Chains & clasps

Tennis bracelet

Gold rope chain soldered with a fine torch flame on a soldering block

A tennis bracelet is a flexible bracelet made of one continuous line of matching stones, usually diamonds, set in identical settings that are each hinged to the next. A typical one holds round diamonds in four-claw (prong) settings. Made longer, the same design is a tennis necklace.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How a tennis bracelet is built

A tennis bracelet is one unbroken line of stones. It is built from many identical settings, each with its own hinge, and the links between them are riveted or soldered from the sides, which is what lets the line drape around the wrist instead of bending in stiff sections. A typical tennis bracelet holds round diamonds in four-claw prong settings. Diamonds are the classic choice, but the same build is used for colored stones, lab-grown diamonds and cubic zirconia.

Like many bracelets, a tennis bracelet often closes with a box clasp: a folded, springy tongue that snaps into a slot and is released by pressing a small trigger. Ganoksin's bench reference notes that box catches are used frequently on bracelets, and that the figure-eight is the most common style of safety: a small wire loop on the side that holds the clasp together if the trigger is pressed by accident.

How it wears or fails

A tennis bracelet has dozens of moving joints and dozens of settings, and everyday wear finds the weakest one:

  • The clasp tongue loses its spring. Every opening flexes it, and in time it no longer pushes back hard enough to stay locked. The bracelet then opens with a light tug, often without the wearer noticing.
  • The safety catch bends. A figure-eight that has been forced or snagged stops clicking shut, leaving the clasp with no backup.
  • A joint wears through. The small links between settings rub together all day, and the thinnest one eventually breaks.
  • Prongs wear and stones loosen. Bracelets take knocks against desks and door frames, and a worn prong lets a stone rattle, tilt and finally drop out.
  • Kinks. Twisting the line or folding it tightly into a small box strains the joints.

How to tell it needs attention

  • Hold the bracelet near your ear and tap it gently. A faint rattle is a loose stone.
  • Look along the line in good light. A stone that sits lower than its neighbors, tilts, or shows a gap at the prongs is working loose.
  • Close the clasp and pull gently on both ends. If it opens without pressing the lever, the tongue has lost tension.
  • Check that each safety catch clicks over its post and stays closed.
  • Drape the bracelet over a finger. Any link that stays stiff or bent instead of falling freely is worth a look.

If any of these turn up, stop wearing it until it's fixed. A tennis bracelet that opens or drops a stone often does it unnoticed.

Tennis bracelet vs tennis necklace

A tennis necklace is the same line of hinged settings at necklace length, and the extra length changes three things that matter for repair:

  • More settings and joints. Many more stones means many more prongs to wear and links to break, so a loose-stone check takes longer and a necklace can need more than the eight stones Stone Tightening covers per order.
  • More weight on the clasp. Every added stone adds weight, and the clasp and the links beside it carry that load each time the necklace is lifted, put on or caught.
  • A different price path here. Chain Soldering and Chain Shortening have a tennis bracelet option on the repair page; a tennis necklace isn't a menu item, so it starts with a free quote.

The checks are the same for both: listen for rattles, look along the line, and test the clasp and its safety. Before the tennis story caught on, the style was called a diamond line bracelet; the name's history is in the questions below.

What it costs here

JewelryRepair.com repairs tennis bracelets under its chain and stone services, with a tennis bracelet option priced in where the work is harder:

  • A broken link: Chain Soldering, one break, $94 in sterling silver ($30 + $64), $105 in 14K yellow gold ($30 + $7 + $4 + $64), $112 in 14K white ($30 + $14 + $4 + $64) and $197 in platinum ($30 + $103 + $64). A second break adds $17.
  • A clasp that opens: Clasp Replacement repairs the box clasp when it can be saved or fits a new one, soldered on and action-tested: $130 in silver for a small box clasp ($48 + $82), $152 for a small one in 14K yellow and $160 in 14K white.
  • Loose stones: Stone Tightening checks every stone under 10x magnification, from $50 in silver, $55 in yellow gold and $60 in white gold, up to eight stones per order.
  • A missing stone: Diamond Setting matches a new diamond to its neighbors. One side diamond set in 14K yellow gold is $33 ($5 + $9 + $4 + $15), in 14K white $57 ($5 + $33 + $4 + $15) and in silver $20. Small accent stones are matched and set at the listed price; larger stones are photo-quoted for your approval before sourcing. For a colored-stone line, Gemstone Replacement matches and sets a new stone, from $23 for one side stone in silver; for cubic zirconia, start with a free quote or the $19 Mail-In Evaluation. If you still have the stone, Reset Loose Stone is $89 flat; seal it in a small bag in the box.
  • Too long: Chain Shortening removes links at the clasp end and re-solders the clasp: from $108 in sterling silver ($44 + $64) and from $114 in 14K yellow gold ($44 + $6 + $64), plus $5 to $20 for bracelets wider than 1.5mm. A 3mm silver bracelet, for example, is $118 ($44 + $64 + $10). The removed links come back to you.

