Repair questions · Earrings & pendants

My pendant's bail is too small for my chain. Can it be made bigger?

Usually, yes, by replacing it rather than stretching it. A jeweler can fit a new, larger bail matched to the pendant's metal so your chain and its clasp pass through. First check whether the chain's smaller end ring fits, or try a slimmer chain. Bail Repair at JewelryRepair.com is $39 in sterling silver, $63 in 14K yellow gold.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$39Bail Repair in sterling silver: a larger bail matched to the pendant
$63Bail Repair in 14K yellow gold ($39 + $20 + $4)
$30round-trip UPS shipping per order: send the pendant and chain in one box
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Find out what won't fit. It's usually the clasp, sometimes the chain's end ring, and only occasionally the chain itself.
  • Free fixes first: feed the chain's smaller end ring through the bail, or wear a slimmer chain that's still strong enough for the pendant.
  • If the chain itself is too thick, the bail is replaced with a larger one, not stretched.
  • At JewelryRepair.com: Bail Repair is $39 in sterling silver and $63 in 14K yellow gold.

Prices

Service PriceWhat's included
Bail Repair from $39The permanent fix: the small bail replaced with a new one matched to the pendant's metal, scale and style. Tell us in your order note which chain it must fit, and send that chain. White gold solder work includes rhodium on the repaired area.
Clasp Replacement from $48When the chain fits through the bail but its clasp doesn't: a clasp sized to the chain's gauge and weight, soldered on and action-tested. A small spring ring in silver is $48; in 14K yellow gold, $76 ($48 + $28).
Custom Work & Modifications $10An enhancer (clip-on) bail, a larger ring added under the bail, a stone-set bail, or a pendant that hangs from a hidden bail: a jeweler reviews your photos and quotes the work line by line before anything proceeds.
Mail-In Evaluation $19Not sure which fix suits your pendant? An examination under magnification and an itemized quote with photos, credited in full.

First, find out exactly what won't fit

A closed bail goes on a necklace one way: one end of the chain is threaded through it. So what matters is the widest part that has to pass through, and that's rarely the chain. Rio Grande's chain guide for jewelers makes the point directly: choose a chain width and thickness that accommodates a suitably sized bail, and if you buy finished chain, make sure its end ring will fit through your bail. The same guide measures chain width across the outside of its widest link.

  • The clasp won't pass, but the end ring does. Thread the end-ring end through first. No repair needed.
  • Neither end passes, but the chain body would. The ends are the problem. A smaller clasp, or a bigger bail, solves it.
  • The chain itself is thicker than the opening. Only a bigger bail, an enhancer bail or a different chain will do.
  • The "bail" is really a small ring. Some pendants hang from a jump ring rather than a bail, and the chain runs through that ring. Mention it in your order so the jeweler quotes the right fix.
  • It's a hidden bail. Wikipedia describes a hidden bail as one connected to the back of the pendant so the chain can pass through it. Its opening is part of the pendant's construction, so enlarging it is a modification, not a quick swap.

The quickest check is the actual chain you want to wear; it answers the question in seconds.

Your options, from free to bench work

  • 1. Thread it from the other end. Clasps are usually the bulkiest part of a chain; the end ring at the other end is often smaller. It costs nothing to try.
  • 2. Choose a different chain. Rio Grande's guide tells jewelers to choose a chain with the strength to support the weight of the pendant, and calls box chain sturdy and ideal for pendants. Go slimmer only as far as the pendant's weight allows.
  • 3. Add a larger ring under the bail. A soldered ring through the existing bail gives the chain a bigger opening; the pendant hangs slightly lower. Adding one is quoted through Custom Work from a $10 estimate; an existing small ring that has opened or worn thin is Jump Ring Repair, from $19. More on pairing in whether a pendant goes on any chain.
  • 4. Fit a smaller clasp. Clasp Replacement fits a clasp matched to the chain's gauge and weight; the configurator lists small spring rings at up to 5 mm. On a heavy chain, a smaller clasp trades away security.
  • 5. Clip on an enhancer bail. An enhancer is a hinged bail that opens and snaps shut around the necklace. See what an enhancer bail is; adding one is quoted through Custom Work & Modifications from a $10 estimate.
  • 6. Replace the bail with a larger one. The permanent fix, and the one that keeps the pendant at its original height. That's Bail Repair, from $39.

