Chains & clasps

Magnetic clasp

Pliers fitting a new lobster clasp to a gold chain over green bench cloth

A magnetic clasp is a necklace or bracelet closure made of two metal end pieces with small, strong magnets inside that pull together and hold when brought close. There is no spring or hook to work, which makes it easy to fasten with stiff fingers, but nothing locks it shut, so a hard snag can pull it apart.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

How a magnetic clasp works

A magnetic clasp has two halves, one on each end of the chain, cord or strand. Each half holds a magnet set in a small metal cap or cup. Bring the ends close and they snap together; pull them apart and they release. Many are built around neodymium, or rare-earth, magnets, which pack a lot of pull into a very small size, and jewelry clasps are one of their everyday uses. Bare neodymium corrodes easily, so the magnets are plated, most often with nickel or a nickel-copper-nickel sandwich.

Nothing mechanical holds a plain magnetic clasp shut, only the magnets' pull, so a hard enough snag on a coat collar or a bag strap can separate it. Some designs add a mechanical backup, such as a small safety latch.

Who they suit, and the trade-offs

  • Easy to fasten. No tiny lever or spring to work, so they suit stiff or arthritic fingers and anyone who struggles with a clasp at the back of the neck. See the easiest necklace clasps for arthritis.
  • Less secure under strain. A hard snag can separate them, so they are a weaker choice for a heavy pendant or a necklace you couldn't bear to lose.
  • Heart devices. Magnets can temporarily change how a pacemaker or implanted defibrillator works. Medtronic advises keeping jewelry with magnetic closures at least 6 inches (15 cm) from the device, and a necklace clasp can slide round toward the chest during the day. Ask your device clinic if you're unsure.
  • Young children. Small strong magnets are a swallowing hazard: children who have swallowed several have had sections of the digestive tract pinched between them. Keep a loose magnet or a broken clasp well out of reach.

How magnetic clasps wear or fail

  • The magnet comes loose. Where a magnet is glued into its cap, the glue can let go, and the magnet rattles or drops out.
  • A chipped or cracked magnet. Strong magnets that strike each other can chip or even shatter, so letting the two halves slam together can damage them.
  • Corrosion. Once a chip or scratch breaks the plating, sweat and water reach the magnet, which corrodes and weakens.
  • Worn caps. On plated clasps, the plating wears through where the halves rub together.
  • The connection fails, not the magnet. The small ring, crimp or glued end that joins the clasp to the chain or cord opens or pulls loose.

If a clasp starts holding weakly, wipe the faces first, since grime or a hair weakens the hold; then look for a chip, dark powdery corrosion, or a magnet that has shifted or sunk in its cap.

Why they're tricky to repair

Heat and magnets don't mix. Neodymium magnets start losing strength once they pass roughly 100 °C (212 °F) and lose their magnetism altogether at around 320 °C (608 °F). Jewelry is joined with hard solders, which by definition melt above 450 °C (840 °F), so the usual bench fix of soldering a joint or a jump ring right next to the clasp can ruin the magnet. The magnet has to come out first, or the joint has to be made in a way that keeps heat away from it, and which is possible depends on how that particular clasp is built.

That is why a magnetic clasp isn't one of the clasp styles with a set price here. If you like the magnetic clasp and want it repaired or replaced like for like, start with the Mail-In Evaluation ($19, credited in full toward the repair): a jeweler photographs the piece, examines the clasp and its connections under magnification and sends an itemized quote with photos before any work. If you'd rather have a closure that doesn't depend on a magnet, Clasp Replacement fits a mechanical one to a sterling silver or solid gold chain at a set price.

Magnetic clasp vs box clasp (and other clasps)

Magnetic clasps are often mistaken for box clasps, because both can look like a neat rectangular block when closed. A box clasp is mechanical: a folded metal tongue slides into a box and springs open inside it to lock, often with a small figure-eight safety catch on the side, and you release it by pressing the tongue. A magnetic clasp has no tongue and no catch; it simply pulls together.

The everyday mechanical alternatives are the spring ring, a small round clasp that won't overwhelm a fine chain, and the lobster clasp, a spring-loaded hook that comes in sizes strong enough for a heavy chain. A toggle clasp, a bar that passes through a ring, is the other easy-to-use design, though it relies on the necklace's tension to stay closed.

