Jewelry repair questions · Chains, clasps & bracelets
How do you clean silver jewelry with stones?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Soap and water does most of the work. Jewelers Mutual calls warm water, mild dish soap, a soft toothbrush and a microfiber cloth the safest option for silver with diamonds or gemstones.
- Treat the metal and the stones separately. Tarnish lives on the silver; lotion and grime collect under the stones. The polishing cloth is for the first, the brush and soapy water for the second.
- No commercial silver cleaners near stones. Jewelers Mutual warns they may damage the stones.
- Know your stones. Diamond and cubic zirconia tolerate a short soak, as do untreated or heat-treated ruby and sapphire. Glass-filled, cavity-filled or dyed ruby and sapphire get a damp cloth only (GIA). Pearls, opal, turquoise and emerald get gentle soapy water and a soft cloth, nothing harsher.
- Check the settings while it's clean. A loose stone is easiest to spot, and cheapest to fix, right after a wash.
- Hand it over when the dirt is behind settings you can't reach, or you don't know what the stones are.
Prices
| Service | Price | What's included |
|---|---|---|
| Jewelry Spa | from $56 silver necklace or bracelet from $44 silver earrings | Ultrasonic bath, steam and hand polish, with a written inspection report from the bench. Suits diamonds and cubic zirconia in sound settings. A silver ring, earrings or pendant is $44. Pieces with pearls, opal, turquoise or emerald, or ruby or sapphire that may be glass-filled, cavity-filled or dyed: book the Mail-In Evaluation instead. |
| Stone Tightening | from $50 | For loose stones found while cleaning: each tested for movement under 10x magnification and secured the way its setting needs (prongs re-seated, bezels burnished). Up to eight stones per order. |
| Rhodium Plating | from $109 silver necklace | For rhodium-plated sterling that has started to tarnish because the plating wore through: polished, cleaned ultrasonically and with steam, and re-plated. A bracelet is $89 ($69 + $20). Pieces with pearls, opal, turquoise, emerald, or possibly filled or dyed ruby or sapphire start with the Mail-In Evaluation, since plating prep uses ultrasonic and steam. Tell us what the stones are when you book; the plan is confirmed when the piece arrives. |
| Mail-In Evaluation | $19 | For pearls, opal, turquoise, emerald, possibly treated ruby or sapphire, or stones you can't identify: examined under magnification, photographed and quoted item by item before anything is cleaned. Credited in full toward the work. |
Why stones change the rules
Most silver-cleaning advice is about removing tarnish, the dark silver sulfide that builds on the metal, and the fastest methods do it chemically (dips) or abrasively (polishes and pastes). On a plain chain that's fine in moderation. Add stones and three new problems appear.
- Some stones can't take the chemistry. GIA says pearls can be damaged by many chemicals and all acids, and that turquoise can be discolored by chemicals, cosmetics and even skin oils, with treated turquoise surfaces vulnerable to heat and solvents. The Canadian Conservation Institute (CCI) notes that the acids in silver dips damage organic materials.
- Some stones can't take heat or vibration. GIA estimates that 90 percent or more of emeralds are fracture-filled: ultrasonic vibration can weaken already-fractured stones, and steam can make oil or resin sweat out of the fractures. Opal can fracture with high heat or sudden temperature changes.
- Hard doesn't mean indestructible. Cubic zirconia rates 8 to 8.5 on the Mohs scale but is brittle, and the iridescent metal coatings on some rainbow-colored CZ aren't durable. Abrasive polish wears those coatings and packs into the settings.
There's also a cosmetic trap. A clear stone set in silver often looks dull not because its top is dirty but because soap, lotion and skin oil are packed underneath it, or the metal behind it has tarnished. That's why the brush has to reach the back of the setting, and why rubbing the front alone rarely brings the sparkle back.
Stone by stone: what's safe
- Diamond: GIA says diamonds can be cleaned safely with lint-free cloths, commercial jewelry cleaning solutions and household detergents, but not powdered abrasive cleansers. A few minutes in warm, soapy water is fine.
- Cubic zirconia: the same soap-and-water routine as diamond. Keep polish off coated, rainbow-colored CZ.
- Ruby and sapphire: GIA says warm, soapy water is always safe, and ultrasonic and steam are usually safe only for untreated, heat-treated and lattice diffusion treated stones. Fracture-filled (lead glass), cavity-filled or dyed stones should only be cleaned with a damp cloth, and GIA notes even mild acids such as lemon juice can damage them. If you don't know how yours was treated, clean it as if it were filled.
- Emerald: warm, soapy water with gentle scrubbing is the safest way, per GIA. No ultrasonic, no steam, no long soak.
- Opal: GIA calls warm, soapy water the only safe way to clean it. Keep it away from hot water and sudden temperature changes.
- Turquoise: warm, soapy water is safe, and GIA says never steam or ultrasonic. Wipe it after wearing, since skin oils and cosmetics can discolor it.
- Pearls: never ultrasonic or steam (GIA). Wipe them with a very soft, clean cloth after each wearing, use warm, soapy water only occasionally, and let the silk dry completely before wearing a strung piece.