Why a jeweler replaces a small bail instead of stretching it

  • The metal has to come from somewhere. Opening a loop up on a mandrel makes it longer around, and that extra length comes out of its thickness, on the part that carries the pendant's whole weight.
  • Working metal makes it less forgiving. Wikipedia's work hardening article explains that permanent deformation raises a metal's strength but lowers its ductility. A bail that has been bent open, and perhaps squeezed back before, can crack instead of stretching. Annealing reverses the hardening, but it means heating the pendant, which isn't always safe.
  • Heat and stones don't mix. Stones near the bail have to be identified, and often removed, before a torch goes near them.
  • Some bails can't change shape at all. A stone-set, hinged or enameled bail would lose stones, stop closing or chip.

A new bail sidesteps all of that: full-thickness metal and the right opening.

How a jeweler fits a bigger bail

At the New York studio of JewelryRepair.com, the pendant is photographed on arrival. Then:

  • The chain decides the size. Send the chain you plan to wear and name it in your order note, so the new bail's opening clears its clasp. Bigger isn't automatically better: a bail far larger than the chain lets the pendant slide and turn around. See why a pendant keeps flipping.
  • The style is matched to the pendant, from a delicate fixed bail for a solitaire to a heavier hinged bail for a substantial piece.
  • The old bail comes off at its joint, and the new one is soldered or laser-welded on where the pendant balances, so it hangs straight; near stones or enamel a laser keeps the heat at the joint (see laser welding vs soldering).
  • Finished and checked. The pendant is cleaned and polished, white gold solder work includes rhodium re-plating of the repaired area, a second jeweler checks the work, and it's photographed again before it ships back.

What it costs at JewelryRepair.com

Bail Repair is priced by metal and karat in the configurator, which shows the exact total before checkout; each price includes a clean and polish and the 1-year workmanship guarantee.

  • Bail Repair: sterling silver $39; 14K yellow gold $63 ($39 + $20 + $4); 18K yellow gold $69 ($39 + $20 + $10); 14K white or rose gold $65 ($39 + $22 + $4); platinum $176 ($39 + $137). Rhodium plating is an optional $44 add-on; white gold solder work already includes rhodium on the repaired area.
  • Jump Ring Repair, for an existing ring between pendant and chain: $19 in sterling silver, $31 in 14K yellow gold ($19 + $7 + $5).
  • Clasp Replacement: a small spring ring or small lobster in silver, $48; a small spring ring in 14K yellow gold, $76 ($48 + $28); a small lobster in 14K yellow gold, $67 ($48 + $19).
  • Enhancer bails, an added ring, stone-set or hidden bails: Custom Work, starting with a $10 estimate from your photos and a line-by-line quote before anything proceeds.
  • Not sure: the Mail-In Evaluation, $19, credited in full.

Before you ship

  • Send the pendant together with the chain it has to fit. A second chain you're deciding between rides along at no extra cost, since shipping is $30 round trip per order by UPS, however many pieces are in the box.
  • In your order note, name the chain the bail should fit and mention any stones, enamel or plating on the pendant.

The prepaid label is in your account, and coverage options are on shipping and insurance. Over 50,000 repairs since 1989 have passed through the bench of Sky Jewelry, the family jewelers on Lenox Avenue behind JewelryRepair.com. A bench jeweler does the work and a second jeweler checks it.

Questions

How do I know what size bail I need?
Big enough for the widest part that has to pass through it, which is usually the clasp, not the chain. Rio Grande's chain guide tells jewelers to make sure a finished chain's end ring fits through the bail, and measures chain width across the outside of its widest link. The surest test is the chain itself, or send the pendant and chain together so a new bail is sized to that chain.
Can a jeweler stretch a bail to make it bigger?
Not usually, and a stone-set or hinged bail not at all. Stretching takes the extra size out of the loop's thickness, on a part the chain has already worn thin from the inside, and working the metal makes it harder and less ductile. Replacing the bail is the reliable fix: Bail Repair at JewelryRepair.com is $39 in sterling silver and $63 in 14K yellow gold.
Can I put a thicker chain on a pendant with a small bail?
Only if the chain, and the end you thread through, fit the bail opening. If only the clasp is too big, feed the end ring through first or have a smaller clasp fitted; if the chain body is too thick, the bail has to be replaced or an enhancer bail added. A thick chain in a tight bail can also stop the pendant swinging freely, so it twists with the chain.
Can a pendant bail be made smaller?
Yes, the same way: the bail is replaced with a smaller one matched to the pendant's metal, scale and style. An oversized bail lets a pendant slide along the chain and turn around. At JewelryRepair.com that's Bail Repair, from $39 in sterling silver or $65 in 14K white gold ($39 + $22 + $4), with rhodium on the repaired area for white gold solder work.