Chains & clasps

Bail (pendant bail)

Gold medallion pendant hanging from its bail on a fine chain

A bail is the loop or fitting at the top of a pendant that the chain passes through. It may be soldered to the pendant, joined to it by a small jump ring, hidden on the back, or clipped on with a hinge. Because the chain slides through it every day, a bail slowly wears thin from the inside.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

What a bail is

A bail (sometimes spelled bale) is the part of a pendant that the chain runs through. It carries the pendant's whole weight and lets it hang and swing. On a classic bail the chain passes through the bail and a small ring joins the bail to the pendant. A hidden bail is attached to the back of the pendant, so from the front the pendant seems to sit on the chain by itself. Many fine-jewelry pendants have a fixed bail: a loop soldered on or formed as part of the piece.

Other designs hold the pendant without solder. A pinch bail, also called an ice-pick or prong bail, has two small prongs that grip a stone or bead through a hole drilled across its top. Glue-on bails have flat pads bonded to the back of an undrilled stone. Hinged or interchangeable bails, often sold as enhancers, open with a snap or magnetic closure so one pendant can move between necklaces.

How a bail wears or fails

A bail wears from the inside. Every time you move, the chain slides across the top inner curve of the loop, metal against metal, and over the years that spot gets thinner than the rest of the bail. A heavy pendant on a fine chain wears it faster, because more weight presses on one small point of contact. Eventually the thin spot cracks, the loop bends open, or the bail pulls oval and the pendant starts to hang crooked.

The joints fail too. The solder seam where a fixed bail meets the pendant can crack, and on a classic bail the small connecting ring is often the first thing to open, since it is often a loop of wire whose seam was only pressed shut, not soldered (see jump ring). Pinch bails loosen when their prongs spread in the drill hole, glue-on bails let go when the adhesive ages, and the clip of a hinged enhancer can wear until it no longer stays shut.

How to tell a bail needs attention

  • The inside top of the loop looks thin. Hold the pendant up to a light and compare the top of the bail with its sides. A flat, shiny, narrowed spot is wear from the chain.
  • The pendant hangs crooked or faces sideways. The bail has bent, or the joint between bail and pendant has cracked.
  • You can see a gap or a line. A hairline crack across the bail, or a gap in the ring under it, means it can open under a tug.
  • A drilled stone or bead moves on its pinch bail. The prongs no longer grip, and the stone can slip out.
  • The chain's clasp won't pass through. A closed bail has to fit over the clasp or end ring of the chain; if it doesn't, the bail is too small for that chain.

If you find any of these, take the pendant off that chain until it has been checked.

Bail vs jump ring

People often call any loop at the top of a pendant a jump ring, but the two parts do different jobs. A jump ring is a small circle of wire with one cut seam, used to connect two parts. A bail is the larger fitting shaped for the chain to pass through, usually a soldered or cast loop that carries the pendant's weight. Many pendants use both: the chain runs through the bail, and a jump ring links the bail to the pendant.

When a pendant falls off, check which one let go. If the bail is still on the pendant but the ring beneath it is open or missing, the jump ring failed: Jump Ring Repair solders it closed or replaces it, from $19. If the bail itself has split, worn through or pulled away, that is Bail Repair, from $39.

When the bail is too small, or missing

A pendant with a closed bail goes onto a chain by threading the chain's end through it, so the clasp or end ring has to fit through the bail. Moving a pendant to a heavier chain sometimes means it no longer fits. Fitting a larger bail changes the pendant rather than repairing a worn part, so it isn't booked as Bail Repair: start with a free quote, the $10 Custom Work & Modifications estimate, or the $19 Mail-In Evaluation, credited in full. Either way, a jeweler confirms whether a larger bail suits the pendant and sends the price before any work. More in what to do when a bail is too small for your chain.

A piece that never had a bail, such as a brooch or coin you want to wear as a pendant, is also a Custom Work job, quoted from your photos before anything ships (see adding a bail to a pendant).

