Jewelry repair questions · Chains, clasps & bracelets

Can a tennis bracelet be resized, shortened or lengthened, and do you get the removed diamonds back?

Yes, a tennis bracelet can be resized smaller: a jeweler takes set links out at the clasp end and refits the clasp, and the removed links come back to you with their stones still set. Lengthening is harder, because it needs links that match yours. At JewelryRepair.com, shortening a tennis bracelet starts at $108 in sterling silver.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$108tennis bracelet shortened, sterling silver ($44 + $64)
$125tennis bracelet shortened, 14K white gold ($44 + $11 + $6 + $64)
1 fingerof room between wrist and bracelet for a good fit (GIA)
50,000+repairs since 1989

The short version

  • Resizing smaller (shortening): yes. Every link of a tennis bracelet holds a stone, so shortening means taking out whole set links. They come out at the clasp end, the clasp is soldered to the new end link, and the bracelet is tested.
  • The removed diamonds are yours. At JewelryRepair.com the removed links come back in the return package, with the stones still in their settings.
  • Making it bigger (lengthening): sometimes. It needs links that match yours in metal, size, setting and stone. Links taken out in an earlier shortening are the easy answer; new matching links are custom work.
  • Measure before anything is cut. GIA's rule for fit is room for one finger between wrist and bracelet. Give the finished length you want in your order.
  • Price here: Chain Shortening with the tennis bracelet option is $108 in sterling silver, $114 in 14K yellow gold and $125 in 14K white gold.

Prices

Service PriceWhat's included
Chain Shortening from $108 tennis bracelet, sterling silver
from $125 tennis bracelet, 14K white gold
from $192 tennis bracelet, platinum
Set links removed at the clasp end, the clasp soldered to the new end link, tested and polished; the removed links come back in the return package, stones still set. 14K yellow gold $114, 14K white gold $125, platinum $192.
Clasp Replacement from $130 small box clasp, silver
from $160 small box clasp, 14K white gold
A worn box clasp replaced with one sized to the bracelet and soldered on, or the original repaired when it's salvageable. A small 14K white gold box clasp is $160.
Stone Tightening from $50Loose stones tightened under 10x magnification, up to eight stones per order; white gold adds $10.
Custom Work & Modifications $10Lengthening with matching set links, reattaching links you kept, or turning removed links into another piece: a jeweler quotes from your photos before anything ships.
Mail-In Evaluation $19The whole bracelet examined under magnification, with an itemized quote and photos, when you'd rather the bench see it in hand.

How a tennis bracelet is built, and why that changes sizing

GIA describes a tennis bracelet as a flexible band featuring a continuous line of individually set diamonds or gemstones, held in prong, bezel or channel settings. Wikipedia's bracelet article adds how it moves: many identical settings, each with a hinge, linked so the line flexes around the wrist, with the links usually riveted or soldered from the sides. It also notes that a tennis bracelet is adjusted to fit by removing links, a job for a jeweler.

That construction is what separates a tennis bracelet from a chain. Shortening a cable or rope chain removes plain metal. Shortening a tennis bracelet removes stones, because there is no plain section to take out. It also explains why lengthening is hard: a chain can be extended with more links of the same wire, but a tennis bracelet can only be extended with links that hold matching stones in matching settings, or the new section shows.

The clasp matters as much as the length. Many tennis bracelets close with a box clasp, a tongue that clicks into a housing; GIA notes that tennis bracelets often have safety latches as well and advises choosing a reliable clasp. GIA's history of the name is a clasp story too: at the 1987 U.S. Open, Chris Evert stopped play to look for her diamond bracelet after its clasp broke. A bracelet that's too loose slides over the hand and knocks into more things, which is a good reason to have it sized rather than put up with it.

