Metals & plating

Titanium

Gold wedding band in an engraving vise with script engraving inside

Titanium is a light, strong metal, about 4.5 grams per cubic centimeter, used for rings, watch cases and piercings because it resists corrosion and is hypoallergenic. A thin oxide layer protects its surface and can be anodized into colors. It isn't joined with ordinary gold solder, and GIA puts titanium resizing at about half a size at most.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What titanium is

Titanium is a chemical element. Jewelry and watch cases use either commercially pure grades or titanium alloys such as Ti-6Al-4V. The metal weighs about 4.5 grams per cubic centimeter, and unalloyed titanium is as strong in tension as some steels while being much less dense, which is why a titanium band feels light next to gold.

ASTM recognizes 31 grades of titanium and titanium alloys. Grades 1 to 4 are commercially pure and differ in strength with their oxygen content: grade 1 is the most ductile and grade 4 the strongest. Alloys add other metals; Ti-6Al-4V adds 6% aluminum and 4% vanadium.

The moment titanium meets air, its surface oxidizes into a thin, non-porous layer that protects the metal underneath. That layer is why titanium resists corrosion and is used for implants, and it's also where titanium's colors come from. GIA describes the natural color as a cool, gunmetal gray. Anodizing thickens the oxide layer, and the voltage used sets its thickness, which produces color through light interference rather than through a dye or plating.

How titanium wears

GIA calls titanium highly durable, resistant to corrosion, wear and tarnish, and hypoallergenic and biocompatible. It doesn't darken like silver or need re-plating like white gold. What it does do is scratch. At about 6 on the Mohs scale, titanium is far softer than tungsten carbide (9 to 9.5) and not as hard as some heat-treated steels, so a polished band picks up fine scuffs from desks, railings and door handles. A brushed or matte finish hides them better.

Anodized color is only a thin oxide layer, so a deep scratch shows the gray metal underneath, and refinishing a colored ring removes the color along with the scratch. Titanium resists dents, one reason it's used for watch cases, but it is still a metal: a hard enough knock can bend a thin band out of round rather than cracking it.

Why it matters for repairs

Most jewelry repair depends on heat and solder, and titanium resists both:

  • No ordinary solder. Titanium isn't joined with routine gold solder, and when heated in air it reacts with oxygen and nitrogen. Welding it has to be done under argon or helium, because contamination by oxygen, nitrogen or hydrogen makes the joint brittle enough to fail.
  • Limited resizing. GIA lists titanium resizing as limited to half a size, against up to 2 sizes for gold and sterling silver. Where it's possible, a specialist enlarges the ring by removing a small, even amount of metal from the inside; making one smaller is less straightforward and may need a fitted insert, and an inlay can end up misaligned. Check the maker's resizing or exchange policy first. Our answer on resizing a titanium ring goes through the options.
  • Quoted, not priced. Titanium isn't among the metals on our resizing, soldering or polishing pages, and titanium solder work booked through the Start a Repair wizard goes to a free quote.

Emergency removal is its own case. Titanium can be cut, but it's tough. In a 2015 case report in the Emergency Medicine Journal, a swollen finger defeated the standard approaches, including elevation, lubrication, binding the finger and a manual ring cutter; operating-room bolt cutters then removed the band in under a minute. The authors noted that conventional removal can take as long as 15 minutes and can burn the skin. If a finger swells under a titanium ring, get help early.

Titanium vs tungsten carbide

They are the two most common alternative-metal bands and easy to confuse, since both are gray and both outlast gold in daily wear. The differences show up when something goes wrong:

  • Weight: tungsten carbide is about 15.6 g/cm³, roughly 3.5 times titanium's 4.5 (15.6 ÷ 4.5), so a tungsten band of the same size feels heavy and a titanium one feels light.
  • Scratches: tungsten carbide, at 9 to 9.5 on the Mohs scale, resists scratches far better than titanium at about 6.
  • Failure: titanium is a metal that dents and bends; tungsten carbide is brittle and can crack or shatter under a hard impact.
  • Resizing: GIA says titanium is limited to half a size and tungsten rings can't be resized at all.
  • Emergency removal: titanium is cut, sometimes with bolt cutters; tungsten carbide is cracked off with pressure, using tools such as locking pliers.

