Metals & plating
Tungsten carbide
Tungsten carbide is a very hard, dense compound of tungsten and carbon, pressed from powder and sintered into rings, usually with a small metal binder. It resists scratches far better than gold, but it is brittle: a hard enough blow can crack or shatter it, and it can't be resized or repaired with solder the way gold can.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What tungsten carbide is
Tungsten carbide (WC) is a compound with one carbon atom for each tungsten atom. Rings are not cast like gold. The powder is pressed in a mold and sintered in a furnace into one solid piece, and a metal binder holds the carbide grains together, most often cobalt, sometimes nickel or iron. The result rates about 9 to 9.5 on the Mohs scale and weighs about 15.6 grams per cubic centimeter, roughly twice the density of steel. That is why tungsten bands feel heavy and stay free of scratches far longer than gold.
A ring sold as "tungsten" is usually tungsten carbide. That scratch resistance is the reason it is sold so widely as a wedding-band material, and the brittleness that comes with it is the reason so little can be done to one at the bench.
Why it can't be resized or repaired with solder
Tungsten carbide behaves more like a ceramic than a metal. Its hardness comes with brittleness, so it won't stretch on a mandrel, and cutting a band risks a break you can't control. A sintered band also can't be cut open and re-joined with added metal the way a gold band is sized, and heating it enough to reshape it would mean getting near its melting point, about 2,800°C. In practice:
- No resizing. Tungsten isn't among the metals on our Ring Resizing page, and soldered-in Ring Sizing Beads aren't possible either. If a band doesn't fit, check the seller's exchange or replacement policy.
- No crack repair. A cracked band can't be closed and made sound again; it has to be replaced. If the band came with a warranty or replacement plan, check with the seller or maker first.
- Emergency removal is different. Gold bends flat and has to be cut off. Tungsten carbide is cracked off instead, with tools such as locking pliers. Leave that to emergency staff or a jeweler rather than trying it at home, since the band is being broken right against the finger.
Tungsten carbide vs titanium
The two most common alternative-metal bands look alike, so the useful difference is how each one fails. Tungsten carbide is a sintered compound, not a pure metal: it resists scratches far better and is far heavier, but under a hard enough impact it cracks or shatters rather than bending, and a cracked tungsten band is finished. Titanium is a true metal, much lighter and softer, that scuffs and can bend rather than break; its entry covers what can and can't be done for it. For tungsten, the choices after damage are simple: replace the band, and if the words inside matter, have the new band engraved.
What we can do for a tungsten ring
Engraving is the one set-price service on our site that covers tungsten carbide. Ring Engraving cuts your words into a tungsten band, on the inside or the outside, from $60, with a choice of script or block letters. Because the band can never be sized afterward, engrave it only once you're sure of the fit: the band you engrave is the band you keep. Before cutting, the jeweler confirms the layout fits, and if it won't read cleanly, you're contacted first.
Anything else, from a loose inlay to a chip at the edge, is first examined through a Mail-In Evaluation, since no listed price covers it. For $19, credited in full toward approved work, a jeweler examines the band under magnification and sends photos with an itemized quote. Approve all, some or none of it; a band you don't repair comes back with the photos and findings, its return already paid for by the $30 round trip.
Tungsten bands sent to JewelryRepair.com are worked on at Sky Jewelry's New York studio by a bench jeweler and checked by a second, photographed on arrival and again before they ship back, with $100 of UPS coverage included each way. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has done over 50,000 repairs since 1989.
What it costs here
| Service | Price | What's included |
|---|---|---|
| Ring Engraving | from $60 | An inscription inside or outside the band, in script or block lettering; tungsten carbide bands are covered. The exact price is set on the repair page. |
| Mail-In Evaluation | $19 | For a loose inlay, a chip or damage you can't name: the ring examined under magnification and an itemized quote with photos. The $19 is credited in full toward the repair. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Is tungsten carbide the same as tungsten?
Why is a tungsten ring so heavy?
Can a cracked tungsten ring be repaired?
Can you engrave a tungsten ring?
How do you get a tungsten ring off in an emergency?
See also
All glossary terms · Repair questions · How online jewelry repair works