry it completely. Light tarnish comes off with a silver polishing cloth. Go easy on kitchen remedies: the Sheffield Assay Office warns that aluminium foil, baking soda, toothpaste, detergents and vinegar can cause long-term damage to silver and gemstones if used often, and the Canadian Conservation Institute says silver should touch chemical dips as little as possible to avoid pitting. Our guide to cleaning tarnished sterling covers the home methods step by step.

At the bench, Jewelry Polishing is $30 for a sterling ring or earrings, $50 for a bracelet ($30 + $20), $60 for a pendant ($30 + $30) and $105 for a necklace ($30 + $75). The Jewelry Spa adds an ultrasonic bath, steam and a written inspection report: $44 for a sterling ring, earrings or pendant and $56 for a bracelet or necklace ($44 + $12). A rusted clasp is replaced under Clasp Replacement, from $48 for a small sterling spring ring. If rhodium-plated sterling has worn patchy, Rhodium Plating re-coats a sterling ring for $69. And if you're not sure the piece is silver at all, Metal Testing & Verification is $15 per item.

Before you ship

Dry the piece completely before you pack it, since any wrapping holds moisture against silver; for the few days in transit, a dry piece wrapped in cotton or a small pouch inside padding is fine. Add a note when you order if a clasp has rusted or the piece has spent the summer in a pool, so the jeweler checks the spring and the links. See how to ship a ring safely for packing details. JewelryRepair.com, the mail-in service of Sky Jewelry in New York, has done over 50,000 repairs since 1989.

Questions

Can I shower with sterling silver jewelry?
You can, but don't make it a daily habit. Water alone won't hurt sterling, but soap and shampoo leave a dulling residue in chain links and behind stones, and humidity speeds tarnish, which is why conservators store silver below 50% relative humidity. Take it off when you can, dry it when you can't, and keep it out of the bathroom between wears.
Does chlorine ruin sterling silver?
It can discolor it, so take silver off before a pool or hot tub. Jewelers Mutual warns that chlorine can damage and discolor metals and that salt water and chlorine can damage jewelry. Salt and sweat matter too: the Sheffield Assay Office explains that salt forms light-sensitive silver chloride on silver. Surface discoloration usually polishes off; a professional polish is $30 for a sterling ring.
Can you wear sterling silver in the ocean?
It's better not to. Salt water won't make sterling rust, but salt reacts with silver and speeds discoloration, and sand is abrasive enough to scratch it. Cold water also shrinks fingers, so a ring can slip off unnoticed, Jewelers Mutual warns. If your silver does get wet at the beach, rinse it in fresh water and dry it completely before you put it away.
How do I get rust off a silver necklace?
Most "rust" on a silver necklace is red-brown tarnish, which a silver polishing cloth removes. Real rust means iron or steel, often a clasp spring or a plated chain; a magnet pulls on iron and most steel but not on silver. A rusted clasp is replaced under Clasp Replacement from $48 for a small sterling spring ring, and Metal Testing is $15 per item.
Can pure silver rust?
No. Rust is corrosion of iron and its alloys, and fine silver contains no iron, so it can't rust. It does tarnish, from sulfur gases in the air, but more slowly than sterling: the Canadian Conservation Institute notes that silver-copper alloys tarnish faster as their copper content rises. Keep it dry and stored away from bathroom humidity to slow that down.