Chains & clasps
Spring ring clasp
A spring ring clasp is a small, round chain clasp held shut by a spring sealed inside it. Pull back the little tab on its side and part of the ring slides open; release it and the opening closes around the end ring of the chain. Fine, lightweight chains usually come with one.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How a spring ring clasp works
The clasp is a hollow ring of metal with a coiled spring inside and a small tab sticking out through a slot in its side. Drawing the tab back pulls one segment of the ring into the hollow and leaves an opening; when you let go, the spring drives that segment forward until the circle is whole again. A small fixed loop on the outside joins the clasp to one end of the chain, either soldered on or through a jump ring, and the other end of the chain finishes in a plain ring or tag for the clasp to catch.
Spring rings are sized by diameter. Our Clasp Replacement page groups them as small (0 to 5 mm), medium (5.5 to 7 mm) and large (7.5 to 12 mm), and the bench picks the band that suits the chain's gauge and weight, not the biggest one that will go on. Every replacement is action-tested before it ships, and the whole chain, end ring included, is cleaned and inspected.
How it wears or fails
- The spring weakens. The coil inside is tiny and is compressed every time the clasp opens, so after enough use it loses its snap. You'll see the moving segment return slowly, or stop before the circle closes.
- It opens under strain. A spring ring's small opening and light spring are made for delicate chains. On a heavy chain, or when a caught chain is pulled hard, enough pressure on the moving segment can push it open, which is why heavier chains are usually given a lobster clasp.
- The tab bends or snaps. It's small and can be awkward to work, and a bent or broken tab leaves the opening stuck or unusable.
- The rings at either end wear. The clasp's fixed loop and the end ring it hooks into rub on each other. A loop worn thin, or a jump ring that has opened, lets the chain fall even when the clasp itself is fine.
How to tell your clasp needs attention
Open the clasp, let the tab go slowly a few times, and look at the gate from the side.
- The gate creeps back, stops halfway or leaves a visible gap.
- It closes, but light pressure on the outside of the gate pushes it open.
- The tab is bent, loose or missing.
- The loop joining clasp and chain, or the end ring, looks thin, oval or open.
- You've found the necklace undone more than once, or caught it sliding off.
Don't force a sticking spring ring with pliers or glue the gate shut; neither puts the snap back in the spring. A jump ring pinched shut at home is the same open seam that failed the first time; solder is what turns it into a closed loop.
Spring ring vs lobster clasp
Both close on an internal spring. A spring ring is the small, round, low-profile option, made for light chains and delicate pendants. A lobster clasp is larger, opens with a lever on its side, and is easier to work with one hand; its sturdier mechanism is the usual pick for heavier necklaces and bracelets. Our bench follows the same logic: the smallest spring rings (0 to 5 mm) go on fine chains, and a heavy chain such as a Cuban link gets a lobster instead.
In small sizes, price isn't a reason to keep a spring ring: in silver a small lobster costs the same $48, and in gold it costs less, $67 against $76 in 14K yellow ($48 + $19 vs $48 + $28) and $69 against $78 in 14K white ($48 + $21 vs $48 + $30). In medium and large sizes the spring ring costs less: in silver, $58 against $76 for a medium lobster ($48 + $10 vs $48 + $28) and $68 against $82 for a large ($48 + $20 vs $48 + $34). The toggle clasp and magnetic clasp entries cover two other ways to fasten a chain.
Repair or replace?
When the spring has worn out, a new clasp is usually the sound fix. The old one comes off at its solder joint, and a new one sized to your chain is soldered in place rather than hung on a jump ring squeezed shut, then tested and polished at the joins. If the clasp itself matters, say it's signed or from an antique piece, choose "Repair my clasp" and the original mechanism is rebuilt instead when it's salvageable. Repair and replacement are priced the same on the Clasp Replacement page.
On a pearl strand, the clasp is part of the stringing: Pearl Restringing (from $15 plus $4 per inch) adds a new clasp for $25 and restrings the pearls in their original order on silk or synthetic cord.
What it costs here
Prices from the live Clasp Replacement page, Nov 18, 2026. The base is $48, and the spring ring's size and metal set the rest:
- Sterling silver: $48 small, $58 medium ($48 + $10), $68 large ($48 + $20).
- 14K yellow gold: $76 small ($48 + $28), $86 medium ($48 + $10 + $28).
- 18K yellow gold: $81 small ($48 + $33).
- 14K white gold: $78 small ($48 + $30); 18K white gold: $83 small ($48 + $35).
- Not sure what you have? Choose "Other" or "Not sure"; the jeweler confirms on arrival, and you approve any price change first.
If the end ring or a joining ring failed, Jump Ring Repair is $19 in silver and $31 in 14K yellow gold ($19 + $7 + $5). A break elsewhere in the chain is Chain Soldering, from $30. Rush is $50. Every repair includes a clean and inspection of the whole chain and the 1-year workmanship guarantee.
Shipping is $30 round trip per order by UPS; full-value coverage for a $1,000 chain is $22.50 (shipping and insurance). Your chain is photographed on arrival at our New York studio and before it ships back, and a second jeweler checks the work. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Prices at a glance
| Service | Price | What's included |
|---|---|---|
| Clasp Replacement (spring ring) | from $48 small, silver from $58 medium, silver from $68 large, silver from $76 small, 14K yellow gold |
The failed clasp removed at its solder joint and a new spring ring, sized to the chain's gauge and weight, soldered on and tested through its full open-close action; or your original repaired. The whole chain is cleaned and inspected. |
| Clasp Replacement (switch to a lobster) | from $48 small, silver from $76 medium, silver from $82 large, silver from $67 small, 14K yellow gold |
For a heavier chain, or a bracelet you'd rather fasten with one hand: a lobster clasp sized to the chain, soldered on and action-tested. |
| Jump Ring Repair | from $19 | The end ring the clasp hooks into, or a ring joining clasp and chain, soldered closed or replaced with a heavier one. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Can a spring ring clasp be fixed?
How much does it cost to replace a spring ring clasp?
Are spring ring clasps secure?
Why does my spring ring clasp keep opening?
What size spring ring clasp do I need?
See also
All glossary terms · Repair questions · How online jewelry repair works