Watches

Watch links

Jeweler adjusting the links of a gold bracelet at the bench with pliers

Watch links are the individual segments of a metal watch bracelet, joined to one another by small pins, screws or pin-and-collar fittings. Taking links out or putting them back changes the bracelet's length, which is how a metal watch band is sized to a wrist; the link at each end attaches to the case.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How watch links fit together

A metal watch bracelet is a chain of links. Each one is joined to the next by a pin running crosswise through it, and the number of links sets the bracelet's length. The end link at each side is shaped to meet the case and is usually held between the lugs by a spring bar.

Links are joined in three main ways, and each comes apart differently:

  • Friction pins (push pins). A smooth pin is pressed through the link and held by a tight fit. Many bracelets have small arrows on the back of the links showing which way each pin pushes out; some pins only come out one way, and where there are no arrows they usually go either way.
  • Screws. A threaded pin with a slotted head screws into the link. It needs a fine screwdriver, not a pin pusher, and a screw that has backed out leaves the link loose.
  • Pin and collar. A plain pin is gripped by a collar, a tiny hollow tube seated in the link, and the joint won't hold if the collar goes missing.

Some bracelets with folded links use L-shaped pins instead of straight ones, so check the pin shape before pushing.

Sizing a bracelet: how many links to take out

A bracelet is sized by removing or adding links, and how it's done decides how the watch wears:

  • Take links evenly from both sides of the clasp. If they all come from one side, the clasp slides off-center and the watch head sits crooked. When an odd number has to come out, take the extra one from whichever side keeps the clasp under the middle of your wrist.
  • Check a pre-owned bracelet first. One that has been sized before may already have a long side and a short side, so count from where the clasp sits now, not from an even split of what's left.
  • Fine-tune at the clasp. When the fit lands between two links, a clasp with micro-adjustment holes lets you move it a few holes without touching the links (see deployant clasp).
  • Keep the removed links. They're the only exact match if you want the bracelet loosened later or you sell the watch.

How links wear or fail

Each link pivots on its pin every time your wrist moves, so wear builds up at the joints rather than on the surface:

  • Stretch. As pins and pin holes wear, each joint gains a little play. Across a whole bracelet that adds up to a band that sags, rattles and hangs looser than it was sized.
  • A pin working out. A one-way pin refitted the wrong way round, a lost collar or a loosened screw can creep out until a link separates.
  • Grime in the joints. Sweat, skin oil and old polish residue build up inside the links, stiffening the bracelet and adding to the wear. Watch Cleaning & Detail ($185 for most brands) takes the bracelet off the case, cleans the links ultrasonically and finishes them by hand, without opening the case back.
  • Damaged pin holes. Forcing a screw pin, prying at a collar or pushing a pin against its arrow can scratch the links or wear the pin holes oversized, after which no pin sits tight.

Signs to act on: a pin end standing proud of the edge of a link, a link that flexes sideways, a click at one joint, or a bracelet that suddenly feels longer. If a pin is backing out, stop wearing the watch until it's fixed.

Watch links vs spring bars

The two hold different joints. Link pins join the links of a bracelet to each other, and they set its length. A spring bar is the spring-loaded rod that holds the end of the bracelet, or a strap, between the lugs of the case. If the bracelet is too loose, that's a link job. If the whole bracelet came away from the case, look at the spring bar and the lug holes first.

The clasp is a third, separate part: a deployant clasp that opens by itself has lost its closing tension, and taking out a link won't fix it. Leather and rubber straps have no links: they're sized by the holes in the strap, and a worn or broken one is Watch Band & Strap Repair ($45 rubber, $120 leather for most brands).

What it costs here

Link Removal & Addition is $19 for one link or $29 for two or more with most brands ($5 base plus $14 or $24). Patek Philippe adds $10 ($29 / $39) and Rolex adds $20 ($39 / $49). The jeweler works out how your links are joined before touching a pin, takes them out evenly from both sides of the clasp and re-secures the bracelet, and the removed links come back in the box with your watch. The repair page prices removals only, so if links are going back in, ask for a free quote through the on-site chat or the contact page before you book. Rush (+$50) ships it back 2 to 3 days sooner.

