Jewelry repair questions · Watches

How do you change a watch strap or put a band back on, and when should a jeweler do it?

Lay the watch face down, press each spring bar in with a spring bar tool and lift the strap out, then click the new bars into the lug holes and tug-test. Without a tool, only quick-release and pass-through straps change easily. For stuck bars or a failing band, JewelryRepair.com's band repair starts at $45.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$45 / $95 / $120Watch Band & Strap Repair: rubber / metal ($45 + $50) / leather ($45 + $75)
$19 / $29Link Removal & Addition after fitting a bracelet: one link / two or more
$30round-trip UPS shipping per order, so a plain strap swap is often cheaper done at home
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Most straps hang on spring bars, spring-loaded pins whose tips sit in holes in the case's lugs. Wikipedia notes that strap attachment points are largely standardized, which is why straps can be swapped at all.
  • You need a spring bar tool, a soft surface and a strap made for your lug width in millimeters.
  • Work from the back of the watch, as iFixit's guide does, to avoid scratching the visible face.
  • No tool? Quick-release and pass-through straps change by hand, and drilled lugs release with a blunt pin. Knife tips and paper clips slip.
  • Tug-test both ends after fitting.
  • Under the maker's warranty? Check with the maker first, because outside service can void it.

Prices

Service PriceWhat's included
Watch Band & Strap Repair $45 rubber
$95 metal
$120 leather
When the band itself is failing: metal bracelets get worn pins and collars replaced, loose links tightened or re-pinned and the clasp re-tensioned; leather is restitched and reinforced at the spring-bar holes; rubber is repaired where the material allows. A replacement is quoted if a band can't be saved. Rolex +$100. No rush option.
Link Removal & Addition $19 one link
$29 two or more
After switching to a metal bracelet: links removed evenly from both sides of the clasp with the right tools for that band's pins or screws, removed links returned. Patek Philippe +$10, Rolex +$20.
Mail-In Evaluation $19For a bar that won't release, an attachment you can't identify, or a band you suspect is damaged: examined under magnification, photographed and quoted item by item. Credited in full toward the work you approve.

Know what's holding your strap on

Look at the lugs from the side and below first.

  • Standard spring bars. A tube with a spring-loaded tip at each end, hidden inside the strap. The tool catches a small flange near each tip, the shoulder. See spring bar and watch lugs in the glossary.
  • Quick-release bars. A tiny lever you slide with a fingernail. WatchGecko points out that the strap needs a matching slot for the lever and that most straps don't have one.
  • Drilled lugs. Small holes through the outside of each lug. Pressing the tip in from outside releases the bar without a tool going near the finish.
  • Screw bars. A visible screw head on the side of the lug. The driver has to fit the slot exactly: a slipping blade scars the lug, and a forced screw strips.
  • Pass-through straps. A one-piece strap, such as the nylon NATO style, threads under the bars and behind the case.
  • Metal bracelets. The bars hide inside end links shaped to the case, with a slot where the tool reaches the bar.
  • Integrated bracelets. Bracelets designed as part of the case often fit only that model and aren't a spring-bar job. Ask the maker or a jeweler before taking one apart.

Changing a strap without a tool

The improvised tools people reach for, a knife tip, a small screwdriver, a paper clip, are hard, narrow and not shaped to catch the bar's shoulder, so they slip into the polished side of the lug or the edge of a leather strap. If your watch has standard bars and you change straps often, a spring bar tool is the safer buy. Swapping in quick-release bars only helps if the next strap is cut to take them.

Bracelets, end links and stuck bars

  • Taking a bracelet off. Slide the fork into the end link's slot, catch the bar's shoulder, compress it and ease the end link away from the lug. If only one side releases, free the other tip too rather than twisting the link.
  • Putting it back on. Fit the bar inside the end link, seat one tip in its lug hole, then compress the other and swing the end link into place.
  • A bar that won't compress. The shoulder isn't caught, the bar is bent, or grime has built up in the lug hole. Re-seat the fork so it pushes the shoulder straight toward the middle of the bar instead of levering against the lug. If it still won't move, stop.
  • Leather and thick straps. WatchGecko warns that leather edges are easy to nick with the tool and that lug holes close to the case may not suit a thick strap. Check the fit before you buy.
  • New bracelet too long? That's links, not the strap: see how to remove links from a watch band.

When a jeweler should do it

Bring in help when:

  • A spring bar is stuck or the tool can't reach the shoulder without touching the case.
  • A screw bar won't turn. A stripped head is harder to fix than a stuck one.
  • The bracelet is integrated or the strap is shaped for one model.
  • The watch is valuable or highly polished, and a slip would mean refinishing.
  • The band itself is failing: worn pins and collars, a clasp that won't snap shut, leather split at the spring-bar holes. That is what Watch Band & Strap Repair covers: pins and collars replaced, loose links re-pinned, clasps re-tensioned, leather restitched and reinforced at the holes. See can a broken watch band be repaired?
  • A spring bar has gone missing. See can a watch band pin be replaced?

What it costs at JewelryRepair.com

Honestly, JewelryRepair.com doesn't list fitting a new strap as a stand-alone service, and shipping is $30 round trip per order, so a plain swap on an everyday watch costs less at home or at a local watch counter. Mail-in makes sense when the band needs real repair or something is stuck. Prices from the live repair pages, Nov 18, 2026:

  • Watch Band & Strap Repair: $45 for rubber, $95 for a metal bracelet ($45 + $50) and $120 for leather ($45 + $75). Rolex bands add $100.
  • Link Removal & Addition: $19 for one link and $29 for two or more ($5 base plus $14 or $24), with removed links returned.
  • Mail-In Evaluation: $19, credited in full toward the work you approve. Or send photos through the on-site chat or the contact page for a free itemized quote within 1 business day.

JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by Rolex, Patek Philippe or any other watch brand. It's run by Sky Jewelry, family jewelers on Lenox Avenue who have done over 50,000 repairs since 1989. Each watch is photographed when it reaches our New York studio and again before it ships back; a bench jeweler does the work, a second jeweler checks it, and a 1-year workmanship guarantee covers it. UPS shipping carries a signature at both ends and $100 of coverage each way; covering a $600 watch in full costs $12.50 (2.5% of the $500 above $100) for both directions.

Questions

How do I remove a watch band without a tool?
Only quick-release and pass-through straps are designed to change by hand: slide the small lever on each quick-release bar with a fingernail, or thread a pass-through strap out from under the bars. On drilled lugs, a fine, blunt pin pushed into the hole releases the bar. Standard spring bars need a spring bar tool.
Why won't my spring bar come out?
Usually the tool isn't catching the bar's shoulder, the bar is bent, or grime has built up in the lug holes. Re-seat the fork so it presses the shoulder straight toward the middle of the bar rather than levering against the lug. If it still won't compress, stop: forcing it is how lugs get gouged, and a jeweler can free it with far less risk.
Can I put a leather strap on a watch that came on a bracelet?
Usually, if the watch uses standard spring bars: buy a strap in your lug width and fit it with bars that suit the lug holes. Integrated or case-shaped bracelets may not take an ordinary strap at all. Keep the bracelet, its end links, the original bars and any removed links together so you can switch back.
Will changing my own strap void my watch warranty?
Swapping a strap doesn't involve opening the watch, but warranty terms vary by maker, and scratches made while changing it may not be covered. If the watch is under the maker's warranty or a service plan, read those terms or ask the maker first, because outside service can void it.