What it costs here

Prices from the live repair pages, Nov 18, 2026:

  • Swap a magnetic clasp for a mechanical one on a sterling silver or solid gold chain: Clasp Replacement, from $48. A small spring ring or small lobster in sterling silver is $48; a medium lobster in silver is $76 ($48 + $28); a small lobster is $67 in 14K yellow gold ($48 + $19) and $69 in 14K white gold ($48 + $21); a small box clasp in silver is $130 ($48 + $82). The new clasp is soldered on, not just pinched closed on a jump ring, and tested through its full open-close action.
  • Plated, steel or base-metal chains need solder work that goes to a free quote, or start with the $19 Mail-In Evaluation.
  • Repair or replace the magnetic clasp itself, including one on a cord or beaded strand: the $19 Mail-In Evaluation, credited in full toward approved work.
  • Restringing pearls anyway? Pearl Restringing can add a new clasp for $25 while the strand is apart (clasp type confirmed with the jeweler before work).

Shipping is $30 round trip by UPS per order. Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989, runs JewelryRepair.com. At its New York studio the clasp and its connections are photographed on arrival and again before the piece ships back.

Prices at a glance

Service Price What's included
Clasp Replacement from $48 On a sterling silver or solid gold chain, the magnetic clasp is removed and a spring ring, lobster or box clasp sized to the chain is soldered on and tested through its full open-close action. Small lobster in 14K yellow gold $67; small box clasp in silver $130. Plated, steel or base-metal chains need solder work that goes to a free quote.
Mail-In Evaluation $19 For the magnetic clasp itself (a loose or missing magnet, a cracked cap, a weak hold), including one on a cord or beaded strand: examined under magnification, itemized quote with photos, credited in full toward approved work.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Are magnetic clasps secure?
Less secure than a mechanical clasp, because only the magnets' pull holds them shut and a hard snag can separate them. For a heavy pendant or a piece you can't replace, a lobster or box clasp is the safer choice. At JewelryRepair.com, Clasp Replacement fits one to a sterling silver or solid gold chain, from $48 for a small lobster or spring ring in silver.
Can you wear a magnetic clasp with a pacemaker?
Only with care, and check with your device clinic. Magnets can temporarily change how a pacemaker or defibrillator behaves, and Medtronic advises keeping jewelry with magnetic closures at least 6 inches (15 cm) from the device. A necklace clasp can slide toward the chest, so a mechanical clasp avoids the question: a lobster or spring ring fitted at JewelryRepair.com starts at $48 in silver.
Can a magnetic clasp be repaired?
Sometimes; it depends on what failed and how the clasp is built. A loose magnet, a chipped magnet, a worn cap and a broken connection are each fixed differently, and soldering heat can ruin a magnet, so the clasp has to be examined first. At JewelryRepair.com that starts with the $19 Mail-In Evaluation, credited in full: you get an itemized quote with photos and approve it before any work.
Can I replace a magnetic clasp with a lobster clasp?
Yes, on a sterling silver or solid gold chain. Clasp Replacement removes the magnetic clasp and solders on a lobster, spring ring or box clasp sized to your chain, then tests it through its full action. A small lobster or spring ring in sterling silver is $48 and a small lobster in 14K yellow gold is $67. Plated, steel or base-metal chains need solder work that goes to a free quote, or start with the $19 Mail-In Evaluation.
Can a magnetic clasp be added to my necklace?
It depends on the chain's ends and the clasp; there's no set price for fitting one here, so it starts with the $19 Mail-In Evaluation, credited in full toward approved work: a jeweler examines the chain and its ends, tells you whether it can be done, and sends an itemized quote with photos before any work. Clip-on magnetic converters that hook onto an existing clasp skip the bench, but they add another connection that can open or pull loose.
Do magnetic clasps lose strength over time?
They can. When one stops holding, the cause is usually grime or a hair between the faces, a chipped or corroded magnet, or a magnet that has shifted in its cap. Heat weakens them too: neodymium magnets start losing strength above roughly 100 °C (212 °F). Wipe both faces clean first; if it still slips apart, the $19 Mail-In Evaluation tells you whether it can be fixed, or Clasp Replacement swaps it for a mechanical clasp from $48.

All glossary terms · Repair questions · How online jewelry repair works

Sources