Chains & clasps

Rope chain

Gold rope chain soldered with a fine torch flame on a soldering block

A rope chain is a round chain made of many small links, each angled and nested inside its neighbors so together they climb in one continuous spiral that looks like twisted cord. It is made solid or hollow, and because that spiral has to line up across any joint, a break takes more bench work than a plain cable chain.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How a rope chain is made

Look closely at a rope chain and no link stands on its own. Each is a small loop left slightly open so it can pass through several neighbors, set at a slight turn to the last, so the links climb in one tight spiral. With every link bearing on several others, the chain is round and supple, not flat.

Rope is sold by width in millimeters, and it comes two ways:

  • Solid rope. Every link is solid wire. It is heavier for its width, and a break takes a conventional torch solder.
  • Hollow rope. The links are thin-walled tubes, so the chain looks thicker than its weight suggests. Those thin walls dent when pinched and can collapse under torch heat, which is why hollow chains are laser-welded on our bench instead.

How a rope chain wears or breaks

  • A snag breaks it, and a break can spread. Rope usually parts when it catches on something and gets pulled. Because each link is threaded through its neighbors, the links beside the break are often bent or opened too, and once one link goes, the ones next to it can follow one after another, so put the chain away as soon as it breaks. A clean repair trims back to sound links, then re-weaves the ends so the spiral runs on through the joint.
  • The clasp end wears thin. The last links before the clasp flex every time the chain goes on and off. A chain that keeps breaking there may need those end links removed or a new clasp, not another solder joint.
  • Hollow links dent and crush. A pinch or a slammed drawer can flatten hollow links, and crushed links are weaker than the rest, so a crushed section is assessed before a price is set.
  • Kinks. A sharp bend can lock links so a section stays stiff. Kink removal is not a listed service here, so a kinked rope chain starts with the $19 Mail-In Evaluation.
  • The pendant wears its bail. A pendant sliding along a rope chain slowly wears its bail thin from the inside. Bail Repair starts at $39.

How to tell what your rope chain needs

  • Solid or hollow? Hollow rope usually feels light for how thick it looks. If you can't tell, choose Not sure under the hollow question on the Chain Soldering page. The jeweler checks on arrival, and you approve any price change before work begins.
  • One break or a frayed section? Lay it flat in good light and run it through your fingers. One parted joint with neat ends is a standard solder job. Several bent links around the break mean more links come out, and the chain can end up slightly shorter; flat spots or a stiff section point to crushed links or a kink.
  • Check the clasp. If it opens with a light tug, replace it at the same time; both repairs ship in one box for the same $30 round trip.
  • Gold, plated or steel? If you don't know the metal, choose Not sure and it is tested at no charge. Chain Soldering lists stainless steel (+$18) and gold-plated (+$17) options, while the Start a Repair wizard sends plated and steel solder work to a free quote first.

Rope chain vs Singapore chain

Side by side in the hand, the two are easy to tell apart. Rope is dense and round, like a miniature cord. A Singapore chain is usually much finer and lighter, and its links are set with a built-in twist, so it ripples as it moves and never quite lies straight, even flat on a table. It is sometimes called a twisted curb.

At the bench the difference is the spiral. Rope is its own priced chain type on Chain Soldering and Chain Shortening (+$25), because the cut and the joint have to land where the spiral continues unbroken. A Singapore chain has no separate option; it is booked as Something else, and the jeweler confirms the scope on arrival. A Cuban link chain is different again: heavy curb links that interlock when laid flat, priced at +$38.

What it costs here

Prices from the live repair pages, Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee, so a solder joint that reopens is redone at no charge:

  • One break, Chain Soldering: $55 in sterling silver ($30 + $25 for rope). In 14K yellow gold it is $66 solid ($30 + $7 + $4 + $25) or $86 hollow (add $20 for the laser weld); white gold includes rhodium on the repaired area. Two breaks add $17, three add $35 and four add $52.
  • Shortening, Chain Shortening: $69 for a 1.5mm sterling silver rope ($44 + $25), with the removed links returned. Width adds $5 at 2mm up to $20 at 5mm, and 14K adds $6, so a 3mm 14K yellow gold rope is $85 ($44 + $6 + $25 + $10).
  • A new clasp, Clasp Replacement: from $48. Heavier chains get a lobster with a spring strong enough to hold them; a medium 14K yellow gold lobster is $95 ($48 + $28 + $19).
  • Lengthening: rope is not one of the chain types listed on Chain Lengthening, so ask for a free quote through the contact page before ordering.
  • Crushed, kinked or several breaks: the $19 Mail-In Evaluation, credited in full toward the repair you approve.

