Jewelry repair questions · Rings & sizing

Can a tungsten ring be resized?

No. Tungsten carbide is sintered from powder into one hard, brittle piece, so it can't be cut and soldered, stretched or fitted with sizing beads the way gold can. Your options are the seller's size exchange, a removable fit fix, or a new band in the right size. JewelryRepair.com can engrave the replacement band from $60.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

9 to 9.5Mohs hardness of tungsten carbide: scratch-resistant, but brittle
$30UPS round trip per order, prepaid label in your account
$60Ring Engraving on a replacement tungsten band
50,000+repairs since 1989

The short version

  • Tungsten can't be resized, up or down. GIA puts it plainly: because of their brittleness, tungsten rings cannot be resized, and if your size changes you may need to replace the ring.
  • The usual workarounds don't apply. It can't be stretched, compressed or fitted with soldered sizing beads, because it won't bend and a jeweler can't solder metal into it.
  • Start with the seller. Many tungsten band makers and sellers build a size exchange into their warranty.
  • Too big for now? A removable silicone ring guard is the safe temporary fix.
  • Too small? Don't force it over the knuckle. A tungsten band that's stuck is cracked off, not cut off.
  • Ordering again? Get the size right first, because there's no adjusting it afterward.

Prices

Service PriceWhat's included
Ring Engraving from $60Carries the inscription over to a replacement band: machine engraving inside or outside, in script or block lettering, on tungsten and titanium as well as gold, silver and platinum. Choose Other / not sure as the metal for tungsten; if the text won't fit legibly, the jeweler contacts you before cutting.
Mail-In Evaluation $19For a band you're not sure is tungsten carbide, or one with a chip or a damaged inlay: examined under magnification, with photos and a plain-English answer about what that material allows. Credited in full toward any work you approve.

Why tungsten carbide can't be resized

Resizing a gold, silver or platinum ring is metalwork. To make it bigger, a jeweler cuts the band at the bottom, opens it on a steel mandrel and solders in a piece of matching metal; to make it smaller, a section comes out and the ends are soldered together. Small changes can also be made by stretching or compressing the band. Every one of those methods needs a material that bends and accepts solder.

Tungsten carbide does neither. A "tungsten ring" is really tungsten carbide, a compound of tungsten and carbon, cemented with a small amount of a binder metal, usually cobalt or nickel. It isn't cast and worked like gold: Polymer Solutions, a materials-testing laboratory, explains that the ring is formed by sintering the powder in a mold into one solid piece. Wikipedia puts the result at about 9 to 9.5 on the Mohs scale, which is why it shrugs off scratches, but it behaves more like a ceramic than a metal:

  • It won't bend. Stretching works by making metal flow around a mandrel. Tungsten carbide doesn't flow; forced hard enough, it cracks.
  • Cutting it is a gamble. The same lab compares cutting a tungsten band to cutting glass: it could break in a direction you didn't choose.
  • Sizing stock can't be added. A jeweler can't solder sizing stock, beads or a sizing bar into it the way they can with gold, so there's no way to add metal to make it bigger.
  • Heat doesn't help. Polymer Solutions notes that heating it to forging temperatures would make the ring melt and lose its shape.

Jewelers Mutual's guide to resizing lists titanium, cobalt, tungsten and stainless steel rings as difficult or impossible to resize, along with ceramic and plated rings. GIA's comparison of ring materials goes further for tungsten and simply marks it as not resizable. A gold or silver inlay doesn't change that, because the body of the band is still carbide.

My tungsten ring is too big: what now?

  • Check for a size exchange first. One tungsten ring seller notes that most manufacturers plan for this and include size exchanges in their warranties. Find the receipt or order confirmation and read the terms, or ask the seller, before anyone works on the ring.
  • Give it a few days before deciding. Jewelers Mutual notes that finger size fluctuates through the day, and that heat, humidity, exercise, salty foods and alcohol can make fingers swell; GIA adds that fingers shrink in the cold. A band that slides on a cold morning may be right by a warm afternoon.
  • Use a removable ring guard. Jewelers Mutual describes silicone sleeves or wedges that slide over the underside of the band, and warns against tape, liquid guard or food-grade silicone, which can damage a ring. More in ring guards.
  • Move it to another finger where it fits while you sort out an exchange.

Sizing beads, the jeweler's permanent version of a guard, are soldered inside the band, so they can't go on tungsten carbide. On gold, silver or platinum they start at $40 with Ring Sizing Beads.

My tungsten ring is too small

  • Don't force it. GIA's sizing advice is simple: the ring has to slide over the knuckle. A band you have to twist hard to get on may not come back off once your finger swells.
  • It can't be stretched, not even by the half size Jewelers Mutual says a plain band without stones can sometimes take.
  • Exchange or replace it, and measure properly first (below).
  • If it's stuck, get medical help rather than pulling harder. Gold and silver bands are cut off. Tungsten carbide is removed by cracking it: Polymer Solutions explains that locking pliers apply enough pressure to fracture the ring for safe removal. The band won't survive, and the finger matters more.

Getting the size right on the next band

Because a tungsten band can't be adjusted, the measurement does all the work.