A safety catch, a tennis necklace or added length isn't a menu item, so those start with a free quote through the contact page or the $19 Mail-In Evaluation, credited in full. Our answer Can a tennis bracelet be repaired? walks through each fix.

If your bracelet is worth more than the $100 of UPS coverage included each way, add full-value coverage when you book: 2.5% of the value above $100 for both directions, which is $60 for a $2,500 bracelet and $122.50 for a $5,000 one, up to $10,000. It travels in a plain box with a signature required both ways, is photographed on arrival at the New York studio and again before it leaves, and a second jeweler checks the work, which carries a 1-year guarantee. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989. Over 50,000 repairs since 1989 have passed through the family's hands.

Prices at a glance

Service Price What's included
Chain Soldering from $94 tennis bracelet One break closed with the tennis bracelet option ($30 + $64 in silver) and finished flush. A second break adds $17; white gold solder jobs include rhodium on the repaired area.
Clasp Replacement from $130 small box clasp, silver Your box clasp repaired when it can be saved, or a new one fitted, soldered on and action-tested. In silver: small $130, medium $140, large $150. A small one in 14K yellow is $152, in 14K white $160.
Stone Tightening from $50 Every stone tested for movement under 10x magnification and the loose ones secured the way their setting needs, up to eight stones per order. Yellow gold $55, white gold $60.
Chain Shortening from $108 tennis bracelet Links removed at the clasp end with the tennis bracelet option and the clasp re-soldered; the removed links are returned. $108 in silver for a 1.5mm line ($44 + $64); wider bracelets add $5 (2mm) to $20 (5mm).
Diamond Setting from $20 one side diamond A missing diamond matched to its neighbors and set. One side diamond is $33 in 14K yellow gold ($5 + $9 + $4 + $15), $57 in 14K white ($5 + $33 + $4 + $15) or $20 in silver. Sourcing is quoted separately; larger stones are photo-quoted, and you approve the stone before it's set.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

How much does it cost to fix a tennis bracelet?
At JewelryRepair.com a broken tennis bracelet is soldered from $94 in sterling silver or $105 in 14K yellow gold, a worn small box clasp is replaced from $130 in silver, and loose stones are tightened from $50. Each price is set on the repair page before you pay, and shipping is $30 round trip by UPS for everything in the box.
Why does my tennis bracelet keep coming open?
Usually the box clasp's tongue has lost its spring, so it no longer locks firmly into the box, and a bent figure-eight safety catch has removed the backup. Stop wearing it until it's fixed. Clasp Replacement repairs the original box clasp or fits a new one, soldered on and action-tested, from $130 in sterling silver at JewelryRepair.com.
Can a tennis bracelet be shortened?
Yes. Links are removed at the clasp end, so the stones people see are untouched, and the clasp is re-soldered to the new end link. At JewelryRepair.com, Chain Shortening with the tennis bracelet option is from $108 in sterling silver and from $114 in 14K yellow gold, plus $5 to $20 for bracelets wider than 1.5mm. The removed links, stones included, come back to you.
Can you add length to a tennis bracelet?
Sometimes, but it isn't a standard menu job, because new links need settings and stones that match the rest of the line. At JewelryRepair.com it starts with a free quote through the contact page or the $19 Mail-In Evaluation, credited in full toward the work. You see the price, with photos, before anything is done, and you can decline with nothing more to pay.
Why is it called a tennis bracelet?
The popular story is that Chris Evert stopped a US Open match to find a diamond line bracelet that had slipped off her wrist. It's often dated to 1987, but according to Mental Floss the term was already in newspapers by the mid-1980s, and Evert's publicist dates the incident to 1978, a year Evert has since embraced. Either way, the name stuck to any flexible line of set stones.
Should I insure a tennis bracelet before mailing it?
Yes, if it's worth more than the $100 of UPS coverage included each way. Full-value coverage costs 2.5% of the value above $100 and covers both directions: $60 for a $2,500 bracelet, $122.50 for a $5,000 one, up to $10,000 per package. It runs from UPS's first scan until the package is signed for, and nothing on the plain box names what's inside.

All glossary terms · Repair questions · How online jewelry repair works

Sources