Jewelry repair questions · Watches

Can a missing diamond or stone on a watch be replaced?

Often, yes, when the setting is intact. A diamond missing from a watch bezel, case or bracelet is matched and set much like one in a ring. A dial stone sits under the crystal, so it starts with a $19 Mail-In Evaluation. At JewelryRepair.com, setting one pavé diamond on a steel watch is $45, the diamond quoted separately.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$45Diamond Setting: one pavé diamond on a steel watch ($5 + $20 + $5 + $15), diamond quoted separately
$19Mail-In Evaluation for dial stones or anything unclear, credited in full
under 1/5 ctGIA's definition of melee, the small accent diamonds used on watch faces
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Bezel, case, lugs or bracelet: often replaceable when the setting is intact. These stones sit in small metal settings, such as beads, channel walls or prongs, and a setter works on them much as on a ring.
  • Dial: sometimes. The dial sits under the crystal, and whether its stones can be worked on safely depends on the dial and how they're fixed, so it starts with an evaluation.
  • Matching matters as much as setting. GIA notes that melee differing by as little as 0.20 mm may be noticeable, and that melee darker or lighter than the center stone looks out of place; on a watch the same logic applies to the stones around the empty seat.
  • One missing stone is a warning. The knock or wear that freed it may have loosened its neighbors too.

Prices

Service PriceWhat's included
Diamond Setting from $45 steel watch, one diamond, pavé
from $49 18K yellow gold watch, one diamond, pavé
Matching, sourcing and setting a small diamond on a watch bezel, case or bracelet: the empty seat measured, the surrounding stones read for color and brightness, and the diamond leveled and locked in by the setting's own method. A diamond you found is set as supplied; one we source is quoted separately for your approval.
Gemstone Replacement & Setting from $52 steel watch, one stone, pavé
from $49 18K yellow gold watch, one stone, pavé
Setting labor for a stone you supply, or a colored stone we source, on a watch bezel, case or bracelet: the seat inspected and trued, the stone leveled and locked in by the setting's own method. A stone we source is quoted separately for your approval.
Gemstone Replacement from $52 colored stone, steel watch, pavéMatching and sourcing for a missing colored stone, such as a sapphire or ruby on a bezel: candidate stones sent for your approval before anything is set, and nothing owed for stones if none suits.
Mail-In Evaluation $19The starting point for a dial or crown stone, glued-in rhinestones, a broken setting or any watch where you're not sure what's involved: examined under magnification, photographed and quoted item by item. Credited in full toward the work you approve.
Water-Resistance Pressure Test from $175A documented chamber test against the stated depth rating, worth having after a case has been opened for dial work. Resealing is quoted if it fails.

Where the stone sat changes the job

  • Bezel. The ring around the crystal is the most exposed edge of a watch, so a gem-set bezel takes the knocks. Small bezel stones are usually set in rows held by beads or between channel walls, and a stone that can be reached with the bezel in place is a setting job. Anything more involved is assessed first.
  • Case and lugs. Stones on the sides of the case or along the lugs are handled like bezel stones when they sit in beads, channels or prongs.
  • Bracelet links and clasp. These stones sit in the band rather than the watch head, so the case isn't opened.
  • Dial. Stones used as hour markers or set around the dial sit under the crystal. Dials are delicate, so the evaluation looks at whether the dial can be worked on safely. If it can, reaching the stones means opening the case and taking the movement, hands and dial out, and that is quoted item by item before anything is done.
  • Crown. A stone or cabochon in the crown is assessed with the watch in hand rather than priced sight unseen.

When it can't be done. If the beads, prongs or channel wall that held the stone have broken off, there's nothing to set into until the metal is rebuilt; the evaluation shows that with photos and a price before any work. If a dial looks unsafe to work on, we say so before touching it; leaving the seat empty may be the better choice. See also watch bezel.

Why stones go missing from watches

  • Knocks. The bezel takes the hits when a watch meets a door frame or a desk.
  • Worn or flattened metal. GIA's design guide describes pavé as stones set in three or more rows with hand-raised beads that hold them in place. A worn or flattened bead lets its stone go, and GIA notes that prong tips that aren't flush can snag and break.
  • A stone that was already loose. GIA warns that a diamond loose in its setting can wear through a prong over time, so a stone that moved last month can be gone this month.
  • Cleaning machines. GIA says ultrasonic and steam cleaners can loosen gemstones in their settings, which is why professionals check stones before using them.
  • Glue. Rhinestones on fashion watches are often glued in rather than held by metal. Wikipedia describes rhinestones as a diamond simulant made from crystal glass or polymers such as acrylic. If no bead, prong or metal rim held the stone, adhesive did.

Matching the stone

GIA defines melee as diamonds weighing less than 1/5 carat, as small as 0.001 ct, and mentions them as accents on watch faces. GIA says not to expect grading reports for melee, because grading costs too much relative to its value. So a match is made by measurement and by eye, not by certificate:

  • The empty seat is measured, since GIA's design guide says melee differing by as little as 0.20 mm may be noticeable.
  • The neighbors are read for color and brightness. GIA warns that melee darker or lighter than the center stone looks unattractive; on a watch, our jewelers apply the same test against the stones around the empty seat, because a stone that's too white or too bright stands out.
  • Colored stones are harder. Two sapphires of the same size can be entirely different blues, so a colored stone is matched as its own step and you approve it before it's set.
  • If you found the original, send it: seal it in a small bag inside the package and choose "I have the diamonds" or "I have the stones" on the repair page. If its seat has worn or distorted, it may need re-cutting first, which is Reset Loose Stone ($89 flat); you're told before that work is done.

