Chains & clasps
Snake chain
A snake chain is a smooth, flexible chain built from tiny star-shaped plates nested one into the next, so it looks like a single smooth tube of metal, usually round, with a fine scaled surface and no visible links. It drapes and slides well, but a sharp fold can kink it, and a break needs careful, low-heat soldering.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
What a snake chain is
A snake chain has no open links. The MJSA chain glossary, now published by Jewelers of America, explains that it is made from star-shaped pieces stamped out of flat metal and stacked so each sits on the one before, which it calls "a soft, supple chain". Put another way, it behaves like a flexible rod of nested plates: it bends in a smooth curve instead of folding link by link. Wikipedia's chain article notes that snake chain can be round or square in section. Production is slow; by the glossary's estimate, a typical machine makes something like 200 feet of it a day.
The same glossary describes a look-alike, false or seamed snake chain, made by compacting a curb chain into a tube. On a well-made one the seam can't be picked out by eye, and because there is more metal in it, it is heavier than true snake. Not sure which one you have? Describe it in the on-site chat for a free quote before you book.
How snake chains kink and break
- Kinks. The plates are packed so tightly that a snake chain bends smoothly only in a gentle curve. Folded sharply or caught on something, the plates at the fold are forced out of line and leave a crease that won't lie straight. That is why it should hang or lie in a long, loose loop rather than be coiled into a small box, and come off for sleep and exercise.
- Breaks. It tends to part at a strained kink, a snag, or the end cap that joins the clasp.
- Repairs need a light touch. In a Ganoksin forum thread about soldering cast end caps onto 1.6mm snake chain, the jeweler asking found that about 10mm of chain next to the end cap went stiff, which that jeweler later put down to the heat. Replies note that thin chain heats quickly and lets solder flow up between the plates, so they keep the solder to a minimum and clamp steel tweezers on the chain as a heat sink. For kinks, another jeweler on the forum has had the best results cutting out the damaged section and rejoining the ends with very little heat.
- Knots. If it knots, lay it flat and don't pull, which is how kinks and breaks happen. Chain Untangling is $15 for the first item.
Signs your snake chain needs work
- A break, or a section pulling apart: Chain Soldering.
- The spring ring or lobster won't close, or opens when you tug the chain: Clasp Replacement.
- The chain is too long for the pendant: Chain Shortening.
- A kink, a flattened section, or a clasp end pulled out of its cap. There's no set-price repair for these, so describe the damage in the on-site chat for a free quote, or send the chain for the Mail-In Evaluation, $19 and credited in full if you go ahead; see whether a kinked snake chain can be repaired. Meanwhile, stop wearing it and don't keep flexing the crease.
Snake chain vs herringbone and box chain
Herringbone is the chain most often confused with snake: both are smooth, show no open links and kink. The MJSA glossary says herringbone starts out as a double or triple rope chain; the finished chain lies flat in angled rows, while snake is usually round (square snake chains exist too). Hollow chains, common in herringbone styles, are laser welded rather than torch-soldered here, because a torch's heat can collapse them.
Box chain, also known as Venetian, is a run of small square links you can see, rather than a closed tube. At the bench, box adds nothing to Chain Soldering while snake adds $13, and Chain Lengthening lists box (+$10) but not snake.
What it costs here
Snake is a +$13 chain type on both Chain Soldering and Chain Shortening, so one break in 18K yellow gold is $62 ($30 + $7 + $12 + $13). Each price includes a clean and polish and the 1-year workmanship guarantee. The chain soldering cost guide explains what else moves the price, and the answer on repairing a broken or kinked snake or box chain compares snake and box prices metal by metal.
A gold snake chain travels to the New York studio in a plain box with nothing on the outside naming the contents, signed for both ways. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Chain Soldering | from $43 snake | The break closed with matching solder and finished flush. 14K yellow gold is $54 ($30 + $7 + $4 + $13) and 14K white gold $61 ($30 + $14 + $4 + $13). Two breaks add $17, three add $35. |
| Chain Shortening | from $57 snake | Length removed at the clasp end, the clasp re-soldered, and the removed piece returned to you. 14K yellow gold is $63 ($44 + $6 + $13); 2mm adds $5 and 3mm adds $10. |
| Clasp Replacement | from $48 | A spring ring, lobster or box clasp fitted to the chain's gauge, soldered on and action-tested, or the original repaired. A medium silver lobster is $76 ($48 + $28). |
| Mail-In Evaluation | $19 | For a kinked or flattened snake chain, or a clasp end pulled out of its cap: a jeweler examines it under magnification and sends an itemized quote with photos before any work. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Are snake chains strong?
How is a snake chain made?
Why is a snake chain harder to repair than other chains?
How do I store a snake chain so it doesn't kink?
Can a snake chain be made longer?
See also
All glossary terms · Repair questions · How online jewelry repair works