Metals & plating

Stainless steel

Jeweler adjusting the links of a gold bracelet at the bench with pliers

Stainless steel is an iron alloy with at least 10.5% chromium, which forms a thin, self-repairing oxide layer that stops rust. Jewelry and watch cases are commonly made from grade 316L, which adds nickel and molybdenum. It doesn't tarnish the way silver does, but it scratches, and at the bench it's priced as its own metal.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What stainless steel is

Stainless steel is iron alloyed with chromium, and the line is drawn at 10.5%. At that level the chromium reacts with oxygen to form a thin passive layer on the surface, and that layer is what keeps the steel from rusting. It also repairs itself: when the surface is scratched, the exposed metal meets oxygen and the layer forms again.

Two grades cover most of what you'll see in jewelry and watches:

  • 304, also called 18/8, the most common grade of stainless steel, with 18% chromium.
  • 316L, with 16 to 18% chromium, about 10 to 14% nickel (the ASTM A240 limits) and 2 to 3% molybdenum. The L marks the low-carbon version of 316, which protects it from corrosion at welds and heated areas, and the molybdenum gives it better resistance than 304 to attack by chlorides. Its uses include jewelry and watch cases, dive watches especially.

Both are austenitic grades, which are usually non-magnetic, although bending or working them can make them slightly magnetic. Other families of stainless steel are magnetic, so a magnet is not a reliable way to tell whether something is steel.

How it wears

Solid stainless steel won't darken like sterling silver, and water by itself won't rust it as it would ordinary steel, so rain, handwashing or a shower won't harm the metal itself. Our answer on whether stainless steel jewelry tarnishes covers showering and swimming in more detail. What steel does do:

  • Pits where chlorides sit. Localized corrosion, such as pitting and crevice corrosion, is most common where chloride ions are present, so salt water and salty sweat drying on the piece are the problem, not water itself. Rinse and dry steel after the beach, and watch the gaps between bracelet links and under a clasp, where moisture lingers.
  • Scratches. A mirror-polished steel band or watch case shows every scuff, and a brushed finish hides them better. Polishing takes them out, and a brushed surface is restored as a brushed surface rather than buffed to a shine.
  • Coatings wear through. Most gold-tone and black steel jewelry is coated, and the color wears first where the piece rubs: edges, clasps and the underside of a ring. Polishing removes the coating along with the scratches.

For sensitive skin, the alloy matters. The American Academy of Dermatology lists surgical-grade stainless steel among the metals to choose if you have a nickel allergy, but surgical steel has no formal definition, and 316L itself contains nickel, so ask the seller for the exact alloy. The AAD estimates that more than 18% of people in North America are allergic to nickel, and names earrings, earring backs and watches as some of the biggest culprits.

Why it matters for repairs

Steel behaves differently at the bench from gold and silver, and that shows up in three places:

  • It has its own price. On our repair pages, stainless steel is a separate metal choice with its own charge: +$58 on Ring Resizing, +$18 on Chain Soldering and +$20 on Jewelry Polishing, where sterling silver adds nothing. If you start from the Start a Repair wizard instead, it sends solder work on steel to a free quote rather than a set price.
  • Watch bracelets are mechanical. Steel links are held by friction pins, screws or pin-and-collar systems, and the wrong technique for the system is how a band comes back scratched or with stretched pin holes. Link Removal & Addition identifies the system first and takes links evenly from both sides of the clasp so it stays centered.
  • Plating needs help. Stainless steel resists plating, so before Gold Plating it gets an underlayer first. A coating applied by PVD, a different process from electroplating, isn't a set-price job here; it starts with the Mail-In Evaluation, $19 and credited in full toward the repair.

Stainless steel vs sterling silver

The two look alike in a jewelry box, bright and grayish white, but they're different metals with different care and different repair prices.

