Bench techniques
Steam cleaning
Steam cleaning is a jeweler's finishing clean: a jewelry steam cleaner fires a jet of pressurized steam at a piece to blast out loosened grime, oils and polishing compound and leave it dry. It usually follows an ultrasonic bath, and its heat makes it unsafe for pearls, opals and fracture-filled emeralds.
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
How steam cleaning works
A jeweler's steamer heats water under pressure and releases it through a nozzle as a concentrated jet of steam. An article on gemstone durability in GIA's journal Gems & Gemology (Summer 1987) describes the steamer as a tool that cleans and dries jewelry with a compressed blast of steam, forcing dirt and oils away from wherever the jet hits, and puts the steam at approximately 300°F (149°C) at 67 psi.
The same article explains what it's for: removing the residue left by cleaning or polishing, and forcing it out of intricate or hard-to-reach work such as filigree. In a two-step clean, the tank does the loosening and the steam does the removing: the jet pushes out whatever the bath shook free and dries the piece in the same pass.
Why it matters for repairs
Steam is where a clean ends and a lot of bench work begins:
- Before plating. Plating copies whatever surface it lands on, so before Rhodium Plating or Gold Plating the piece is polished, then put through ultrasonic and steam cleaning so the new layer bonds to clean metal rather than residue.
- Before inspection. Grime hides worn prongs and hairline cracks. The Anniversary Service steams an engagement ring before every prong and stone is examined under magnification.
Steam can also move stones. GIA's diamond care guide warns that steam can work stones loose in their settings, and says jewelers check pieces for loose stones before steaming them. So a ring that already rattles when tapped, or a stone that shifts under a fingernail, belongs on the setting bench first: Stone Tightening starts at $50 and Prong Re-Tipping at $29 for one to four silver prongs.
What shouldn't be steamed
The risk is heat and sudden temperature change. GIA's care pages are direct about the stones most at risk:
- Pearls: GIA's pearl care page says never to use an ultrasonic or steam cleaner on them; high heat can burn cultured pearls, discolor them, or make them split and crack.
- Emeralds: GIA calls steam risky for emerald. Some estimates put 90% or more of emeralds as fracture-filled; hot steam can make the filler escape, and heat can extend existing fractures.
- Opal: GIA warns that high heat or sudden temperature changes can fracture opal, and that the only safe way to clean it is warm, soapy water.
Beyond those, a bench cleaning chart from a jewelry trade supplier rates tanzanite, topaz, peridot, garnet, turquoise, lapis, malachite and moonstone as never safe to steam. It rates diamond and cubic zirconia as safe, and ruby and sapphire as usually safe. Stones with fractures that reach the surface carry one more risk: the GIA article shows a star sapphire stained by dirt that steam forced into its fractures.
Thermal shock: the main risk
The same 1987 Gems & Gemology article names thermal shock, an abrupt change in temperature, as the greatest potential danger of steaming. Its advice to jewelers shows how much care a safe steam clean takes:
- Bring the temperature up gradually: warm running water, then hot, then the outer fringe of the steam, and only then into the blast.
- Once the stone is used to the heat, use short, frequent blasts.
- Steam a large stone evenly. A blast on one small area heats it and makes it expand faster than the rest of the stone, which can fracture it.
- Give a steamed stone a few minutes to cool before anything else. Moving it straight into the ultrasonic or under running water risks shattering it, because the cooler temperature hits it all at once.
GIA's diamond care guide also lists steam and ultrasonic cleaners among the harsher methods it does not recommend for home use. A kitchen or garment steamer offers none of that control.
Steam cleaning vs ultrasonic cleaning
The two get confused because jewelers use them together. An ultrasonic cleaner fills a tank with liquid, in which high-frequency vibration forms and collapses tiny bubbles that scrub grime loose; its risk is vibration, which can widen fractures and shake a stone loose. A steamer works in open air with heat and pressure, blasting residue out and drying the piece; its risk is heat and thermal shock. Many stones that can't go in the ultrasonic shouldn't be steamed either, and pearls can take neither. For emerald and opal at home, GIA's advice is warm, soapy water.
Where steam fits in our services
Steam isn't sold on its own here. It's one step inside these services, and each page shows its live price:
- Jewelry Spa: steam comes second, after the ultrasonic bath and before the hand polish and written inspection report. A silver ring, earrings or pendant is $44. Gold costs more by metal and karat: $59 for a ring in 14K yellow (yellow gold +$10, 14K +$5) and $68 in 14K white (white gold +$19, 14K +$5).
- The Anniversary Service: $199 for a yearly engagement-ring visit in which the steamed ring is examined under magnification and loose stones are tightened as part of the service.
- Rhodium Plating from $69 and Gold Plating from $60: the ultrasonic-and-steam step is plating prep, not a separate charge.
- Watch Cleaning & Detail: from $185, with the bracelet's links detailed by brush and steam while the case back stays sealed.
If a piece has pearls, opals, emeralds or stones you can't name, say so through the on-site chat or the contact form before you ship. A jeweler confirms everything on arrival, and if the plan changes, you approve it before work begins. Sky Jewelry, family jewelers on Lenox Avenue in New York, has completed over 50,000 repairs since 1989, and its bench handles every clean booked here.
What it costs here
| Service | Price | What's included |
|---|---|---|
| Jewelry Spa | from $44 silver $59 14K yellow gold |
Ultrasonic bath, pressurized steam and a hand polish, with a written inspection report from the bench. Ring, earrings or pendant; a bracelet or necklace adds $12. |
| The Anniversary Service | $199 | Yearly engagement-ring maintenance: cleaned ultrasonically and steamed, every prong and stone examined under magnification, loose stones tightened, white gold re-rhodiumed, condition photos. |
| Watch Cleaning & Detail | from $185 | Bracelet separated from the case, links ultrasonically cleaned, then hand-detailed with brushes and steam. The case back stays sealed. |
| Rhodium Plating | from $69 | Polished to a clean surface, then put through ultrasonic and steam cleaning before a fresh layer of rhodium. Ring or pendant from $69. |
Prices come from the live repair pages. Shipping is $30 round trip per order.
Related questions
Questions
Is steam cleaning safe for a diamond ring?
Can you steam clean pearls?
Is a jewelry steam cleaner safe to use at home?
Should jewelry be steamed before or after an ultrasonic clean?
Can you steam clean an emerald or opal?
See also
All glossary terms · Repair questions · How online jewelry repair works