How a jeweler shortens a tennis bracelet

  • Photographed on arrival. At the New York studio of JewelryRepair.com, the bracelet is photographed the day it arrives, before anything else, recording every stone and its condition. The photos appear in your account.
  • Measured twice. The jeweler checks the current length against the finished length you asked for and works out how many links that means.
  • Links come out at the clasp end, so the front of the bracelet, the part people see, stays original. On a graduated bracelet, with larger stones toward the center, the links that come out are the ones nearest the clasp.
  • The clasp is refitted. It is soldered to the new end link, tested, and the joint polished out. On white gold, solder work includes rhodium re-plating of the repaired area. If your bracelet has a side safety catch, mention it in your order note.
  • Checked and photographed again. A bench jeweler does the work, a second jeweler checks it, and the bracelet is photographed again before it ships back, with the removed links in the same package.

Do you get the removed diamonds back?

Yes. The removed links are your metal and your stones, and at JewelryRepair.com they come back in the return package with the stones still in their settings. The intake and outgoing photos in your account let you match the bracelet, and the links, to what you sent.

What to do with them:

  • Keep them with the bracelet. If your wrist size changes, or the bracelet passes to someone else, the original links are the easiest way to add length back, because they match exactly.
  • Put them to use. A few set links can become part of another piece, such as a pendant or a pair of earrings. That starts with the $10 Custom Work estimate, and existing stones or gold can be reused or credited.
  • Update your insurance. If the bracelet is scheduled on a policy, tell the insurer it was shortened. An updated Jewelry Appraisal, from $105, documents the bracelet as it is now.

Lengthening: what's possible

Adding length means adding links, and every added link has to match: the same metal and color, the same link size and hinge, the same setting style, and stones of the same size, color and quality set at the same height. In a continuous line of stones, a mismatch is easy to see.

  • You kept the removed links: the simplest case, because they match exactly and go back where they came from, at the clasp end.
  • You need new links: matching settings have to be found or made, and stones matched to fill them. Whether it can be done depends on the bracelet, so it's priced by quote, never promised in advance.
  • You need very little: check the fit first. A bracelet that only feels snug may already be at the one-finger fit GIA recommends.

At JewelryRepair.com, Chain Lengthening is listed for chains, not tennis bracelets, so lengthening a tennis bracelet starts with the $10 Custom Work estimate: send photos and the length you need, a jeweler reviews them and sends a quote line by line, and nothing ships until you've seen it. If you'd rather the bench examine the bracelet in hand, the $19 Mail-In Evaluation is credited in full toward the work.

Working out the length you need

  • Measure the bracelet lying flat, end to end, clasp included.
  • Measure a bracelet that fits well the same way, or wrap a strip of paper around your wrist where the bracelet sits and mark where it overlaps.
  • Allow for fit. GIA says a tennis bracelet should fit comfortably and snugly, with room for one finger between wrist and bracelet. A paper-strip measurement of your bare wrist needs that allowance added; a bracelet that already fits well doesn't.
  • Count links per inch. Count the links in one inch of your bracelet: that's how many links each inch of shortening removes. The bracelet can only change by whole links, so the finished length lands on the nearest link.
  • Write the finished length in your order note, and say that it's measured with the clasp.

Before you shorten it: warranties, clasps and stones

  • Under a maker's or seller's warranty or care plan? Check with the maker or seller first, because outside work can void that coverage, and some size bracelets themselves.
  • A clasp that doesn't click shut firmly, or a worn box clasp tongue: replace it while the bracelet is being sized. A small silver box clasp is $130 on Clasp Replacement ($48 + $82), or $160 in 14K white gold ($48 + $82 + $30).
  • Loose stones. Hold the bracelet near your ear and tap it gently; a faint rattle means a loose stone. Stone Tightening starts at $50 and covers up to eight stones per order.
  • No safety catch? See whether a jeweler can add a safety chain to a bracelet.
  • Rather not cut it? See how to shorten a necklace or bracelet without cutting it.