If the maker set the stones and you'd rather have a factory bezel or dial, that's a question for the maker. For stones in rings and other jewelry, our guide to stone replacement cost covers setting labor versus stone cost.

How a jeweler does it

The watch is photographed when it arrives, before anything else, and the photos appear in your account. A jeweler then examines every stone under magnification, not just the empty seat. If neighbors are loose or a setting is damaged, work pauses and you get photos, a plain-English explanation and an itemized update; nothing beyond what you approved is charged.

Setting is precision work done under a microscope. The setter inspects and trues the seat, the small ledge cut into the metal that carries the stone, then levels the stone and locks it in using the setting's own style: pavé beads raised and pushed, channel walls tightened, prongs burnished over the edge of the stone, or a bezel rubbed evenly around its rim. The watch is cleaned and polished, a second jeweler checks the work, and it's photographed again before it ships.

A dial stone is different. The evaluation looks at the dial and how its stones are fixed; only if it can be worked on safely is opening the case, removing the movement, hands and dial, and resealing quoted, item by item, before anything is done. If water resistance matters to you, a documented pressure test checks the seal afterward.

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. The repair pages price the setting labor; a stone we source is quoted separately for your approval. The rule in one line: a missing diamond goes through Diamond Setting, a missing colored stone through Gemstone Replacement, and a stone you already have through Gemstone Replacement & Setting.

  • Diamond Setting matches, sources and sets diamonds. It has no Watch item type, so choose Other for the watch head or Bracelet for a link. One small diamond on a stainless steel watch, pavé: $45 ($5 base + $20 steel + $5 pavé + $15 per diamond). Prong instead is $40, channel $50. On 18K yellow gold, one pavé diamond is $49 ($5 + $9 + $15 + $5 + $15).
  • Gemstone Replacement & Setting is setting labor for a stone you supply, and can be booked for a watch. One small stone (under 0.5 ct) on a stainless steel watch, pavé: $52 ($5 base + $23 steel + $18 per stone + $6 pavé). Prong is $46, channel $58.
  • Gemstone Replacement matches and sources a missing colored stone, such as a sapphire on a bezel: $52 in setting labor for one stone on a steel watch, pavé ($23 + $23 + $6), with stone options sent for your approval; if none suits, nothing is owed for stones.
  • Mail-In Evaluation: $19, credited in full, for a dial or crown stone, glued-in rhinestones, a damaged setting, or any watch where you're not sure what's involved.

JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand, and we match stones rather than supply factory parts. If your watch is under the maker's warranty or a service plan, check with the maker first, because outside work can void it. Shipping is $30 round trip by UPS with $100 of coverage each way; full value up to $10,000 costs 2.5% of the value above $100, so covering a $4,000 watch is $97.50 (2.5% of $3,900), both directions. The work is done at the New York studio, and the 1-year workmanship guarantee covers a stone the bench set that loosens. Sky Jewelry, the family jewelers on Lenox Avenue since 1989 behind JewelryRepair.com, has completed over 50,000 repairs since 1989.

Before you ship

  • Stop wearing it until it's fixed, since neighboring stones may be loose too.
  • If you found the stone, seal it in a small bag and pack it with the watch.
  • Note which position is empty, or photograph it, and mention any other stones that move or look dark.
  • Don't glue a stone back in. The glue has to be removed before a stone can be set properly; see can I glue a stone back in?
  • Pack the watch so it can't shift, in a plain box with nothing on the outside naming the contents, with the prepaid UPS label from your account, and drop it at any UPS location. A signature is required on delivery both ways.

Questions

How much does it cost to replace a diamond on a watch bezel?
At JewelryRepair.com, Diamond Setting for one small diamond on a stainless steel watch is $45 pavé-set ($5 base, $20 for steel, $5 for pavé, $15 per diamond), $40 prong-set, or $49 pavé on 18K yellow gold. A diamond we source is quoted separately for your approval before it's set, and one you found is set as supplied. A stone on the dial starts with the $19 Mail-In Evaluation, credited in full.
Can a jeweler replace a stone on a watch dial?
Sometimes; it depends on the dial and how its stones are fixed. Dial stones sit under the crystal, so reaching them means opening the case and taking the movement, hands and dial out, and some dials aren't safe to work on. JewelryRepair.com starts dial stones with the $19 Mail-In Evaluation, credited in full, and sends photos and an itemized quote before any work is done.
Will a replacement diamond match the others on my watch?
It should, if it's chosen by measurement and by eye. GIA notes that melee differing by as little as 0.20 mm may be noticeable, and that melee darker or lighter than the center stone looks out of place. On a watch, the jeweler measures the empty seat, reads the surrounding stones for color and brightness, and you approve the diamond and its price before Diamond Setting ($45 pavé on steel) sets it.
Will replacing a stone void my watch warranty?
It can. If the watch is still under the maker's warranty or a service plan, check with the maker first, because outside work can void that coverage. JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand, and we match stones rather than supply factory parts. Once the warranty has ended, setting one pavé diamond on a steel watch here is $45.
Can you replace a missing diamond on a watch bracelet?
Yes, when the link's setting is intact. Stones in bracelet links and clasps sit in the band, so the watch case isn't opened. At JewelryRepair.com, Diamond Setting with Bracelet as the item type is $45 for one pavé diamond on stainless steel ($5 + $20 + $5 + $15), with a sourced diamond quoted separately. If the beads or prongs have worn away, the $19 Mail-In Evaluation prices the rebuild first.