Jewelry repair questions · Chains, clasps & bracelets
How tight should a bracelet be, and how do I measure my wrist before having one resized?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Chain, link and tennis bracelets: one finger should slide between the bracelet and your wrist, the test Jewelers Mutual gives for chain and tennis styles.
- In inches: your wrist plus 1/4 to 1/2 inch for snug, 3/4 to 1 inch for comfortable.
- Cuffs match your wrist measurement; bangles have to pass over your knuckles, and Jewelers Mutual suggests room for at least two fingers.
- Too loose shows: the clasp keeps working around your wrist, or the bracelet slides onto your hand.
- Fixing it by mail: Link Removal & Addition is $19 for one link, Chain Shortening starts at $44 and Chain Lengthening at $54.
Prices
| Service | Price | What's included |
|---|---|---|
| Link Removal & Addition | from $19 | For link bracelets and metal watch bands: links taken out evenly from both sides of the clasp so it stays centered, pins or screws re-secured, and the removed links returned to you. Rush +$50. |
| Chain Shortening | from $44 | For chain and tennis bracelets: links removed at the clasp end so the front stays original, the clasp re-soldered and tested, removed links returned. 14K +$6, white or rose gold +$11, Cuban +$38, tennis bracelet +$64. |
| Chain Lengthening | from $54 | Matching links added at the clasp end of a chain bracelet, so the join sits under the wrist. 14K +$6, cable +$5, box +$10; thickness 2 mm +$10, rising $10 per mm to +$40 at 5 mm. |
| Mail-In Evaluation | $19 | For bangles, cuffs, tennis bracelets that need to be longer, or anything that doesn't fit a listed service: examined under magnification, photographed and quoted, credited in full toward the work you approve. |
How to measure your wrist, and the bracelet you already own
You need a soft tape measure, or a strip of paper, string or dental floss and a ruler.
- Wrap it snugly around the broadest part of your wrist, as Jewelers Mutual puts it, against the skin but not pulled tight.
- Mark where the ends meet and read the length off the ruler. Measure twice.
- Add the allowance for the fit you like: 1/4 to 1/2 inch for snug, 3/4 to 1 inch for comfortable.
A worked example: a 6 1/2-inch wrist plus 3/4 inch is 7 1/4 inches for a comfortable fit. Jewelers Mutual calls 7 inches the standard bracelet length, so a standard bracelet on that wrist leaves 1/2 inch of room, a snug fit, and on a 7-inch wrist it would leave none.
A bracelet you already own that fits the way you like is often the better guide. Unclasp it, lay it flat and measure end to end, clasp included; that finished length is the number to ask for.
Bangles are measured around the hand. Fold your fingers together, tuck your thumb toward your little finger, and wrap the tape around the widest part, across the knuckles. Bangle sizes are often given as an inside diameter, the circumference divided by 3.14: a hand that measures 8 inches around needs a bangle at least 2.55 inches across inside (8 ÷ 3.14), about 65 mm (2.55 × 25.4 = 64.8).
How each style should fit
- Chain bracelets should drape with one finger of room and never slip over the hand. Worn too tight, every bend of the wrist pulls on the clasp and the links beside it.
- Tennis bracelets need a little movement too: Jewelers Mutual's test is one finger between the bracelet and your wrist. Too tight and the links flex hard against each other; too loose and the bracelet swings, knocking its stones against desks and doorframes, which is hard on the small prongs that hold them. If yours has a safety catch beside the clasp, close it every time.
- Link bracelets and metal watch bands should sit snug enough that the clasp stays centered under the wrist. At JewelryRepair.com, links come out evenly from both sides of the clasp for exactly that reason.
- Charm bracelets usually want the looser end of the range, since charms that hang inside the bracelet take up room against the wrist.
- Cuffs have no clasp to adjust. Jewelers Mutual matches them to the wrist, a 7-inch cuff for a 7-inch wrist, worn above the wrist bone.
- Bangles are always loose on the wrist, because they must pass over the knuckles. Jewelers Mutual says a bangle should fit at least two fingers between it and your wrist; the right one is the smallest that slips on without force.
- Pearl and bead bracelets change length only when restrung; see whether a pearl strand can be shortened or lengthened.
Signs your bracelet doesn't fit
- The clasp keeps working its way around your wrist. A bracelet with slack turns freely, and its heaviest part, the clasp or a charm, drifts wherever gravity pulls it. Taking out the slack fixes this far more often than a new clasp does.
- It slides past the wrist bone onto your hand when your arm hangs down.
- It leaves a mark, pinches, or catches hairs when you bend your wrist; see why a bracelet pinches or pulls hair.
- You can't get a finger under it, or it only closes with effort.
- A watch slides round to the side of your wrist instead of staying on top, which on a metal band often means the band is too loose.
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026. Each repair includes a clean and polish and the 1-year workmanship guarantee.
- Link bracelet or metal watch band, most brands: one link $19 ($5 + $14), two or more $29 ($5 + $24), removed links returned. A few watch brands carry a surcharge, shown on the repair page.
- Chain bracelet: Chain Shortening takes links off at the clasp end and re-solders the clasp: sterling silver or 10K yellow gold $44; 14K yellow gold $50 ($44 + $6); 14K white gold $61 ($44 + $11 + $6).
- Patterned and tennis bracelets: a 5 mm Cuban link bracelet in 14K yellow gold is $108 ($44 + $6 + $38 + $20); a 14K white gold tennis bracelet is $125 ($44 + $11 + $6 + $64).
- Too short: Chain Lengthening adds matching links at the clasp end; a 2 mm cable bracelet in 14K yellow gold is $75 ($54 + $6 + $5 + $10).
Not sure which fits? The $19 Mail-In Evaluation is credited in full toward approved work, and a free quote through the on-site chat or the contact page comes back within 1 business day.
When a bracelet can't simply be made shorter or longer
- Solid bangles and closed cuffs have no links to take out. Bangle Reshaping, from $85, brings a bent bangle back to round, but making one a different size isn't a listed service. See whether a bangle or cuff can be resized, and start with the $19 evaluation.
- Lengthening a tennis bracelet means adding links with matching stones, which isn't a listed service; shortening one is. See changing a tennis bracelet's length.
- Adding links to a link bracelet needs links that match. If you kept the ones taken out earlier, send them with the bracelet; otherwise ask for a quote before you order.
- Elastic bead bracelets are restrung rather than resized, and any bracelet can be shortened without cutting for now.
Before you ship
- Write down two numbers in the order notes: your wrist measurement and the finished length you want, end to end with the clasp. For a watch band, send the whole watch.
- Shipping is $30 round trip per order by UPS, so a bracelet and a watch can share the box. $100 of coverage is included each way; covering a $1,500 tennis bracelet in full costs $35 (2.5% of the $1,400 above $100), one fee for both directions.
JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989. Your bracelet is photographed on arrival at the New York studio and again before it ships back; a bench jeweler does the work and a second jeweler checks it.
Questions
How much room should there be between a bracelet and your wrist?
Should a tennis bracelet be loose or tight?
Why does my bracelet keep flipping or turning around?
How do I measure my wrist without a tape measure?
How tight should a bangle be?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list