Both can be engraved here. Compared with stainless steel, titanium is the lighter metal, but steel is a priced metal choice on our repair pages and titanium isn't.

What we can do for a titanium piece

Engraving is the one job with a set price for titanium. Ring Engraving starts at $60 for an inscription inside or outside the band, in script or block letters; titanium isn't a separate metal choice on that page, so pick Other / not sure. On an anodized band the cut goes through the colored oxide, so the letters read as gray metal against the color. If the layout won't fit legibly, you're contacted before anything is cut.

A titanium watch bracelet that's too long is a pin-and-link job rather than metalwork: Link Removal & Addition is $19 for one link and $29 for two or more, with the removed links returned. A battery in a titanium watch is the same job as in any other case: Watch Battery & Pressure Check, $30 for most brands.

For sizing, scratches, a loose inlay or anything else, start with the Mail-In Evaluation: $19, credited in full toward the repair. A jeweler examines the piece under magnification and sends an itemized quote with photos. If it can't be done, you hear that before any work. If you decline, the piece returns with the photos and the jeweler's notes, and the $30 round-trip shipping already covers that leg. Titanium pieces are looked at in Sky Jewelry's New York studio, where the jewelers have logged over 50,000 repairs since 1989.

What it costs here

Service Price What's included
Ring Engraving from $60 An inscription inside or outside the band, in script or block lettering; the service covers titanium and tungsten as well as gold, silver and platinum. On an anodized band the cut shows as gray metal.
Link Removal & Addition from $19 one link
from $29 two or more
For a titanium watch bracelet or link bracelet: links removed by their pins or screws, evenly from both sides of the clasp, and the removed links returned.
Mail-In Evaluation $19 For sizing, scratches, a loose inlay or a crack: the piece examined under magnification and an itemized quote sent with photos. The $19 is credited in full toward the repair.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Can a titanium ring be soldered or welded?
Not like gold. Titanium isn't joined with ordinary gold solder, and heated in air it reacts with oxygen and nitrogen, so welding it has to be done under an argon or helium shield or the joint turns brittle enough to fail. That's why a cracked or broken titanium band has no set repair price here: it starts with the $19 Mail-In Evaluation, credited in full toward the repair, and you see photos and a quote first.
Why is a titanium ring hard to cut off in an emergency?
Because titanium is tough enough to defeat the usual tools. In a 2015 Emergency Medicine Journal case report, a manual ring cutter failed on a swollen finger and operating-room bolt cutters took the titanium band off in under a minute; the authors noted conventional removal can take up to 15 minutes and burn the skin. If a finger swells under a titanium ring, go to an emergency department early rather than waiting.
Will engraving show on an anodized titanium ring?
Yes, as gray letters. Anodized color is only a thin oxide layer on the surface, so an engraving cut goes through it and exposes the plain gray metal underneath, which gives a two-tone look rather than letters in the band's color. Ring Engraving starts at $60 here, inside or outside the band. Our answer on engraving tungsten and titanium rings covers the plain-metal case.
Is titanium jewelry hypoallergenic?
Yes. GIA describes titanium as hypoallergenic and biocompatible, and its chemical inertness is why it's used for implants and body piercing. A protective oxide layer forms on its surface as soon as it meets air, so it doesn't tarnish in everyday wear. If a titanium ring is coated or has an inlay of another material, that material touches your skin too, so check what it's made of.
Can scratches be polished out of a titanium ring?
Sometimes, but it isn't a set-price job here: titanium isn't a metal choice on our Jewelry Polishing page, so we look at it first. Polished and brushed bands are refinished differently, and an anodized color is a thin oxide layer that refinishing removes. Send it for the $19 Mail-In Evaluation, credited in full toward the repair, and you get photos and an itemized quote before any work begins.

All glossary terms · Repair questions · How online jewelry repair works

Sources