Watches
Spring bar
A spring bar, the part many people call a watch band pin, is the small spring-loaded rod that holds a watch strap or bracelet to the case. It is a hollow tube with a coil spring inside and a retractable pin at each end; the tips seat in holes in the lugs.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How a spring bar works
A spring bar is a short metal tube with a coil spring inside and a sliding pin at each end. The spring pushes both pins outward. To fit a strap, the bar goes through the loop at the end of the strap, one pin is set into the hole drilled in one lug, and the other pin is pressed in until it lines up with the opposite hole and snaps out into it. The bar's length matches the watch's lug width: the gap between the lugs, in millimeters, which you can measure or find in the maker's specifications.
The types you'll meet:
- Flanged (shouldered) bars have one or two small flanges near each tip, which give a spring bar tool something to push against. Most watches use them.
- Shoulderless bars are made for lugs drilled straight through, where the pin is pushed in from the outside.
- Quick-release bars add a tiny lever, so a strap can be swapped by hand with no tool.
- Thicker ("fat") bars are made to be extra robust; the strap's loop and the lug holes have to be sized to take them.
- Curved bars leave extra room between the case and the bar for a thick strap.
Why spring bars fail
A good bar is strong: aBlogToWatch's spring-bar guide puts a quality Swiss bar, fitted correctly, at over 50 pounds of pressure. So when a watch comes in after a strap let go, the bench jeweler looks at three things together, the bar, the lug holes and the strap end, because even a strong bar can let go when the fit between them is wrong.
- The tips. A pin narrower than its lug hole leaves a gap, and a gap gives a knock room to unseat it.
- The spring. A spring that isn't stainless steel can rust inside the tube and lose its push; the same guide recommends 304L or 316L stainless.
- Quick-release hardware. Handy for swapping straps, but the guide points out that these bars are often made in a single tip size with lighter springs, and a bar that turns in its holes can wear them.
- The lug holes. A hole worn oversize won't hold even a new bar of the right length snugly.
- The strap end. Leather almost always gives way at the spring-bar hole, and rubber cracks there too, so the bar can be fine while the strap fails around it.
Signs a spring bar needs attention
- The strap shifts or clicks side to side where it meets the case. Hold the watch and push the strap end gently left and right: any movement or click means a gap at the tip.
- One end of the strap sits crooked or lower than the other.
- You can see a pin only just reaching into its lug hole.
- The bar looks bent, or there's rust at the tips.
- Leather is cracking or stretching around the bar, or a rubber strap shows splits at the end.
Any of these is worth dealing with now. A bar with play can let go with one knock, so don't wait for it to get worse. Our answer on replacing a watch band pin covers when it's a quick swap.
Spring bar vs watch links
A spring bar attaches a strap or bracelet to the case. Watch links are the segments of a metal bracelet, and they are joined to each other by their own pins: friction pins, screws or pin-and-collar systems. If a bracelet is too loose, that's a link job, not a spring bar job. Link Removal & Addition takes links out evenly on both sides of the clasp so it stays centered on your wrist, $19 for one link and $29 for two or more on most brands (Rolex adds $20, Patek Philippe $10), and the removed links come back to you. Our answer on removing links from a watch band explains the pin systems. A deployant clasp is a third, separate part: the folding buckle that opens and closes the band.
What it costs here
JewelryRepair.com doesn't list a spring bar on its own; a bar by itself is a part many owners change at home with a spring bar tool. When the trouble is the band, it's Watch Band & Strap Repair, for watch bands only. Prices for most brands:
- Rubber: $45, repaired where the material allows.
- Metal bracelet: $95 ($45 + $50). Worn pins and collars replaced, loose links re-pinned, the clasp re-tensioned.
- Leather: $120 ($45 + $75). Failed seams restitched and the strap reinforced at the spring-bar holes.
Rolex adds $100: $145 rubber, $195 metal, $220 leather. If a band can't be saved, a replacement is quoted first. If you can't tell whether the bar, the strap or the lug hole is at fault, book the Mail-In Evaluation: $19, credited in full toward the repair, with photos and an itemized quote before any work. If the watch is still under its maker's warranty, check with the maker first, because outside service can void it.
Shipping is $30 round trip per order by UPS, with $100 of coverage included each way and full-value coverage available up to $10,000 for 2.5% of the value above $100. The watch is photographed when it reaches the New York studio and again before it goes back, and a second jeweler checks the bench jeweler's work, which carries a 1-year guarantee. JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989; the family counts over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Watch Band & Strap Repair | from $45 | Watch bands, not ring bands: rubber $45, metal $95, leather $120 for most brands; Rolex adds $100. Leather is restitched and reinforced at the spring-bar holes; metal bracelets get worn pins and collars replaced and the clasp re-tensioned. A replacement is quoted if a band can't be saved. |
| Link Removal & Addition | from $19 | Links taken out evenly on both sides of the clasp of a metal watch band or link bracelet, so the clasp stays centered; the removed links are returned. Two or more links: $29 for most brands; Rolex adds $20, Patek Philippe $10. |
| Mail-In Evaluation | $19 | A jeweler photographs the watch, checks the bars, strap ends and lugs under magnification and sends an itemized quote. The $19 is credited in full toward the repair. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
What size spring bar do I need?
How do you know if a spring bar is bad?
Why did my watch strap fall off?
Are quick-release spring bars safe?
Can a leather strap that tore at the spring bar be repaired?
See also
All glossary terms · Repair questions · How online jewelry repair works