Shipping is $30 round trip per order. Insuring a $2,500 gold rope for its full value adds $60 (2.5% of the $2,400 above the included $100), one fee for both directions; shipping and insurance has the details. Rope repairs are done by hand at the New York bench of Sky Jewelry, the family jewelers on Lenox Avenue since 1989 who run JewelryRepair.com, with over 50,000 repairs since 1989.

Prices at a glance

Service Price What's included
Chain Soldering from $55 rope One break in a sterling silver rope chain ($30 + $25 for rope), rejoined so the spiral runs through the joint and finished flush. Solid rope is torch-soldered; hollow rope is laser-welded (+$20). 14K yellow gold: $66 solid, $86 hollow.
Chain Shortening from $69 rope Links removed at the clasp end of a 1.5mm sterling silver rope ($44 + $25), the clasp re-soldered and the removed links returned to you. Thicker chains add $5 to $20.
Clasp Replacement from $48 A spring ring or lobster clasp sized to the chain's weight (box clasps from $130), soldered on and action-tested, or your original clasp repaired when it can be saved.
Mail-In Evaluation $19 For crushed, kinked or many-break chains: examined under magnification, an itemized quote with photos, and the $19 credited in full toward the work you approve.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Why do rope chains break, and can they unravel?
Rope chains usually break when they snag and get pulled, or where the end links have worn thin beside the clasp. Because every link is threaded through its neighbors, one broken link can loosen the next, so a broken rope chain can keep coming apart if it's worn. Put it away once it breaks. At JewelryRepair.com one break is rejoined for $55 in sterling silver and $66 in solid 14K yellow gold.
How much does it cost to fix a rope chain?
Fixing one break in a rope chain costs $55 in sterling silver at JewelryRepair.com: the $30 Chain Soldering base plus $25 for the rope pattern. Solid 14K yellow gold is $66, hollow 14K yellow is $86, and solid 18K yellow is $74. Two breaks add $17. Round-trip UPS shipping is $30 per order, and the repair carries a 1-year workmanship guarantee.
How can I tell if my rope chain is hollow?
A hollow rope chain usually feels light for how thick it looks, and its links dent more easily than solid ones. If you aren't sure, choose Not sure for the hollow question on the Chain Soldering page. The jeweler checks it when it arrives, and if the answer changes the price, you approve the change before any work begins. Hollow rope adds $20 because it is laser-welded.
Can a rope chain be shortened?
Yes. Chain Shortening removes links at the clasp end, so the front of the chain stays original, then re-solders the clasp and returns the removed links to you. At JewelryRepair.com a 1.5mm sterling silver rope is $69 ($44 plus $25 for rope), thicker chains add $5 to $20 by width, and a 3mm 14K yellow gold rope is $85.
Can a kinked rope chain be straightened?
It depends on the kink, so it starts with an inspection rather than a set price. Kink removal isn't a listed service at JewelryRepair.com, and a sharp kink in hollow rope can leave crushed links. Book the $19 Mail-In Evaluation: a jeweler examines the chain under magnification and sends an itemized quote with photos, and the $19 is credited in full toward the repair you approve.
What is the difference between a rope chain and a Singapore chain?
A rope chain is round and dense, its links spiraled so it looks like twisted cord. A Singapore chain is usually much finer, with links set at a twist so it ripples and never lies quite straight. For repairs, rope is a priced chain type (+$25 on Chain Soldering and Chain Shortening) because the spiral must line up across the joint, while a Singapore chain is booked as Something else and confirmed by the jeweler on arrival.

All glossary terms · Repair questions · How online jewelry repair works

Sources