  • Measure at a normal temperature, not first thing on a cold morning or right after a workout. GIA notes a reading taken on a cool morning can differ from one taken in the afternoon.
  • Allow for width. GIA says rings with wide shanks usually need to be a bit larger, because they fit more snugly. If the new band is wider than the ring or sizer you measured with, expect to go up a little.
  • Check the knuckle. The band has to pass over it and then sit without spinning.
  • Think ahead. Jewelers Mutual lists weight changes, pregnancy and conditions such as arthritis among things that change how a ring fits. If any of those may apply, a band in a metal that can be resized may serve you better.

Our guide to finding your ring size at home walks through measuring, and Ring Too Small or Too Big? Every Fix, Compared lays out every fit fix side by side.

Which ring metals can be resized?

  • Gold, silver and platinum: resized with matched metal, and most rings can go about 2 to 3 sizes either way. Ring Resizing starts at $45.
  • Titanium: GIA calls resizing challenging and limits it to about half a size. See whether a titanium ring can be resized.
  • Stainless steel and cobalt: difficult, per Jewelers Mutual. Ring Resizing lists stainless steel (+$58), and steel pieces that need solder work are confirmed by quote first; see whether a stainless steel ring can be resized.
  • Tungsten carbide: not resizable at all; plan on an exchange or a new band. Ceramic is on Jewelers Mutual's difficult-or-impossible list too.

Not sure which one you have? Tungsten carbide weighs about 15.6 grams per cubic centimeter, roughly twice the density of steel and about three and a half times that of titanium (15.6 ÷ 4.5), so a tungsten band feels noticeably heavy for its size. A band that feels light is more likely titanium or steel, and those have different options. The full list is in which ring metals can't be resized.

What JewelryRepair.com can do for a tungsten ring

There's no tungsten resizing on our menu, and we won't suggest a workaround the material can't take. What we can do:

  • Tell you what the ring is. If you're not sure it's tungsten carbide, the Mail-In Evaluation, $19 and credited in full, gives you a jeweler's answer with photos. If it turns out to be gold, silver or steel, the itemized quote covers what that metal allows.
  • Engrave the replacement. Ring Engraving works on tungsten and titanium, inside or outside the band, from $60. Copy the inscription from the old band into the order form.
  • Size a band that can be sized. If you replace tungsten with gold, silver or platinum, Ring Resizing starts at $45, and sizing down a 14K yellow gold band is $65 ($45 + $13 + $7).
  • Answer the next question. A cracked tungsten band can't be repaired either; see can a cracked tungsten ring be repaired?

Shipping is $30 round trip per order by UPS, with the prepaid label ready in your account and $100 of coverage each way. Your ring is photographed when it arrives at our New York studio and again before it ships back in a plain box, signed for at your door. A bench jeweler does any work, a second jeweler checks it, and it carries our 1-year workmanship guarantee. Sky Jewelry, family jewelers on Lenox Avenue since 1989, has completed over 50,000 repairs; JewelryRepair.com is how it takes them in by mail.

Questions

Can you add sizing beads to a tungsten ring?
No. Sizing beads are small balls of metal soldered inside a band, and a jeweler can't solder metal into tungsten carbide the way they can with gold. A removable silicone ring guard is the safe alternative for a band that's a little loose; avoid tape and liquid guards. On gold, silver or platinum, Ring Sizing Beads at JewelryRepair.com start at $40.
My tungsten ring is too big. What can I do?
Check the seller's size exchange first, since many tungsten band warranties include one. Meanwhile, wear it for a few days, because fingers swell with heat and shrink in the cold, and use a removable silicone ring guard if it slides. Don't use tape or liquid guards, which can damage a ring. The band itself can't be made smaller, by cutting or by adding beads.
Can a tungsten ring be stretched?
No. Stretching works by making metal flow around a mandrel, and tungsten carbide is too hard and brittle to flow; forced, it cracks. Even a plain band without stones can only sometimes be stretched, by about half a size according to Jewelers Mutual. If your tungsten band is too small, ask the seller about an exchange or replace it with one measured carefully.
How do you get a tungsten ring off if it's too tight?
Try soap and water first, and if the finger is swollen or the band won't move, get medical help rather than forcing it. Tungsten carbide can't be cut off like gold; it's removed by cracking it, with tools such as locking pliers applying enough pressure to fracture the band. It won't survive, so plan on a replacement in the right size.
Should I size up for a tungsten ring?
Only if your measurement calls for it. GIA notes that rings with wide shanks usually need to be a bit larger because they fit more snugly, so if your new band is wider than the ring you measured with, allow for that. Measure at a normal temperature, make sure it passes your knuckle, and remember that a tungsten band can't be adjusted afterward.
Is titanium or tungsten better if my ring size might change?
Titanium is slightly more forgiving, but neither is ideal: GIA calls titanium resizing challenging and limits it to about half a size, while tungsten can't be resized at all. If your size may change, gold, silver or platinum are the practical choice, because most rings in those metals can be resized about 2 to 3 sizes. Ring Resizing at JewelryRepair.com starts at $45.