Jewelry repair questions · Stones & settings

Why does my diamond look cloudy, and can it be fixed?

Most cloudy diamonds are simply dirty: skin oil, soap and lotion stick to the underside of the stone and block the light, and a proper clean fixes that. If it still looks milky afterward, the cause is in the stone or its setting, such as a cloud inclusion, worn rhodium or a damaged filling. JewelryRepair.com's Jewelry Spa starts at $44.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

from $44Jewelry Spa: ultrasonic, steam and hand-polish clean with a written inspection report
$79Rhodium Plating for a 14K white gold ring ($69 + $8 + $2)
$19Mail-In Evaluation, credited in full toward the repair
50,000+repairs since 1989

The short version

  • Usually it's buildup. Diamond is lipophilic and hydrophobic: oil sticks to it and water beads off. Skin oil, lotion and soap coat the facets underneath, and the stone goes gray.
  • The stone itself doesn't fog with age. GIA rates diamond 10 on the Mohs scale and calls it invulnerable to virtually all acids.
  • If a real clean doesn't help, the cause is in the stone or around it: a cloud inclusion, strong fluorescence, a damaged fracture filling, a chip, worn rhodium, or a stone that isn't a diamond.
  • At JewelryRepair.com the Jewelry Spa (from $44) separates dirt from everything else and comes with a written inspection report.

Prices

Service PriceWhat's included
Jewelry Spa from $44Ultrasonic bath, steam and hand polish, with a written inspection report from the bench. A 14K ring: $59 in yellow gold ($44 + $10 + $5), $68 in white or rose gold ($44 + $19 + $5). If your diamond is fracture filled, say so before booking: GIA warns that too long in an ultrasonic cleaner can damage the filling.
Rhodium Plating from $69Polish, clean and a fresh rhodium layer for white gold that has worn yellowish and tints the diamond: $79 for a 14K white gold ring ($69 + $8 + $2), $83 in 18K ($69 + $8 + $6).
The Anniversary Service $199Yearly engagement-ring care: deep clean, magnified inspection, loose stones tightened, re-rhodium on white gold and condition photos. Structural work beyond tightening is quoted separately.
Jewelry Appraisal from $105Written insurance-replacement-value appraisal with photographs. The optional treatment check adds $20 ($125 in all). It is not a lab grading report.
Mail-In Evaluation $19For a suspected chip or damaged filling, or when you just don't know: a jeweler examines the whole ring under magnification and sends photos and an itemized quote. Credited in full toward approved work.

The usual cause: buildup, and why cleaning sometimes seems not to work

A diamond sparkles because light bounces off its lower facets, which sit behind the prongs where a washcloth never reaches. Because oil wets a diamond and water doesn't, a rinse does almost nothing; it takes a mild detergent and a soft brush. The full home routine is in the best way to clean a diamond ring.

Three things explain most "it still looks cloudy after cleaning" complaints:

  • Soap left behind. Dish or hand soap that dries on the stone leaves its own haze. Rinse longer than seems necessary, then dry with a lint-free cloth.
  • Grime packed under a halo or basket. Years of compacted residue under the stone can need an ultrasonic bath and steam to break loose.
  • A dull setting. Scratched metal around the stone stops looking bright even when the diamond is clean, and the eye reads the whole head as cloudy.

If it came on right after a repair, a machine clean or a knock, read on.

Causes a clean can't fix

  • A cloud inclusion. GIA defines a cloud as many tightly grouped pinpoints, too small to distinguish individually, that together have a hazy appearance. It formed with the diamond; check the clarity plot on your grading report. On GIA's scale, inclusions in the I1 to I3 grades are obvious and may affect transparency, brilliance and durability.
  • Strong fluorescence. GIA reports that fewer than 0.2% of fluorescent diamonds look hazy or oily, when strong fluorescence combines with nano-inclusions. It's rare and permanent.
  • A damaged fracture filling. Some diamonds have surface-reaching fractures filled with high-lead glass so the fracture is less apparent. GIA says heat, changes in air pressure and chemicals can all affect the appearance of filled gems, and a separate GIA article warns that too long in an ultrasonic cleaner can damage the filling. Cloudiness right after torch work or a machine clean is a clue.
  • A chip or a break. Diamond is the hardest gem but not unbreakable: GIA notes a hard blow can still cleave it. A fresh chip, or a feather (GIA's term for a break in a stone, often white and feathery), reads as a white patch no cleaning removes.
  • A yellow look from the metal. GIA describes a diamond's facets as tiny mirrors reflecting their surroundings. White gold's bright white is a thin rhodium plating that wears away, and as the head warms in tone, so does the stone; GIA also notes yellow gold prongs can impart some yellow to a diamond. Our rhodium plating cost guide covers the fix.
  • It isn't a diamond. GIA notes cubic zirconia yellows over time; see how to tell if a diamond is real.

