Jewelry repair questions · Chains, clasps & bracelets

How can I shorten a necklace or bracelet without cutting the chain?

Clip the clasp into a link further up the chain, or gather the extra length at the back with a shortener clip. A long chain can be wrapped twice, and a fine cable chain can take a loose knot for an evening. Avoid knotting snake or herringbone chain. To shorten it for good, Chain Shortening starts at $44.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

about 1 inthe front rises for every 2 inches taken out, because length comes off both sides
$44Chain Shortening, links removed at the clasp end and returned to you
$19one link out of a metal link bracelet ($5 + $14)
50,000+repairs since 1989

The short version

  • Clip the clasp higher. On a cable, curb or similar chain with open links, hook the lobster or spring ring into a link further up. It costs nothing and undoes in a second.
  • Use a shortener clip to gather the extra length at the back without touching the clasp.
  • Wrap a long chain twice and fasten it as usual.
  • A loose knot works on a fine cable chain for an evening. Avoid knotting snake and herringbone chain, and be careful with box chain.
  • Bracelets: the same clasp trick, an extender, or the small holes in a watch-style clasp.
  • Always wear it shorter? Have it shortened at the clasp end. Chain Shortening starts at $44, and the removed links come back to you.

Prices

Service PriceWhat's included
Chain Shortening from $44Links removed at the clasp end so the front stays original, the clasp re-soldered and tested, and the removed links returned. 1.5mm sterling or 10K yellow gold cable $44; 2mm 14K yellow gold $55 ($44 + $6 + $5); 2mm 14K white gold $66 ($44 + $11 + $6 + $5); 3mm sterling rope $79 ($44 + $25 + $10).
Link Removal & Addition from $19Metal link bracelets and watch bands, taken apart by the method the band uses (friction pins, screws or pin-and-collar), with removed links returned. $5 base plus $14 for one link or $24 for two or more.
Clasp Replacement from $48When the clasp is the problem: a spring ring or lobster that no longer snaps shut, replaced, soldered on and action-tested, or the original repaired. Small silver lobster $48; medium 14K yellow gold lobster $95 ($48 + $28 + $19).
Chain Lengthening from $54If a chain was shortened too far, or needs a little more: matching links added at the clasp end, where the join sits out of sight. 1.5mm 14K yellow gold cable $65 ($54 + $6 + $5).

First, work out how much shorter

A necklace hangs as a loop, so length comes off both sides at once: taking out 2 inches lifts the lowest point at the front by roughly 1 inch. Rio Grande, the jewelry supply house, lists the standard finished chain lengths as 16, 18, 20, 22, 24, 30 and 36 inches, with bracelets commonly 7 inches, so going from a 20-inch chain to an 18-inch fall lifts a pendant about an inch.

To find your number, put the necklace on in front of a mirror, pinch the chain at the back of your neck where you'd like it to fasten, and measure the chain in the loop you're holding. For a bracelet, close it on your wrist and pinch the extra the same way; how tight a bracelet should be covers the fit. That number tells you which method below will work: an inch or two is easy to take up at the clasp, while six inches is a job for a shortener, a double wrap or a jeweler.

Five ways to shorten a necklace without cutting it

Match the method to the chain. Open-link chains take the clasp in a higher link; long chains wrap; beaded and pearl strands need a shortener; only fine cable chains tolerate a knot, and only briefly.

  • Clip the clasp into a higher link. The simplest fix, and one Jewelers Mutual, the jewelry insurer, also suggests: hook the clasp into a link closer to the end. It suits chains whose links are open and big enough for the clasp to pass through: cable, curb, figaro, rolo and paperclip styles. Check that the lobster's spring-loaded gate closes fully around the link, and tuck the spare tail inside your collar so it doesn't swing forward. A fine link isn't made to carry the clasp's pull, so look it over now and then for stretching, and don't make the same small link take the strain every day for years.
  • Wrap it twice. A 30- or 36-inch chain can go around the neck twice and fasten as usual, as long as the inner loop isn't snug; Jewelers Mutual's one caution is to keep it from getting too tight.
  • A shortener clip. Small clasps sold as necklace shorteners grip the chain at the back and take up the slack. For beaded and pearl strands, which can't be hooked or knotted, Jewelers Mutual points to oval shorteners that gather the strand at the length you want. Choose one with smooth edges that won't pinch fine links.
  • A loose knot. For fine, small-link chains, Jewelers Mutual suggests a knot. Keep it loose, at the back, and untie it the same day. A knot pulled tight bends links sharply, and that is how stretched links and kinks start; see how to get a kink out of a necklace chain.
  • An earring post. A stud's post pushed through two neighboring links and secured with its back, another Jewelers Mutual idea, holds for an evening. The back can slip off, the post can bend and the metal can scratch the chain, so use an earring you won't miss.

Chains you shouldn't knot or hook

Some chains have no open links for a clasp to catch, and they kink rather than knot. Once creased, they rarely look new again.

  • Snake chain is made of curved metal plates tightly joined, per Rio Grande's chain guide. There's nothing for a clasp to hook into, and a knot or sharp bend can crease it for good.
  • Herringbone is rows of flat, V-shaped links. Bench jewelers on Ganoksin's Orchid forum say a kinked herringbone can be worked back close to new but tends to kink again, and one describes a shop policy of scrapping them. Never knot it, wrap it tightly or clip anything onto it; see whether a kinked herringbone can be repaired.
  • Omega is small plates crimped onto a mesh, which Rio Grande notes gives it limited flexibility. Its length is a job for a jeweler.
  • Box chain has squared-off links, and Rio Grande calls it sturdy, so it is less delicate than snake or herringbone. Be careful with it all the same: keep any knot loose and brief.
  • Pearl and bead strands are strung on silk or cord. Use an oval shortener, or have the strand restrung shorter; see whether a pearl necklace can be shortened.