What it costs at JewelryRepair.com

Prices from the live Chain Shortening page, Nov 18, 2026, with the tennis bracelet option (+$64). Each includes a clean and polish and the 1-year workmanship guarantee, and the configurator shows the exact total before checkout.

  • Sterling silver: $108 ($44 + $64).
  • Yellow gold: $108 in 10K, $114 in 14K ($44 + $6 + $64), $118 in 18K ($44 + $10 + $64).
  • White or rose gold: $119 in 10K ($44 + $11 + $64), $125 in 14K ($44 + $11 + $6 + $64), $129 in 18K ($44 + $11 + $10 + $64).
  • Platinum: $192 ($44 + $84 + $64).
  • Chain thickness: the configurator also asks the chain thickness (for a tennis bracelet, its width); 2.0mm adds $5, 3.0mm $10, 4.0mm $15 and 5.0mm $20, so a 4mm bracelet in 14K white gold is $140 ($125 + $15).
  • Rush: +$50 ships it back 2 to 3 days sooner.
  • Lengthening: by quote, starting with the $10 Custom Work estimate.

Shipping is $30 round trip per order by UPS. The prepaid label is ready in your account minutes after checkout; close the clasp, seal the bracelet in a small bag, pad it in any sturdy small box with nothing on the outside naming the contents, and drop it at any UPS location. $100 of coverage is included each way. For a diamond bracelet, add full-value coverage before checkout: 2.5% of the value above $100, one fee for both directions, up to $10,000 per package, so a $5,000 bracelet costs $122.50 to cover. Coverage runs from UPS's first scan until the package is signed for, with a signature at both ends. JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Questions

Can a tennis bracelet be resized?
Yes, smaller is the usual resize: a jeweler removes whole set links at the clasp end and refits the clasp, and the removed links come back to you with their stones. Making one bigger needs links that match, so it is quoted case by case. At JewelryRepair.com, resizing a tennis bracelet smaller on Chain Shortening starts at $108 in sterling silver and $125 in 14K white gold.
My tennis bracelet is too big. What can I do?
Have it shortened by whole links rather than living with it, because a loose tennis bracelet slides over the hand and takes more knocks. Measure a bracelet that fits well, end to end with the clasp, and give that finished length in your order. GIA's fit guide is room for one finger between wrist and bracelet. If the clasp is worn, replace it at the same time; a small silver box clasp is $130.
How much does it cost to shorten a tennis bracelet?
At JewelryRepair.com, shortening a tennis bracelet is $108 in sterling silver, $114 in 14K yellow gold, $125 in 14K white gold and $192 in platinum, booked on Chain Shortening with the tennis bracelet option (+$64). A chain thickness (bracelet width) of 2.0mm to 5.0mm adds $5 to $20. The price covers refitting the clasp, a clean and polish and a 1-year workmanship guarantee; shipping is $30 round trip per order.
Do I get my diamonds back when a tennis bracelet is shortened?
Yes. The links removed from a tennis bracelet still hold their stones, and at JewelryRepair.com they come back to you in the return package, because that metal and those stones are yours. The bracelet is photographed on arrival and again before it ships, so you can compare. Keep the links with the bracelet: they're the easiest way to add length back later.
Can you add links to a tennis bracelet?
Sometimes, but only with links that match. Each added link needs the same metal, link size, setting style and stone size and quality as the rest, or the new section shows. Links removed in an earlier shortening match perfectly. New links are custom work: at JewelryRepair.com that starts with a $10 Custom Work estimate from your photos, or a $19 Mail-In Evaluation, credited in full, if the bench should see the bracelet in hand.
Will shortening my tennis bracelet affect its warranty?
It can. If the bracelet is covered by a maker's or seller's warranty or care plan, check with the maker or seller before any outside work, because work done elsewhere can void that coverage, and some size bracelets themselves. Without that kind of coverage, a shortening at JewelryRepair.com carries its own 1-year workmanship guarantee from the day the bracelet is delivered back to you.