Jewelry repair questions · Chains, clasps & bracelets
Can a necklace chain be shortened or lengthened?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Yes, in both directions. Shortening takes links out at the clasp end; lengthening adds matching links there. The visible front of the chain is never cut.
- Shortening is the easier job, and the removed links come back to you.
- Lengthening depends on matching. The new links have to continue your chain's pattern, gauge and finish. Ball, cable and box chains are the straightforward cases.
- Decide the finished length first and write it in the order note. Measure a chain that already sits where you want it, end to end including the clasp.
Prices
| Service | Price | What's included |
|---|---|---|
| Chain Shortening | from $44 | Links removed at the clasp end, clasp re-soldered and tested, joint polished; removed links returned. White or rose gold +$11, 14K +$6, 18K +$10; snake +$13, rope +$25, Cuban +$38; 2mm +$5 up to 5mm +$20. |
| Chain Lengthening | from $54 | Matching links soldered in at the clasp end and polished with the rest of the chain. White or rose gold +$11, platinum +$84; 14K +$6, 18K +$10; cable +$5, box +$10; 2mm +$10 up to 5mm +$40. |
| Chain Soldering | from $30 | If the chain is also broken somewhere else: one break in sterling silver rejoined; hollow chains are laser-welded (+$20). |
| Clasp Replacement | from $48 | When the clasp is worn, or too small or too weak for the chain: a spring ring, lobster or box clasp soldered on and action-tested. |
| Mail-In Evaluation | $19 | For patterned chains that need length added, or anything you're unsure about: examined under magnification, itemized quote with photos. |
How a jeweler shortens a chain
The jeweler measures the chain against your finished length, opens it at the clasp end and takes the extra links out from there. The clasp, or the ring it hooks into, is re-soldered to the new last link, tested, and the joint polished out. The only new joint sits behind the neck.
- Plain links (cable, ball, box, rolo-style rounds) can be cut almost anywhere, so they cost the least.
- Patterned chains take more care because the cut has to land where the pattern can be closed cleanly. Rio Grande's chain guide describes rope chain as twisted links each connected to two others, and Wikipedia describes the Cuban link as derived from the classic curb chain, with thick, interlocking oval links. The last link has to be finished so the pattern doesn't fray, which is why snake adds $13, rope $25 and Cuban $38 on the shortening page, priced before you order.
- Hollow chains: if you know yours is hollow, say so in the order note. On Chain Soldering, hollow chains are laser-welded rather than torch-soldered.
- White gold: solder work on white gold includes rhodium re-plating of the repaired area, so the joint matches the rest of the chain.
The removed links travel back with the finished chain. Keep them together: if you ever want the length back, nothing will match better.
Lengthening: what's possible, chain by chain
Finding the right links is most of the work. A new section only disappears if its link shape, wire thickness and polish continue the old chain, and that's easier for some chains than others:
- Ball, cable and box chains are the common cases, and the Chain Lengthening page prices them directly: ball at the base price, cable +$5, box +$10.
- Curb, Figaro, rope, Cuban, wheat and herringbone are patterned or woven. Rio Grande describes herringbone as rows of V-shaped links running in opposite directions and Figaro as one long link alternating with three to five short ones, so a new section has to line up with the rhythm of the old one. These aren't listed on the lengthening page; start with a free quote or the $19 Mail-In Evaluation, credited in full, so you see what's possible and the price before any work.
- Snake chain: Cooksongold notes a snake chain can look impossible to repair because of how it's built, and for a broken end suggests soldering on an extender. Lengthening one starts with a free quote or the Mail-In Evaluation.
- Old, hand-made or discontinued chains may have no matching links available. Then the honest options are an extender at the back, a link that's close rather than identical, or a new chain.
An extender, a short length of chain with a ring the clasp hooks into, is the quick alternative, but it shows at the back of the neck. Matched links read as one chain.
Choosing the new length
Rio Grande's guide to jewelry chain lists the standard finished lengths as 16, 18, 20, 22, 24, 30 and 36 inches. Where each falls depends on your build, so a chart only gets you close:
- Measure a chain that already sits right. Lay it flat and measure end to end, including the clasp. That's the number for the order note.
- Allow for the pendant. Its bail and its own drop hang below the chain, and its weight pulls the chain into a V, so it sits lower than the same chain alone.
- Between two lengths, shorten less. More links can come out later; putting length back means matching links.
- Know the thickness. Rio Grande measures chain width across the outside of the widest link, the figure the configurator asks for, from 1.5mm to 5mm.
For a change you can try first, see how to shorten a necklace without cutting it.
What it costs at JewelryRepair.com
Worked examples from the live repair pages, Nov 18, 2026:
- Sterling silver cable chain, 1.5mm, shortened: $44. Cable adds nothing on the shortening page.
- 14K yellow gold rope chain, 3mm, shortened: $85 ($44 + $6 for 14K + $25 rope + $10 for 3mm).
- 14K white gold Cuban link, 4mm, shortened: $114 ($44 + $11 white gold + $6 + $38 Cuban + $15 for 4mm).
- 14K yellow gold cable chain, 2mm, lengthened: $75 ($54 + $6 + $5 cable + $10 for 2mm).
Every price includes a clean and polish and the 1-year workmanship guarantee. Rush Service (+$50) ships it back 2 to 3 days sooner. Link bracelets and metal watch bands are sized by whole links instead: Link Removal & Addition is $19 for one link and $29 for two or more; see can a bracelet be resized.
Shipping is $30 round trip per order by UPS, with $100 of coverage each way. To cover a $1,500 gold chain in full, both directions, add $35 (2.5% of the $1,400 above $100). Chains are resized at the bench of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs completed.
When it isn't worth it, and the alternatives
- Plated or fashion chains. Gold-plated chains aren't a listed metal on either length service, and plated pieces that need solder work are quoted first.
- A clasp that's the real problem. If the length is fine but the clasp is hard to work or too small for the chain, Clasp Replacement starts at $48; see can a necklace clasp be replaced.
Before you ship
- Write the finished length you want, in inches, in the order note, and the chain type if you know it.
- Wrap the chain so it can't shift or knot. Label, packing and coverage steps are in is it safe to mail jewelry?
- At our New York studio it's photographed on arrival and again before it ships back, and a second jeweler checks the work.
Questions
How much does it cost to shorten a necklace chain?
Can you add 2 inches to a necklace chain?
Do I get the removed links back?
Is it better to shorten a chain or buy a new one?
Can a snake or rope chain be shortened?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list