Bracelets: making one smaller without removing links

  • Chain bracelets: clip the clasp into a higher link, exactly as on a necklace. If the bracelet came with an extender, its spare loops are there for this.
  • Metal watch-style bracelets: many clasps have a row of small holes along the sides, and moving the spring bar between them fine-tunes the length without taking out a link, as Monochrome Watches explains; it takes a small tool to compress the bar. When the holes run out, links come out: Link Removal & Addition is $19 for one link or $29 for two or more, and the links come back to you. See how to remove links from a watch band.
  • Tennis bracelets: every link is a stone setting, so there's no open link to hook into. Shortening one means removing links; see whether a tennis bracelet can be shortened.
  • Open cuffs can be squeezed slightly smaller by hand, with the same rules as an adjustable ring: small moves, done once. See how to adjust an adjustable ring and whether a bangle or cuff can be resized.

When a permanent shortening is the better answer

A temporary fix is right for a necklace you wear at different lengths. Shorten it for good when you always wear it at the shorter length, when the spare tail catches your hair or slides to the front, when you keep hooking the clasp into the same fine link, or when the chain is a type that can't be hooked or knotted. If the clasp keeps creeping around to the front, length is often part of the story; see why a necklace clasp moves to the front.

At JewelryRepair.com the jeweler measures twice before cutting once. Links come out at the clasp end, so the front of the chain, the part people see, stays original metal; the clasp is re-soldered to the new end link, tested and the joint polished. Patterned chains such as rope and Cuban take extra care, because the cut has to fall where the pattern allows. The removed links come back to you in the return package. If you ever want the length back, Chain Lengthening adds matching links at the clasp end, from $54.

A tired clasp is a separate problem. If a spring ring or lobster no longer snaps shut, perhaps after years of being clipped into links, Clasp Replacement fits a new one, soldered on and action-tested, or repairs the original, from $48.

What it costs at JewelryRepair.com

JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. Chain Shortening prices from the live repair page, Nov 18, 2026, each including a clean and polish and the 1-year workmanship guarantee:

  • $44 for a 1.5mm sterling silver or 10K yellow gold cable, ball or box chain.
  • $55 for a 2mm 14K yellow gold chain ($44 + $6 + $5); $66 in 14K white gold ($44 + $11 + $6 + $5).
  • $79 for a 3mm sterling rope chain ($44 + $25 + $10); $63 for a 1.5mm 14K yellow gold snake chain ($44 + $6 + $13).
  • $125 for a 14K white gold tennis bracelet, before any thickness charge ($44 + $11 + $6 + $64).

Put the finished length you want in the order notes; you see the full price before anything ships. Shipping is $30 round trip per order by UPS, with the prepaid label in your account: lay the chain in a small sealed bag, pad it in any sturdy small box with nothing outside naming the contents, and drop it at any UPS location. $100 of coverage is included each way; full value up to $10,000 is 2.5% of the value above $100, one fee for both directions, so a $1,000 chain costs $22.50 to cover. The chain is photographed on arrival at the New York studio and before it ships back, a bench jeweler does the work, a second jeweler checks it, and a signature is required both ways. US addresses only.

Questions

How do you shorten a necklace with a lobster clasp?
Open the lobster and clip it into a link further up the chain instead of the ring at the other end, then tuck the spare tail inside your collar. It works on chains with open links big enough for the clasp, such as cable, curb and figaro. Make sure the gate snaps fully shut, and check that link now and then, because it isn't made to carry the clasp's pull.
Does tying a knot in a necklace damage it?
A loose knot on a fine cable chain, untied the same day, usually does no harm. A tight knot bends links sharply and can stretch them, and on snake and herringbone chains a knot or sharp bend can leave a permanent kink. If a knot has pulled tight, open it with two pins rather than tugging the ends; Chain Untangling at JewelryRepair.com is $15.
How do you make a bracelet smaller without removing links?
Clip the clasp into a link further up, use the extender if it has one, or, on a metal watch-style bracelet, move the spring bar to a tighter hole in the clasp. Open cuffs can be squeezed slightly smaller, gently and once. When none of that is enough, Link Removal & Addition at JewelryRepair.com is $19 for one link, and the removed links come back to you.
How much does it cost to have a necklace shortened?
At JewelryRepair.com, Chain Shortening starts at $44 for a 1.5mm sterling silver or 10K yellow gold chain, and a 2mm 14K yellow gold cable chain is $55 ($44 + $6 + $5). Rope, Cuban, snake and tennis styles add a style charge. The price includes re-soldering the clasp, a clean and polish and the 1-year workmanship guarantee; shipping is $30 round trip per order.
Do I get the removed links back?
Yes. At JewelryRepair.com, the links taken out in Chain Shortening, and in Link Removal & Addition for bracelets and watch bands, come back to you in the return package, because that metal is yours. Links come off at the clasp end, so the front of the chain stays original. If you change your mind later, Chain Lengthening adds matching links at the clasp end, from $54.
Can a snake or herringbone chain be shortened?
Not by knotting or hooking: they have no open links, and a knot or sharp bend can kink them for good. They can be shortened permanently at the clasp end. Chain Shortening at JewelryRepair.com lists snake chain, so a 1.5mm 14K yellow gold snake chain is $63 ($44 + $6 + $13). Herringbone isn't a listed type, so ask for a free quote before you ship.