A bracelet that has stretched, lost a pin or won't stay together is Watch Band & Strap Repair: $95 for a metal band with most brands ($45 + $50) and $195 for Rolex, with worn pins and collars replaced, loose links re-pinned and the clasp re-tensioned. A cracked or missing link isn't a listed repair, so we don't promise a match sight unseen; it starts with the Mail-In Evaluation, $19 and credited in full toward the repair, with photos and an itemized quote before any work.

If the watch is still under the maker's warranty or a service plan, check with the maker first, because outside service can void it. JewelryRepair.com is independent, not affiliated with, authorized by or endorsed by any watch brand. Shipping is $30 round trip by UPS. The bench belongs to Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Link Removal & Addition $19 one link
$29 two or more
The jeweler identifies how the links are joined, takes them out evenly on both sides of the clasp so it stays centered, and re-secures the pins; the removed links are returned. Patek Philippe adds $10 and Rolex $20. Rush +$50.
Watch Band & Strap Repair $95 metal For a bracelet that has stretched or lost a pin: worn pins and collars replaced, loose links tightened or re-pinned, and the clasp re-tensioned. Rolex adds $100. A replacement is quoted if a band can't be saved.
Mail-In Evaluation $19 For a cracked or missing link, or a bracelet problem you can't name: examined under magnification, with an itemized quote and photos before any work. The $19 is credited in full toward the repair.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

How much does it cost to remove links from a watch?
At JewelryRepair.com, Link Removal & Addition is $19 for one link or $29 for two or more with most brands; Patek Philippe adds $10 and Rolex $20. Links come out evenly on both sides of the clasp so it stays centered, and the removed links are returned. Round-trip UPS shipping is $30 per order, the same however many pieces are in the box.
How many links should I take out of my watch?
Enough that the watch sits snugly without pinching, with the clasp centered under your wrist. Put it on, let the bracelet hang and pinch the slack together underneath: the links in the pinch are roughly how many to remove. Take them evenly from both sides of the clasp, and if the fit lands between two links, use the clasp's micro-adjustment holes if it has them.
Which way do you push out a watch link pin?
In the direction of the arrows on the back of the link. Many bracelets mark the way each pin comes out, and pushing a one-way pin against its arrow can jam or damage it. With no arrows, the pins usually go either way. A slotted head means it's a screw that has to be unscrewed, and a pin-and-collar joint can drop its tiny collar, so work over a tray.
Can you add links back to a watch band?
Yes, if you still have the original links. Link Removal & Addition covers it, but its repair page prices removals only, so ask JewelryRepair.com for a free quote through the on-site chat or the contact page before you book; a jeweler replies with an itemized price within 1 business day. If the spare links are lost, a matching link isn't a listed service, so start with the $19 Mail-In Evaluation, credited in full toward any repair you approve.
Why is my watch bracelet loose when I haven't changed the links?
Most likely it has stretched. Every pin and pin hole wears a little, and across many joints that play adds up to a looser bracelet. A pin working its way out can do it too, so check each joint. Watch Band & Strap Repair for a metal bracelet replaces worn pins and collars, re-pins loose links and re-tensions the clasp: $95 for most brands at JewelryRepair.com, $195 for Rolex.
Will removing links scratch my watch bracelet?
It shouldn't, when the right tool is used on the right system. Scratched links and oversized pin holes usually come from hammering a screw pin, prying at a collar or forcing a pin against its arrow. At JewelryRepair.com a jeweler identifies how the links are joined before removing anything, the watch is photographed on arrival and before it ships back, and a second jeweler checks the work.

All glossary terms · Repair questions · How online jewelry repair works

Sources