  • Marks. The FTC says the words sterling and sterling silver describe products that are 92.5% pure silver, and silver is sometimes marked 925, so a 925 stamp points to sterling.
  • Tarnish. Sterling darkens over time and comes back with polishing; steel stays bright but can pit in salt water.
  • Magnets. Not a reliable test, because the austenitic grades used in jewelry are usually non-magnetic, just like silver.
  • Repair price. On most of our repair pages sterling silver is the base price and stainless steel adds a charge, so booking the right metal matters.

If a piece is unmarked and you can't tell, choose Other / not sure on the repair page and the metal is tested at no charge within the repair, or book Metal Testing & Verification ($15 per item) on its own.

What it costs here

Prices for stainless steel from the live repair pages, Nov 18, 2026:

Steel pieces go to the same New York bench at Sky Jewelry as gold and platinum, with over 50,000 repairs since 1989 behind it.

Prices at a glance

Service Price What's included
Ring Resizing from $103 size down
from $108 size up
Cut, fitted with sizing stock, soldered, polished and stone-checked. Each extra full size up adds $35; bands 4mm and wider add $46.
Link Removal & Addition from $19 one link
from $29 two or more
Metal watch bands and link bracelets: the pin, screw or pin-and-collar system identified first, links taken evenly from both sides of the clasp, removed links returned.
Jewelry Polishing from $50 stainless ring Machine and hand polishing to a mirror, satin or brushed finish. A stainless bracelet or anklet is $70.
Chain Soldering from $48 stainless, one break The break rejoined and finished flush. Two breaks +$17; hollow chain +$20.
Watch Cleaning & Detail from $185 Bracelet separated from the case, links ultrasonically cleaned and hand-detailed with brushes and steam; brushed and polished surfaces each kept as they were. The case back stays sealed.
Gold Plating from $211 stainless ring Steel resists plating, so it gets an underlayer before the gold. Flash thickness included; thicker layers cost more.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

How much does it cost to resize a stainless steel ring?
At JewelryRepair.com, $103 to size a plain stainless steel band down and $108 to size it up one size, with each extra full size up adding $35 and bands 4mm and wider adding $46. If you'd rather not cut it, Ring Sizing Beads in steel are $70 for a ring that's too loose. A band with an inlay or a coating starts with the $19 Mail-In Evaluation, credited in full toward the repair.
Can a stainless steel watch bracelet be shortened?
Yes. Link Removal & Addition costs $19 to take out one link or $29 for two or more on most brands. Steel watch links are held by friction pins, screws or a pin-and-collar system, and the jeweler works out which before touching the band, then removes links in equal numbers from each side of the clasp so it sits in the middle of your wrist. The spare links come back to you. Worn pins or loose links are Watch Band & Strap Repair, $95 for a metal band.
Is stainless steel jewelry safe if I'm allergic to nickel?
It depends on the alloy. The American Academy of Dermatology lists surgical-grade stainless steel among the metals to choose with a nickel allergy, but surgical steel has no formal definition, and 316L, a common jewelry steel, contains about 10 to 14% nickel under the ASTM A240 limits. Ask the seller for the exact alloy, and if a steel piece still bothers your skin, stop wearing it and ask a dermatologist.
Can a broken stainless steel chain be fixed?
Yes. Chain Soldering on solid stainless steel is $48 for one break on our repair page, a second break adds $17, and a stainless jump ring is $34 to solder closed or replace. If you aren't sure the chain is solid steel, ask for a free quote through the on-site chat or the contact form before you ship. A gold-tone or black coated chain starts with the $19 Mail-In Evaluation, because heat and polishing affect the coating.
How can I tell if my jewelry is stainless steel or silver?
Look for a mark first: the FTC says sterling describes 92.5% pure silver, and sterling is sometimes marked 925. Sterling darkens over time while solid steel stays bright. A magnet won't settle it, because the austenitic steels used in jewelry are usually non-magnetic. If it's unmarked, Metal Testing & Verification is $15 per item, or the metal is tested free within a repair when you choose Other / not sure.

All glossary terms · Repair questions · How online jewelry repair works

Sources