- Don't know what it is? Clean it as if it were the most delicate stone on this list until you find out.
Getting tarnish off around the stones
- Polishing cloth, folded to a point. Work the plain metal and the links, up to the bezels and prongs, without rubbing across the stones. Gray on the cloth is the tarnish coming off.
- Dark lines along a bezel or inside a channel that the cloth can't reach are tarnish on metal you can't get at without abrasives. Soapy water lifts grime but not tarnish, and a thin dark edge is safer to live with than to scrub at.
- Dips: Jewelers Mutual's advice for gemstone pieces is not to use commercial silver cleaners at all. If a piece has only diamonds or cubic zirconia and you still want to try, CCI's careful method is to dab the dip on the metal with a cotton swab and rinse it off, never submerging the piece. More in is silver dip safe for jewelry?
- Foil and baking soda: this means soaking the whole piece in hot water, so it's out for pearls, opal, turquoise and emerald, and for anything with glued stones. It also strips intentionally darkened detail.
- Toothpaste: skip it. It's abrasive on silver, and the paste dries into the settings.
- Rhodium-plated sterling (often sold as rhodium over sterling) is plated precisely to keep tarnish off. If it's darkening, the rhodium has worn through, and re-plating, not harder cleaning, is the fix.
Earrings: posts, backs and CZ studs
Earrings with stones follow the same rules, but studs have their own trouble spots.
- Take the backs off and wash posts and backs separately in the same warm, soapy water. Skin oil and soap collect inside butterfly (push) backs, where a cloth never reaches.
- Brush the underside of each stud, where the stone sits in its setting. A cubic zirconia or diamond stud that looks gray is usually dull from residue packed behind the stone, not from the front.
- Dry the backs open. Lay posts and backs on a towel until they are completely dry before you refit them, so no water stays trapped against the silver.
- Check the grip. A butterfly back that slides on too easily is worth replacing before you lose a stud; see the most secure earring backs.
- Plain silver earrings without stones can be handled more freely; see how to clean silver earrings.
A professional clean of silver earrings with stones is the Jewelry Spa, $44, with a written inspection report that covers the settings.
While it's clean, check the settings
- Listen. Hold the piece next to your ear and tap it gently. A faint rattle is a loose stone.
- Feel. Press each stone lightly with a fingernail. Any movement means the setting needs tightening.
- Look at the prongs. A prong tip that has worn flat or lifted catches on knitwear; re-tip it before the stone goes missing. GIA notes that a diamond loose in its setting can wear through a prong over time.
- On a tennis bracelet, flex it gently along its length and look for links or settings sitting out of line.
- Check the clasp, which opens and closes every time you wear the piece.
If something moves, stop wearing it until it's fixed, and if a stone has already come out, keep it in a small sealed bag.
When to hand it to a jeweler, and what it costs
- A deep clean: the Jewelry Spa is an ultrasonic bath, steam and hand polish with a written inspection report from the bench. In sterling silver it's $44 for a ring, earrings or a pendant and $56 for a necklace or bracelet ($44 + $12); a 14K white gold necklace is $80 ($44 + $12 + $19 + $5). It's the right service for diamonds and cubic zirconia in sound settings.
- Pearls, opal, turquoise, emerald, possibly filled or dyed ruby or sapphire, or stones you can't identify: book the Mail-In Evaluation ($19, credited in full) instead, because ultrasonic and steam aren't safe for those stones. A jeweler examines the piece under magnification and quotes item by item, with photos, before anything is done.
- Loose stones: Stone Tightening, from $50 in silver, up to eight stones per order. A stone that has shifted or come out needs Reset Loose Stone, $89 flat. Worn prongs: Prong Re-Tipping, from $29 for 1 to 4 prongs in silver.
- Plated sterling that tarnishes: Rhodium Plating, $89 for a silver bracelet ($69 + $20) or $109 for a necklace ($69 + $40). Plating prep uses ultrasonic and steam, so pieces with the sensitive stones above start with the Mail-In Evaluation. Tell us what the stones are when you book; a jeweler confirms the plan on arrival, and if the scope or price changes, you approve it first.
Every repair already includes a clean and polish, so if the piece needs a stone tightened or a clasp replaced anyway, the clean comes with it. Mailing it costs $30 round trip per order by UPS, label ready in your account, with $100 of coverage each way and full value insurable up to $10,000 for 2.5% of the value above $100. We photograph the piece, stones and all, when it reaches our New York studio and again before it goes back. Sky Jewelry, family jewelers on Lenox Avenue since 1989, runs JewelryRepair.com and has done over 50,000 repairs since 1989; a second jeweler checks each piece, and the work carries the 1-year workmanship guarantee.
Questions
Can I use a silver polishing cloth on jewelry with stones?
Can sterling silver with cubic zirconia go in an ultrasonic cleaner?
Is baking soda and foil safe for silver with stones?
How do I clean a sterling silver necklace with diamonds?
Why do the stones in my silver jewelry look cloudy?
How often should I clean silver jewelry with stones?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list