How a jeweler works out which cause it is

  • Gentle clean first. GIA's 1987 durability study calls warm, soapy water and a soft brush the safest method, and the only one recommended until a stone's identity is known.
  • Check before the machines. GIA says professionals examine jewelry for loose stones before using ultrasonic or steam cleaners, since both can loosen stones; then the machines clear what a brush can't reach.
  • Look again under magnification. If the haze remains, it shows whether it sits inside the stone (a cloud, a feather), on the surface (a chip, scuffed facets) or in the metal (worn rhodium, scratched prongs). GIA notes a qualified gemologist can usually recognize filled gems with magnification.

What it costs at JewelryRepair.com

Every repair already includes a clean and polish; these are the live prices (Nov 18, 2026) when cloudiness is the whole problem.

  • Clean and inspect: Jewelry Spa, $59 for a 14K yellow gold ring ($44 + $10 for yellow gold + $5 for 14K), $68 in 14K white or rose gold ($44 + $19 + $5). Platinum isn't listed by name: choose "Other / not sure" (from $44) and the jeweler confirms on arrival, or ask for a free quote on the contact page.
  • Yellowish white gold: Rhodium Plating, $79 for a 14K white gold ring ($69 + $8 + $2) or $83 in 18K ($69 + $8 + $6), including the polish and clean that come first.
  • Yearly engagement-ring care: The Anniversary Service, $199, including re-rhodium on white gold.
  • A question about the stone itself: Jewelry Appraisal from $105, or $125 with the treatment check ($105 + $20). It isn't a lab grading report; for clarity and fluorescence grades, a gem lab is the source.
  • A suspected chip or damaged filling, or not sure: Mail-In Evaluation, $19, credited in full toward the repair you approve.

Rings are cleaned and inspected at the New York studio of Sky Jewelry, family jewelers on Lenox Avenue since 1989 with over 50,000 repairs since 1989; JewelryRepair.com is its mail-in service. A bench jeweler does the work and a second checks it, the ring is photographed on arrival and before return, and the work carries our 1-year workmanship guarantee. Shipping is $30 round trip by UPS, with a prepaid label in your account.

When cloudiness can't be fixed, and the alternatives

  • A cloud or strong fluorescence is part of the stone, and nothing at the bench changes it. If it bothers you, the realistic choice is a different center stone; see can the center diamond be replaced? Diamond Setting labor for one center stone is $102 in 14K white gold ($5 + $60 + $33 + $4).
  • A chipped diamond: whether a chip can be polished out is decided on inspection. Start with the Mail-In Evaluation ($19, credited), which tells you whether a re-polish quote is possible; can a chipped diamond be fixed? covers the options.
  • A damaged fracture filling isn't something we re-treat. Keep the stone away from heat and ultrasonic cleaners, as GIA advises, and start with the evaluation if you want options.
  • Cubic zirconia that has clouded or yellowed is usually replaced rather than restored; see replacing a cubic zirconia.

Questions

Do diamonds get cloudy over time?
No, the stone itself doesn't, but the ring around it does. Diamond is the hardest gem, so ordinary wear doesn't fog it. What builds up is oil, soap and lotion on the facets underneath, plus worn rhodium or scratched prongs around it. A thorough clean usually brings it back; the Jewelry Spa at JewelryRepair.com starts at $44.
Can lab-grown diamonds get cloudy?
Yes, in the same ways a mined diamond can. GIA says lab-grown diamonds have nearly the same chemical, optical and physical properties as natural ones, so the same oily residue clings to them, and their grading reports plot clarity characteristics too. If a lab-grown stone looks hazy, clean it first; if it stays hazy, book the $19 Mail-In Evaluation, credited in full.
Why does my diamond still look cloudy after cleaning?
Usually because soap residue was left on it or grime is packed under the head where a brush can't reach. Rinse longer and dry with a lint-free cloth. If it's still hazy, the Jewelry Spa, a professional ultrasonic and steam clean with a written inspection, is $59 for a 14K yellow gold ring.
Is it normal for a diamond to have black spots?
Often, yes. Many diamonds contain small inclusions: GIA describes a pinpoint as a tiny crystal that looks like a dot at 10x, and dark crystals read as black specks. Check the plot on your grading report. A spot you never noticed before may be dirt or a chip, so clean the ring and, if it stays, book the $19 Mail-In Evaluation.
Can a cloudy diamond be fixed?
If dirt is the cause, yes, with a proper clean. A cloud inclusion or strong fluorescence can't be fixed, because both are part of the stone. Worn rhodium is fixed by replating the metal, $79 for a 14K white gold ring at JewelryRepair.com, while a chip or damaged filling needs a closer look: the $19 Mail-In Evaluation, credited in full.
Why does my diamond look cloudy inside?
Usually because of a cloud inclusion, or rarely strong fluorescence, and both are part of the stone. GIA defines a cloud as many tightly grouped pinpoints that together look hazy; it formed with the diamond, so check the clarity plot on your grading report. Haze that appears suddenly is more often residue under the stone or, on a fracture-filled diamond, a damaged filling. The $19 Mail-In Evaluation tells you which, credited in full.