What bail repair costs here

At JewelryRepair.com, Bail Repair is $39 in sterling silver, whether the bail is soldered, rebuilt or replaced. Yellow gold adds $20, white or rose gold $22 and platinum $137; 14K adds $4 and 18K $10. So a 14K yellow gold bail is $63 ($39 + $20 + $4) and an 18K white gold bail is $71 ($39 + $22 + $10). A full polish of the whole pendant adds $21, rhodium plating $44 and rush $50, which ships the piece back 2 to 3 days sooner. White gold solder jobs include rhodium on the repaired area.

Shipping is $30 round trip by UPS per order, with a prepaid label ready in your account and $100 of coverage each way; a $1,000 pendant can be covered for its full value both ways for $22.50 (2.5% of the $900 above $100). JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989.

What it costs here

Service Price What's included
Bail Repair from $39 sterling silver
from $63 14K yellow gold
from $65 14K white gold
A cleanly split bail soldered and re-rounded on a mandrel, or a bail worn paper-thin rebuilt or replaced with a new one matched to the pendant's metal, scale and style. A full polish of the whole pendant adds $21, rhodium plating $44, rush $50.
Jump Ring Repair from $19 When the small ring between the pendant and its bail has opened: soldered closed into a continuous loop, or replaced with a heavier ring if it is stretched or thin.
Charm & Pendant Soldering $69 A pendant or charm attached permanently by soldering or laser-welding the connecting link closed, so it still swings but cannot come off. Broken charm loops can be rebuilt.
Custom Work & Modifications $10 For a piece that never had a bail, such as a brooch you want to wear as a pendant, or a bail you want made larger for a heavier chain: add photos, and a jeweler quotes the work line by line before anything ships.
Mail-In Evaluation $19 For a pinch, glue-on or hinged bail that has come loose, or damage you can't name: the whole piece examined under magnification and an itemized quote with photos. The $19 is credited in full toward the repair.

Prices come from the live repair pages. Shipping is $30 round trip per order.

Questions

Can a broken pendant bail be fixed?
Yes, a broken pendant bail can be soldered closed or replaced with a matching new bail. A clean split is soldered and re-rounded on a mandrel; a bail worn paper-thin by the chain is rebuilt or replaced to match the pendant's metal, scale and style. At JewelryRepair.com, Bail Repair is $39 in sterling silver and $63 in 14K yellow gold, with $30 round-trip UPS shipping per order.
Why is my pendant hanging crooked or sideways?
Usually because the bail has bent or the joint between the bail and the pendant has cracked, so the pendant no longer hangs from its center. A bail pulled oval by a heavy pendant can do the same. Take the pendant off the chain before a crack opens further. At JewelryRepair.com, Bail Repair re-solders, rebuilds or replaces the bail so the pendant hangs straight, from $39 in sterling silver.
What are the different types of pendant bails?
The main types are fixed bails, soldered on or formed as part of the pendant; classic bails, joined to the pendant by a small ring; hidden bails on the pendant's back; pinch bails, whose prongs grip a drilled stone or bead; glue-on bails for undrilled stones; and hinged enhancer bails that open so a pendant can move between necklaces. They fail differently: soldered bails wear thin, while pinch, glue-on and hinged bails work loose.
What is a pinch bail?
A pinch bail is a bail with two small prongs that press into the hole of a top-drilled stone or bead, so the piece hangs without being soldered to anything. Over time the prongs can spread in the hole and let the stone shift or slip out, so take it off the chain as soon as it moves. At JewelryRepair.com, a loose pinch bail starts with the $19 Mail-In Evaluation, credited in full, and you see the price before any work.
Is it spelled bail or bale?
Bail is the usual spelling for the loop a pendant hangs from, and bale is an alternative spelling of the same word; both name the same part. Because bail also has a legal meaning, jewelers often say pendant bail or necklace bail to be clear. Whichever spelling you use, a worn or cracked one is Bail Repair at JewelryRepair.com, from $39 in sterling silver.
How much does it cost to replace a pendant bail?
At JewelryRepair.com, Bail Repair costs $39 in sterling silver, $59 in 10K yellow gold, $63 in 14K yellow, $65 in 14K white or rose, $71 in 18K white or rose and $176 in platinum. The price is shown on the repair page before you pay. A full polish of the whole pendant adds $21, rhodium plating $44 and rush $50, and UPS shipping is $30 round trip per order, however many pieces are in the box.

See also

All glossary terms · Repair questions · How online jewelry repair works

Sources